001-104 Ducato MY GB - iinet

When refitting the bench seat, make
sure it is firmly locked by pressing pedal
A-fig. 71 (as specified on the label).
Label green mark (A) on the mobile
part of the bench seat shall be aligned
with the green mark (B) on the fixed
part of the bench seat, as shown in fig.
70.
fig. 71
50 GETTING TO KNOW YOUR VEHICLE
F0D0287m
HEAD RESTRAINTS
Front head restraints are adjustable
in height.
To adjust:
– press button A-fig. 71a and move
the head restraint up or down to the
required position;
– then, release the button and move
again the head restraint up or down to
check whether they are properly
locked in the required position.
fig. 71a
F0D0184m
WARNING
Remember that the head
restraints should be adjusted
to support the back of your head
and not your neck. Only if they are
in this position will they be able to
provide effective protection.
To lower it back to its original position:
press the release button Afig.
71a and lower the head restraint
until refitting it into its seat on the
backrest.
Removal
To remove the rear seat head restraints:
1) raise the head restraint to the first
click
2) press button A-fig. 71a and then
remove it.