001-104 Ducato MY GB - iinet

Wrapping the bench seat
If after tilting, bench seat wrapping
is required, pull the two levers Afig.
66 set under the backrest (as
specified on the plate) and tilt forward
the entire bench seat row (fig. 67).
fig. 66
fig. 67
F0D0284m
F0D0285m
Removing the bench seat
IMPORTANT The bench seat
(weighing 75 kg) shall be removed by
two people at least.
To remove the bench seat, lift and
then pull the two levers A-fig.68 (as
specified on the label). Make sure both
levers B-fig.69 are in “released” position
(as specified on the label) (pin C
visible).
fig. 68
F0D0286m
The bench seat is properly released
when the red mark on label (A) on the
mobile part of the bench seat (fig. 70)
is aligned with the green mark (B) on
the fixed part of the bench seat.
fig. 69
fig. 70
GETTING TO KNOW YOUR VEHICLE
49
F0D0293m
F0D0296m