You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPRAY NOZZLES<br />
Windscreen washer<br />
If there is no jet of liquid, first make<br />
sure that there is liquid in the reservoir:<br />
see “Checking fluid levels” in this<br />
section. Then make sure that the<br />
holes in the nozzles are not clogged<br />
up fig. 19. Use a pin to open the nozzles<br />
if necessary. The windscreen jets<br />
are directed by adjusting the inclination<br />
of nozzles. Direct the spray so<br />
that it reaches the highest point<br />
reached by the brushes.<br />
fig. 19<br />
F0D0125m<br />
Headlight washer<br />
If there is no jet of liquid, first make<br />
sure that there is liquid in the reservoir.<br />
Then make sure that the holes<br />
in the nozzles fig. 20 are not clogged<br />
up. Use a pin to open the nozzles if<br />
necessary.<br />
fig. 20<br />
F0D0122m<br />
BODYWORK<br />
PROTECTING THE VEHICLE<br />
FROM ATMOSPHERIC<br />
AGENTS<br />
The main causes of rust are:<br />
– atmospheric pollution;<br />
– salt and humidity in the atmosphere<br />
(coastal or very hot and humid<br />
areas);<br />
– environmental conditions that are<br />
specific to the season.<br />
In addition, the abrasiveness of dust<br />
in the atmosphere and sand carried by<br />
the wind as well as mud and stones<br />
kicked up by other vehicles must not<br />
be underestimated.<br />
For your vehicle, Fiat has used leading-edge<br />
technological solutions to effectively<br />
protect the body from rust.<br />
These are the most important:<br />
– painting systems and products that<br />
make the vehicle particularly resistant<br />
to rust and scratching;<br />
VEHICLE MAINTENANCE<br />
181