001-104 Ducato MY GB - iinet

WINDSCREEN
WIPER
BLADES
Periodically clean the rubber part
with suitable products. We recommend
TUTELA PROFESSIONAL
SC35.
Change the blades if the rubber edge
is warped or worn out. You should in
any case change them approximately
once a year.
180 VEHICLE MAINTENANCE
Some simple steps can reduce potential
damage to the blades:
– if the temperature falls to below
zero, make sure the rubber blade is
not frozen to the windscreen. If necessary,
free it with a de-icing compound;
– remove any snow that has settled
on the glass: besides saving the blades
you will avoid straining the electric
windscreen wiper motor and causing
it to overheat;
– do not operate the windscreen or
rear window wipers on dry glass.
WARNING
Travelling with worn wiper
blades is dangerous because
it reduces visibility in bad
weather.
Changing the windscreen
wiper blade
1) Lift windscreen wiper arm Afig.
18 off the glass and position the
blade so as to form a right angle with
the arm.
2) Press tab B on the retainer and
remove the blade to be replaced from
arm A .
3) Fit the new blade by inserting the
tab into the special slot in the arm.
Make sure it is properly locked into
place.
fig. 18
F0D0123m