001-104 Ducato MY GB - iinet

For rear central bench seat,
lap belt without retractor
(Combi versions)
To fasten the seat belt: insert the
fastener tongue A-fig. 14 into the
buckle B until hearing the locking
click.
Side seats are fitted with seat belts
with three anchor points.
To unfasten the seat belts: press
button C.
To adjust the seat belt: slide the webbing
through adjuster D, pulling end E
to shorten it and length F to lengthen
it.
IMPORTANT The belt is adjusted
properly when it fits closely across
the hips.
fig. 14
F0D 0002m
WARNING
Remember that in the case
of a violent collision, back
seat passengers not wearing seat
belts also represent a serious danger
to the passengers in the front
(Panorama, Combi and CrewCab
versions).
For rear central bench seat,
seat belt with retractor
(Combi versions)
Rear bech seat is fitted with three
point belt and retractor for central
seat.
fig. 15
F0D0291m
Belt use is shown in fig. 15
WARNING
The rear central seat belt
safety action is only guaranteed
when the bench seat backrest
is tilted backwards completely
(see figure 15a).
fig. 15a
GETTING TO KNOW YOUR VEHICLE
F0D0298m
17