27.11.2012 Views

001-104 Ducato MY GB - iinet

001-104 Ducato MY GB - iinet

001-104 Ducato MY GB - iinet

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

ENGINE OIL<br />

Fig. 5: 2.0 versions<br />

Fig. 6: 2.0 JTD versions<br />

Fig. 7: 2.3 JTD versions<br />

Fig. 8: 2.8 JTD - 2.8 JTD POWER<br />

versions<br />

Check engine oil with the vehicle on<br />

level ground and while the engine is<br />

still warm (approximately 10 minutes<br />

after stopping the engine). The oil<br />

level should be included between the<br />

MIN and MAX reference lines on<br />

the dipstick.<br />

The gap between MIN and MAX<br />

reference lines corresponds to approximately<br />

2 litres oil.<br />

The oil level must never exceed the<br />

MAX line.<br />

fig. 5<br />

F0D0063m<br />

WARNING<br />

Be very careful under the<br />

bonnet: you risk burning<br />

yourself. Remember that when the<br />

engine is hot, the fan can start up<br />

and cause injuries.<br />

If the oil level is near or even below<br />

the MIN line, pour in oil through the<br />

filler hole until it reaches the MAX<br />

line.<br />

gine.<br />

fig. 6<br />

Do not add oil with different<br />

specifications from<br />

the oil already in the en-<br />

F0D0064m<br />

IMPORTANT After topping up or<br />

changing the oil, let the engine turn<br />

for a few seconds and wait a few minutes<br />

after stopping it before you check<br />

the level.<br />

fig. 7<br />

fig. 8<br />

VEHICLE MAINTENANCE<br />

169<br />

F0D0211m<br />

F0D0183m

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!