001-104 Ducato MY GB - iinet

2) disconnect connector B-fig. 25;
3) press the two retaining clips Cfig.
26 and remove the bulb holder;
fig. 25
fig. 26
F0D0158m
F0D0159m
4) remove the bulb D pushing it
slightly and turning it anticlockwise;
5) replace the bulb, refit the bulb
holder, reconnect connector B and
refit it all fastening the two bolts without
forcing them.
fig. 27
F0D0110m
NUMBER PLATE LIGHT
To replace the bulb D-fig. 28 proceed
as follows: insert the screwdriver
in housing A-fig. 27 push the unit
rightwards and remove the bulb holder
B-fig. 28 by pressing tab C. The
glass bulb D is clipped in.
fig. 28
IN AN EMERGENCY
F0D0111m
147