001-104 Ducato MY GB - iinet

IF AN EXTERIOR
BULB BURNS OUT
For the type of bulb and power refer
to paragraph “If a bulb burns out”
in this section.
fig. 9
F0D0000m
MAIN AND DIPPED BEAM
HEADLIGHTS
To replace a halogen bulb with headlight
disconnected, proceed as follows:
1) loosen the four screws and remove
the front grid A-fig. 9;
2) loosen the two fastening screws
B-fig. 10 and remove the headlight releasing
pin D-fig. 11 from C;
3) release the retaining clips A-fig.
12 and remove the cover B;
4) remove the connector C or Efig.
13;
fig. 10
F0D0175m
5) release the two retaining clips D
or F-fig. 14 and remove bulbs G or
H-fig. 14.
G - main beam headlight bulb
H - main beam headlight bulb.
fig. 11
fig. 12
IN AN EMERGENCY
143
F0D0176m
F0D0096m