001-104 Ducato MY GB - iinet

IF A BULB
BURNS OUT
WARNING
Modifications or repairs to
the electrical system carried
out incorrectly and without
bearing the features of the system
in mind can cause malfunctions
with the risk of fire.
WARNING
You should have the bulbs
replaced at a Fiat Dealership,
if possible. Correct operation
and proper beam height are essential
for safe driving and compliance
with law requirements.
WARNING
Halogen bulbs contain
pressurised gas which, if
broken, may cause small fragments
of glass to be projected outwards.
Only touch the metal
part when handling halogen
bulbs. If the transparent
bulb is touched it reduces the
intensity of the light emitted and
can also reduce the life of the
bulb. If you touch the bulb accidentally,
rub it with a cloth
moistened with alcohol and leave
it to dry.
IMPORTANT On the inside surface
of the headlight there could appear
a slight coat of fogging; this does
not show a defect, since it is a natural
occurrence due to low temperature
and to the degree of humidity in the
air; it will disappear as soon as the
lights are turned on. The presence of
drops inside the headlight shows water
seepage, contact Fiat Dealership.
GENERAL INSTRUCTIONS
When a light is not working, check
that it has not fused before changing
the bulb.
For the location of the fuses, refer to
“If a fuse blows” in this section.
Before replacing a bulb that does not
work, check that the contacts are not
oxidised.
Burnt-out bulbs must be replaced
with ones of the same type. Light from
bulbs with insufficient power is dim
while those which are too powerful
use too much electricity. Always check
the height of the headlight beam after
changing a bulb.
IN AN EMERGENCY
141