001-104 Ducato MY GB - iinet

The moving parts of the jack (screw
and joints) may also cause injury if
touched. Clean off any grease.
6) Unscrew the five bolts completely
using wrench E-fig. 6 and remove
the wheel.
fig. 6
140 IN AN EMERGENCY
F0D0090m
7) Fit the spare wheel making sure
that the pegs H fit into holes G-fig. 7.
When fitting the spare wheel, make
sure the hub is clean so that the fixing
bolts will not loosen.
8) Tighten the five wheel bolts.
9) Lower the vehicle with the ratchet
wrench and pull the jack out.
10) Fasten bolts completely, working
in a criss-cross fashion as shown in
fig. 7.
fig. 7
F0D0089m
When you have finished:
– place the wheel you have changed
in the spare wheel support;
– hook the spare wheel support, using
wrench E;
– screw the two fastening bolts and
position the two plastic caps;
– put the jack and the tools back in
the bag under one of the two seats in
the cab.