001-104 Ducato MY GB - iinet

Truck and Chassis cab versions -
fig. 12
An additional tow hitch - specific for
chassis cab and truck versions is shown
in fig. 12. The structure Ø must be secured
to the points shown with a total
of twelve M 10 screws.
Fit the tow hitch with the light cluster
crossmember in its original position. If
the crossmember has been removed,
replace it with another crossmember
of the same size and resistance.
IMPORTANT Fasten a tag in
clearly visible position at the same
height as the tow hitch. This tag is
compulsory. It must be adequately
sized, made of suitable material and
carry the following information:
MAX ADMITTED LOAD ON
HITCH 80 kg.
WARNING
After assembly, seal the fastening
screw holes to prevent
exhaust fumes from entering
the vehicle.
fig. 12
Holes to bore
Existing holes
Vehicle centre line
2 shims
2 shims
Holes to bore
GETTING THE BEST OUT OF YOUR VEHICLE
131
F0D0243m