001-104 Ducato MY GB - iinet

ELECTRONIC
AUTOMATIC
GEARBOX
(2.8 JTD versions
only)
The automatic gearbox fitted on Fiat
Ducato features four speeds plus
reverse with self-adapting control (i.e.
capable of adapting to the driver’s driving
style), which transmits power
continuously and with very fast electro-hydraulic
gear engagement times.
STARTING THE ENGINE
The engine can be started only with
the gearshift lever in the P or N position.
For safety reasons, it is advisable to
start the engine with the brake pedal
pressed.
IMPORTANT When moving off after
starting the engine, do not press
the accelerator pedal before and during
the movement of the gearshift
lever. This is particularly important
when the engine is cold.
110 GETTING THE BEST OUT OF YOUR VEHICLE
STARTING
After starting the engine, with the engine
idling and keeping the brake pedal
pressed, move the gearshift lever to
position D. Release the brake pedal
and gradually press the accelerator
pedal.
IMPORTANT Movement of the
lever from position P is allowed only
with the ignition key at MAR and the
button on the lever and the brake pedal
pressed.
Do not attempt to obtain
peak performance
until the engine has
reached normal operating temperature.
fig. 3
F0D0236m
STOPPING THE VEHICLE
To stop the vehicle, simply press the
brake pedal regardless of the position
of the gearshift lever.
IMPORTANT Removing the ignition
key is only allowed with the
gearshift lever in position P and for a
maximum time of 30 seconds from
when the engine is turned off P, when
the door is opened a buzzer will sound
for about 15 seconds to alert the driver.
In the case of an emergency (faults,
flat battery, etc.) the ignition key can
be removed from the switch fitting a
screwdriver in hole in fig. 3 set under
the ignition switch and pressing upwards
WARNING
With the engine idling, also
on a level surface, and the
gearshift lever in position D or R,
the vehicle tends to move if the
brake pedal is not kept pressed.