Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
If you are still unable to start the engine,<br />
perform the emergency start-up<br />
procedure (see “In an emergency”)<br />
and call your Fiat Dealership.<br />
When the vehicle is travelling and the<br />
key is at MAR:<br />
1) If the Y warning light comes on<br />
while the vehicle is moving, this means<br />
that the system is running a self-test<br />
(e.g. due to a voltage drop).<br />
2) If the Y warning light flashes, the<br />
vehicle is not protected by the engine<br />
immobiliser. Contact a Fiat Dealership<br />
immediately and get them to<br />
store the codes of all the keys in the<br />
memory.<br />
IMPORTANT The electronic components<br />
inside the key may be damaged<br />
if the key is subjected to sharp<br />
knocks.<br />
IMPORTANT Each key provided<br />
with the vehicle has its own code, different<br />
from all the others, which must<br />
be stored in the memory of the system<br />
control unit.<br />
DUPLICATE KEYS<br />
When additional keys are required,<br />
go to your Fiat Dealership, taking all<br />
the keys in your possession and the<br />
CODE card with you. The Fiat Dealership<br />
will store the old and new keys<br />
(up to eight) in the system. The Fiat<br />
Dealership may ask you to demonstrate<br />
that you own the vehicle.<br />
The codes of any keys that are not<br />
available when the new storage procedure<br />
is carried out will be deleted<br />
from the memory to prevent any lost<br />
or stolen keys being used to start the<br />
engine.<br />
All the keys and the CODE card<br />
must be handed over to the new owner<br />
when selling the vehicle.<br />
DOOR LOCK<br />
REMOTE CONTROL<br />
The radio-frequency remote control<br />
is built into the ignition key.<br />
The key fig. 6 includes the following:<br />
– a metal insert A that can be enclosed<br />
in the key grip<br />
– a button E for power-assisted<br />
opening of the metal insert<br />
– a button C for remote door unlocking<br />
and electronic alarm deactivation<br />
(where provided) at the same<br />
time, and timed switching on of the internal<br />
ceiling lights;<br />
– a button D for remote door locking<br />
and electronic alarm activation<br />
(where provided) at the same time,<br />
and switching off of the internal ceiling<br />
lights;<br />
– led B indicating control sending to<br />
electronic alarm system receiver.<br />
GETTING TO KNOW YOUR VEHICLE<br />
9
Change language