SEG IV-C - Off-Road-Light.RU

Assembly1 Insert column with2 pressure disc3 and clamping piece in4 the bushing.1110The colour markings onthe column and base mustbe above one another.5 Drive the dowel pin intothe column bore hole until thetwo projecting ends are thesame length.6 Set the beamsetter boxin place as shown in thediagram, with the7 actuating button pressed,and lower to working height.8 Set the sight vane holderonto the column and tightenusing the9 clamping wheel.Push the hand wheel 10firmly onto the hexagonalrod at the top end of thecolumn and secure usinga circlip 11 .19876Opening to adjust thecolumn guide using anAllen key size 6.Only necessary if thecolumn guide has toomuch play.35246