SEG IV-C - Off-Road-Light.RU

More documents

Recommendations

Info

OperationMeasurementThe key functions are identicalfor the following windows:F2F2: Switch between graphicaland numerical evaluation (see"Measurement" section).F4F4: Leave window.Fog lightThe image of the headlightappears on the display.- The upper window showsthe setting direction.- The reference corridor is inthe middle.- The actual position of theheadlight is shown as a thickblack line.Nodding angle: Nodding anglein %Angle of roll: Angle of roll in ∞Intensity:Light intensity in LuxGlare:Glare intensity in Lux24.0 lux2.0 %MSW SEND ESCLow beam rightSW:-1.3%Nodding angle: 2.0 %Angle of roll:Intensity:1.0°24.0 lxGlare:1.0 lxGRAF SEND ESC18Auxiliary light(daytime running light)The image of the headlightappears on the display.- The left-hand window showsthe setting direction.- The reference window is inthe middle.- The actual position of theheadlight is shown as a blackbox.Hot-spot x: Position of thehot-spot in the x-direction in%Hot-spot y: Position of thehot-spot in the y-direction in%Intensity: Light intensity of thecentral point in LuxInt. hot-spot: Light intensityl: 24.0 luxH: 42.0 luxMSW SEND ESCAuxiliary light rightHotspot x: 1.0 %Hotspot y: 0.8 %Intensity:24.0 lxInt. Hotspot:42.0 lxGRAF SEND ESC
OperationAdjustmentThis menu item is usedto set the headlights.1 Switch headlight on.F22 Press the F2 key to adjustthe headlights.Main menuPlease selectMESS JUST GW OFFMENUF1 F2 F3 F4The following window willappear with the pre-setreference values:F13 The reference value can bereduced or increased usingkeys F1 and F2 (press briefly).F3F24 Key F3 (press briefly) is usedto select the headlight type.Reference values-1.3% EC ESCF15 Keep the F1 key pressedlonger to switch over to truckreference values.F37 Keep the F3 key pressedlonger to switch over to lefthandtraffic.F26 Keep the F2 key pressedlonger to switch over topassenger car referencevalues.8 Press the required testingkey on the operating panel.The built-in camera thendigitalises the headlight imagedepicted on the projectionscreen.The reference valuesare taken over for futuremeasurements.High beamLow beamFog light19Daytime running light
Page 1 and 2: TechnicalManualF1 F2 F3SEG IV-C
Page 3 and 4: SafetyinstructionsIntroductionBefor
Page 5 and 6: Technical dataArea of applicationPa
Page 7 and 8: Product detailsMechanism1 Hand whee
Page 9 and 10: Test areaMobile SEG IV-CLevel floor
Page 11 and 12: Set-up andalignmentAlignment when t
Page 13 and 14: Definitionof termsLow beamA Cut-off
Page 15 and 16: OperationMenu overviewAn LCD displa
Page 17: OperationMeasurementThe key functio
Page 21 and 22: OperationAdjustmentThe key function
Page 23 and 24: OperationLimit value menuThe beamse
Page 25 and 26: EuropeanheadlightsLimit value menu1
Page 27 and 28: OperationService menuThe beamsetter
Page 29 and 30: OperationF1F2F3F4Service menu5 The
Page 31 and 32: OperationService menuLimit valuespa
Page 33 and 34: OperationService menuLimit values
Page 35 and 36: OperationService menuLimit values
Page 37 and 38: Spare parts1Hand wheel for sightvan

SEG IV-C - Off-Road-Light.RU

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?