SEG IV-C - Off-Road-Light.RU

OperationMeasurementThe key functions are identicalfor the following windows:F2F2: Switch between graphicaland numerical evaluation (see"Measurement" section).F4F4: Leave window.Fog lightThe image of the headlightappears on the display.- The upper window showsthe setting direction.- The reference corridor is inthe middle.- The actual position of theheadlight is shown as a thickblack line.Nodding angle: Nodding anglein %Angle of roll: Angle of roll in ∞Intensity:Light intensity in LuxGlare:Glare intensity in Lux24.0 lux2.0 %MSW SEND ESCLow beam rightSW:-1.3%Nodding angle: 2.0 %Angle of roll:Intensity:1.0°24.0 lxGlare:1.0 lxGRAF SEND ESC18Auxiliary light(daytime running light)The image of the headlightappears on the display.- The left-hand window showsthe setting direction.- The reference window is inthe middle.- The actual position of theheadlight is shown as a blackbox.Hot-spot x: Position of thehot-spot in the x-direction in%Hot-spot y: Position of thehot-spot in the y-direction in%Intensity: Light intensity of thecentral point in LuxInt. hot-spot: Light intensityl: 24.0 luxH: 42.0 luxMSW SEND ESCAuxiliary light rightHotspot x: 1.0 %Hotspot y: 0.8 %Intensity:24.0 lxInt. Hotspot:42.0 lxGRAF SEND ESC