SEG IV-C - Off-Road-Light.RU

OperationMeasurementThe key functions are identicalfor the following windows:F2F2: Switch between graphicaland numerical evaluation (see"Measurement" section).F4F4: Leave windowHigh beamThe image of the headlightappears on the display.- The left-hand window showsthe setting direction.- The reference window is inthe middle.- The actual position of theheadlight is shown as a blackbox.Hot-spot x: Position of thehot-spot in the x-direction in%Hot-spot y: Position of thehot-spot in the y-direction in%Intensity: Light intensity of thecentral point in LuxInt. hot-spot: Light intensityin the hot-spot in Luxl: 24.0 luxH: 24.0 luxMSW SEND ESCHigh beam rightHotspot x: 1.0 %Hotspot y: 0.8 %Intensity:24.0 lxInt. Hotspot:42.0 lxGRAF SEND ESCLow beamThe image of the headlightappears on the display.- The upper window showsthe setting direction.- The reference corridor is inthe middle.- The actual position of theheadlight is shown as a thickblack line.Nodding angle:Nodding angle in %G: Yaw angle in ∞R: Angle of roll in ∞KP: Salient point,X: in x-directionY: in y-directionIntensity:Light intensity in LuxGlare:Glare intensity in LuxLow beam right-1.3%25.0 lux-1.2 %MSW SEND ESCSW:Nodding angle: -1.2 %G: 12.0° R:0.0%KP: X: 1.3% Y: 0.5%Intensity:Glare:25.0 lx1.0 lxGRAF SEND ESC17