SEG IV-C - Off-Road-Light.RU

More documents

Recommendations

Info

Set-up andalignmentPreparing the vehicleThe tyres must have theprescribed pressure!The vehicle must be loadedas follows:a) Cars, with one person or75 kg on the driver seat withthe vehicle otherwiseunloaded.b) Trucks and other multi-trackvehicles are to be withoutload.c) Single-track vehicles as wellas single-axle traction orworking machines (with seatcart or trailer): with one personor 75 kg on the driver seat.In the case of hydraulic or airsuspension the engine has torun at medium speed until theheight of the vehicle no longerchanges.If automatic correction of theheadlight or an infinite or 2-stage setting fixture isavailable, heed themanufacturer's instructions.National regulations mustalways be heeded.Setting up the <strong>SEG</strong> <strong>IV</strong>-CDevices with caster basesmust be aligned individuallyfor each headlight to betested. Units on rails only needto be aligned once for eachvehicle.Pull out the integrated tapemeasure. Check the distancefrom the front edge of thebeamsetter box to theheadlight. (approx. 30 cm tomax. 70 cm)30 - 70 cmFix the sight vane holder inplace at the top end of thecolumn.The spots sighted on thevehicle must be significantlylower than the height of thesight vane.Release the column fixingmechanism.Switch on the laser.Align the laser sight vane insuch a way that the lasertouches two points at thesame height and symmetricalto the longitudinal axis of thevehicle.Tighten the column fixingmechanism without shiftingthe alignment.Release the clamping screwto move the laser sight vaneto the right or left for easiersighting.10
Set-up andalignmentAlignment when the frontof the vehicle is extremelyvaultedIf alignment is difficult in individualcases of commercialvehicles and buses withextremely vaulted front ends,the centres of the headlightsmust be transferred to thefloor using a plumb bob orother suitable object andrecorded using the sight vane.11
Page 1 and 2: TechnicalManualF1 F2 F3SEG IV-C
Page 3 and 4: SafetyinstructionsIntroductionBefor
Page 5 and 6: Technical dataArea of applicationPa
Page 7 and 8: Product detailsMechanism1 Hand whee
Page 9: Test areaMobile SEG IV-CLevel floor
Page 13 and 14: Definitionof termsLow beamA Cut-off
Page 15 and 16: OperationMenu overviewAn LCD displa
Page 17 and 18: OperationMeasurementThe key functio
Page 19 and 20: OperationAdjustmentThis menu item i
Page 21 and 22: OperationAdjustmentThe key function
Page 23 and 24: OperationLimit value menuThe beamse
Page 25 and 26: EuropeanheadlightsLimit value menu1
Page 27 and 28: OperationService menuThe beamsetter
Page 29 and 30: OperationF1F2F3F4Service menu5 The
Page 31 and 32: OperationService menuLimit valuespa
Page 33 and 34: OperationService menuLimit values
Page 35 and 36: OperationService menuLimit values
Page 37 and 38: Spare parts1Hand wheel for sightvan

SEG IV-C - Off-Road-Light.RU

Create successful ePaper yourself

Delete template?

Save as template?