LED-Strip C100

LED-Strip C100The LED-Strip C100 is based onthe successful LED-Strip C25.Each high-bin LED is individuallycontrolled for maximumcreative flexibility. Set elements,edges, and borders can befinely highlighted with bright,colorful graphics and animatedvideo effects.High-bin RGB LEDs with 100 mmpitch on 20- or 40-inch strips.RGB mixing within each LEDhelps avoid multicolored rainbowshadows.Each LED is individually colorcalibrated for consistent andaccurate reproduction of whitesand pastel shades.The DMX converter is integratedin the strip for simple wiringand fast system setup.Power and data can be suppliedfor up to 68 strips usinga System Power Supply 4E. Alladdressing takes place withinthe power supply, eliminatingthe need for individual unitaddressing.Ethernet interface allows controlwith lighting consoles, mediaservers, or video converters.

LED-Strip C100Features· 10 Nichia-RGB LEDs individuallycontrolled· All LEDs individually colorcalibrated· RGB color mixing· Smooth dimming with Lehmannmodulation· Camera-friendly dimmingElectrical· Optimum input voltage: 24VDC· Current draw (RGB at 100%):0.3A· Power consumption (RGB at100%): approx. 4.6W (plusPSU power consumption)· Connectivity: 4-pin systemconnector (red), in- and output· Pin connectors: Ground (1),DMX- (2), DMX+ (3), +24VDC (4)· Dimensions:C100-500: 20x0.6x0.4 in(500x15x10 mm)C100-1000: 40x0.6x0.4 in(1000x15x10 mm)· Weight: 0.63 oz (18 g)(plus cable and mounts)System Accessories· System Power Supply 4E· XLR adapter board MK2· PCB cables· Pixel-Gate· PCB mounts: Self-adhesive,push-through, screw-in19.69 (500)3.94 (100)0.59 (15)1.97 (50)5.91 (150)5.91 (150)1.97 (50)5.91 (150)39.37 (1000)3.94 (100) 3.94 (100) 3.94 (100)5.91 (150) 5.91 (150) 5.91 (150)0.59 (15)Dimensions in inches (mm)Electrostatic Discharge (ESD) can damage sensitive electronic equipment. We recommend the use of anti-static bracelets when installing or servicing our products.Also, the polishing of glass or plastic surfaces in the vicinity of our products should be avoided to prevent buildup of static electricity. Suitable anti-static packagingmaterials should always be used to transport our products. Ordinary plastic packaging materials such as air-cushioned bags and bubble-wrap, are not suitablealone. For safety reasons, only products and accessories designed by Schnick Schnack Systems GmbH should be used in conjunction with our LED components.System specifications may change without notice. No part of this document may be reproduced without permission.LITS3C100STRIP-060512