midas GTS Release Note midas GTS 2010 v1.1Release ... - CSP Fea

More documents

Recommendations

Info

midasGTSEnhancements midas GTS 2010 v1.1 Release Notes3. 1D (Beam / Truss) Element Axial Force OutputModified Contents• In V1.1, axial force results for both truss elements and beam elements are displayed as one label. In V300,they should have been checked separately.• Post Works Tree > 1D Element Forces1D Element Forces Results (V300)1D Element Forces Results(V1.1)26 / 34
midasGTSEnhancements midas GTS 2010 v1.1 Release Notes4. Beam Element Coordinate System (2D Modeling)Modified Contents• The working plane in 2D modeling is only defined in the X-Y plane. Accordingly, the beam elementcoordinate system is used for X-Z axes onlyUsage• In V300, bending moment results for beam elements were checked using My or Mz, depending on theelement coordinate system. In V1.1, however, the bending moment results can be checked only through „1DElement Forces > Beam My.‟• Post-Works Tree > 1D Element ForceBeam Element (V300)Bending Moment Results (V300)-Beam MzBeam Element (V1.1)Bending Moment Results (V1.1)-Beam My27 / 34
Page 1 and 2: midas GTS 2010 v1.1 Release NotesNe
Page 3 and 4: Enhancements8. Automatic Considerat
Page 5 and 6: midasGTSEnhancements midas GTS 2010
Page 25: midasGTSEnhancements midas GTS 2010

midas GTS Release Note midas GTS 2010 v1.1Release ... - CSP Fea

Create successful ePaper yourself

Delete template?

Save as template?