Linear actuator with track roller guidance system and toothed belt ...

More documents

Recommendations

Info

Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Safety guidelines for linear actuatorsUse for the intended purposeGeneral safety guidelinesRisk reductionFundamental instructionsThe linear actuator is intended exclusively for moving machinecomponents connected to the carriage.Any other use is not for the intended purpose and is thereforeimpermissible. The Schaeffler Group accepts no liability for anydamage or loss arising therefrom.❑ Any actions and methods that endanger the safety of humanbeings must not be carried out.❑ In all fitting and maintenance work, the following must beobserved:– all nationally valid and relevant specifications forthe prevention of accidents– all generally recognised rules of safety practice andoccupational medicine.The linear actuator is constructed in accordance with the currentlevel of technology and the recognised rules of safety practice.Nevertheless, while it is being used the user or third parties may beput at risk or the linear actuator and other material assets may beimpaired.Risks can be reduced by observing the following points:❑ The linear actuator should only be operated if it is free fromtechnical defects.❑ The linear actuator should only be used for the intended purposeand with an awareness of safety and hazards.❑ If any malfunctions occur that have safety implications,the linear actuator must be stopped immediately and themalfunction rectified by a person with appropriateresponsibility.The assembly and fitting of the linear actuator as well as the fittingand dismantling of the individual components must only be carriedout as described in this manual:❑ Carry out the operations in the specified sequence.❑ Use the listed tools and fitting accessories correctly.Tools and fitting accessories that are unsuitable, damaged orcontaminated will impair the function of the linear actuator.❑ Screws must only be tightened using a torque wrench andthe specified torques must be observed.❑ Use rubber hammers only, not metal hammers.❑ Do not use pointed or sharp-edged tools.Industrial Technologies6 MON 73 Schaeffler Group Industrial
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Personnel selectionand qualificationProviding information to personnelDisclaimer of liabilityUse of replacement partsUse of products from other sourcesDisclaimer of liabilityPersons charged with the fitting and maintenance of thelinear actuator must have adequate qualification. They mustreceive appropriate training and instruction before carrying outfitting or maintenance work.The fitting and maintenance manual must be available in a suitableform to the nominated persons (for example as a printout).This includes drawing explicit attention to the hazard and safetyguidelines in this manual.The Schaeffler Group does not accept any liability for harm tohuman beings, the linear actuator and the adjacent constructionthat can be attributed to:■ incorrect fitting■ incorrect or inadequate maintenance■ incorrect communication of the content to third parties ora failure to communicate the content.Special INA replacement parts have been developed for the linearactuator MLFI25-ZR. These ensure the reliable and long termfunction of the linear actuator.❑ Do not use replacement parts other than original replacementparts from INA, see page 41.The use of products from other sources instead of INA replacementparts can:■ change the characteristics of the linear actuator in a negativemanner■ endanger users or third parties■ cause impairment to the linear actuator and other materialassets.The Schaeffler Group accepts no liability for any damage or lossarising from the use of products from other sources.Industrial TechnologiesSchaeffler Group Industrial MON 73 7
Page 2 and 3: Индастриал Техноло
Page 46: Индастриал Техноло

Linear actuator with track roller guidance system and toothed belt ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?