Linear actuator with track roller guidance system and toothed belt ...

More documents

Recommendations

Info

Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94VariantsMultiple carriagesFitting of multiple carriagesFixing the toothed beltbetween carriagesFigure 29Linking carriagesusing separate piece of toothed beltFitting the toothed beltIf the linear actuator has more than one carriage, these are linked byindividual pieces of toothed belt.The following tools are required:■ rubber hammer■ torque wrench■ Allen key or hex key inserts■ screwdriver.✓ All carriages slid onto raceway shafts, see page 29 to page 31.❑ Fit short pieces of toothed belt with clamping devices and usethese to link the carriages, see page 36.❑ Fit the long piece of toothed belt, see page 34 onwards.00015EFDIndustrial Technologies40 MON 73 Schaeffler Group Industrial
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Replacement partsNote!The precise design of your linear actuator is dependent on yourorder. When ordering replacement parts, please indicatethe ordering number of your linear actuator. The ordering numbercan be found engraved on one side of the support rail.Toothed beltReplacement parts listfor toothed beltDrive unitReplacement parts listfor drive unitLinear actuator Designation MATNRMLFI25-ZR ZHRI25-AT-5 001288261-0000Linear actuator Designation MATNRDrive shaft on left or right sideMLFI25-ZR WE.MLFI25-ZR-AR-7800 001256319-0000Drive shaft on both sidesMLFI25-ZR WE.MLFI25-ZR-RL-7800 002454599-0000Industrial Technologies00015F0100015EFCSchaeffler Group Industrial MON 73 41
Page 2 and 3: Индастриал Техноло
Page 46: Индастриал Техноло

Linear actuator with track roller guidance system and toothed belt ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?