Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Fitting <strong>and</strong> mounting of componentsInserting the spacer❑ Measure the gap between the clamping device <strong>and</strong> carriage usinga vernier.❑ Select one spacer corresponding to the width of the gap.If a single spacer is not sufficient, select 2 or more spacers thattogether correspond to the width of the gap.❑ Insert the spacer in the gap between the carriage <strong>and</strong> clampingdevices.❑ Tighten both clamping devices <strong>with</strong> a torque of M5/5,5 Nm tothe hard stop.Industrial Technologies38 MON 73 Schaeffler Group Industrial