Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Fitting <strong>and</strong> mounting of componentsDrive unit <strong>and</strong> return unit A component overview is shown in Figure 11, page 25.The following tools are required:■ snap ring pliers.✓ Carriage fitted, see page 29 to page 31.Fitting the drive unitor return unitFitting the <strong>toothed</strong> <strong>belt</strong> pulleyFigure 21Fitting the snap ringFinishing the fitting procedureThe drive unit <strong>and</strong> return unit differ according to the design.However, both components are mounted in the same way.Damage to the <strong>toothed</strong> <strong>belt</strong> pulley <strong>and</strong> support rail due tounsuitable tools.❑ Do not use pointed or sharp-edged tools.❑ Do not use a hammer.❑ Press the <strong>toothed</strong> <strong>belt</strong> pulley into the support rail until it isin contact <strong>with</strong> the snap ring at the back.❑ Fit the front snap ring.❑ Fit the protective caps.00015EF3Industrial Technologies32 MON 73 Schaeffler Group Industrial
Change language