Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Drive <strong>and</strong> return unitThe drive unit <strong>and</strong> return unit differ according to the design.However, both components are dismounted in the same way. Toothed <strong>belt</strong> pulley <strong>with</strong> bearing Snap rings Protective caps End coverFigure 11Overview of drive unitRemoving the drive unitor return unitPreparing for removalFigure 12Removing the end coverThe following tools are required:■ snap ring pliers■ removal tool.4✓ Toothed <strong>belt</strong> removed, see page 23.✓ In the case of the drive unit: motor, coupling <strong>and</strong> couplinghousing removed, see page 17 <strong>and</strong> page 16.❑ Remove the black end cover from the support rail.13200015EE500015EE8Industrial Technologies❑ Remove the round protective caps.Schaeffler Group Industrial MON 73 25
Change language