Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Removal <strong>and</strong> dismounting of componentsDetaching the second clampingdevice from the carriageNote!Removing the <strong>toothed</strong> <strong>belt</strong>Figure 10Removing the <strong>toothed</strong> <strong>belt</strong>❑ Detach the second clamping device from the carriage, but do notremove the clamping pieces from the <strong>toothed</strong> <strong>belt</strong>.The second clamping device must only be removed fromthe <strong>toothed</strong> <strong>belt</strong> if the clamping device itself or the <strong>toothed</strong> <strong>belt</strong>must be replaced. Dismounting of the second clamping device isnot necessary in order to remove the <strong>toothed</strong> <strong>belt</strong> unit.❑ Grip the <strong>toothed</strong> <strong>belt</strong> by the clamping device <strong>and</strong> pull it out ofthe support rail.00015EDEIndustrial Technologies24 MON 73 Schaeffler Group Industrial
Change language