Linear actuator with track roller guidance system and toothed belt ...

Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Fitting and mounting of accessoriesFor the linear actuator MLFI25-ZR, INA offers specially developedaccessories, see chapter Appendix, page 44.This chapter shows the fitting of the following accessories:■ coupling housing■ coupling.Coupling housingWarningFitting the coupling housingFigure 4Screw mounting of the couplingRemoving the coupling housingThe following tools are required:■ torque wrench■ Allen key or hex key inserts.Sudden start of the machine.Crushing of fingers between the linear actuator and machine parts.❑ Before starting work, disconnect the machine from the powersupply.❑ Secure the main switch of the machine against switching on.❑ Remove the black protective cap from the drive shaft,see Figure 11, page 25.❑ Slide the coupling housing over the drive shaft.The larger opening must face towards the adjacent construction.❑ Screw mount the coupling housing to the support rail usingfixing screws.– MLFI25-ZR: M5/5,5 Nm.✓ Coupling removed.❑ Loosen the fixing screws.❑ Remove the coupling housing in the direction of the drive shaft.00015EE6Industrial Technologies16 MON 73 Schaeffler Group Industrial