Linear actuator with track roller guidance system and toothed belt ...

More documents

Recommendations

Info

Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Fitting in the adjacent constructionThe linear actuator is fitted in two steps:■ the support rail is fixed to the adjacent construction■ the carriage is fixed to the adjacent construction.Location of the support railon the adjacent constructionNote!INA connecting bracketsThe support rail can be located on the adjacent construction usingthe following accessories:■ clamping lugs, see page 13■ fixing brackets, see page 13■ T-nuts to DIN 508, see page 14■ T-bolts to DIN 787, see page 14■ hexagonal nuts to DIN 934, see page 14.Under normal loads, location by means of clamping lugs,fixing brackets or T-nuts, T-bolts etc. is normally sufficient.Multi-axis handling systems comprising INA linear actuators can beconstructed using INA connecting brackets.Detailed information on the connecting brackets can befound in INA publication Fasteners and connecting brackets forlinear actuators (TPI 153).If linear actuators are located incorrectly, this can damage thelinear actuator itself and the adjacent construction.❑ Note the maximum tightening torques for the fixing screws,see page 45.❑ Note the maximum spacings for the fasteners.❑ Ensure that the adjacent construction has adequate strength.Industrial Technologies12 MON 73 Schaeffler Group Industrial
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Location of the support railusing clamping lugsor fixing brackets❑ If the support rail is fully in contact with the adjacentconstruction, clamping lugs or fixing brackets should be fittedon the left and right sides of the support rail at intervalsof max. 333 mm.A = 73 mmB = 88 mmFigure 2Location using clamping lugs00015EF7ABmax. 1,0 m❑ Under high loads, the support rail should be fixed at shorterintervals or additionally by means of T-nuts or other accessoriesnamed on page 12.Industrial TechnologiesSchaeffler Group Industrial MON 73 13
Page 2 and 3: Индастриал Техноло
Page 11: Индастриал Техноло
Page 46: Индастриал Техноло

Linear actuator with track roller guidance system and toothed belt ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?