Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
Linear actuator with track roller guidance system and toothed belt ...
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Индастриал Технолоджис www.ind-techno.com.ua +38 044 498 21 94Fitting in the adjacent constructionThe linear <strong>actuator</strong> is fitted in two steps:■ the support rail is fixed to the adjacent construction■ the carriage is fixed to the adjacent construction.Location of the support railon the adjacent constructionNote!INA connecting bracketsThe support rail can be located on the adjacent construction usingthe following accessories:■ clamping lugs, see page 13■ fixing brackets, see page 13■ T-nuts to DIN 508, see page 14■ T-bolts to DIN 787, see page 14■ hexagonal nuts to DIN 934, see page 14.Under normal loads, location by means of clamping lugs,fixing brackets or T-nuts, T-bolts etc. is normally sufficient.Multi-axis h<strong>and</strong>ling <strong>system</strong>s comprising INA linear <strong>actuator</strong>s can beconstructed using INA connecting brackets.Detailed information on the connecting brackets can befound in INA publication Fasteners <strong>and</strong> connecting brackets forlinear <strong>actuator</strong>s (TPI 153).If linear <strong>actuator</strong>s are located incorrectly, this can damage thelinear <strong>actuator</strong> itself <strong>and</strong> the adjacent construction.❑ Note the maximum tightening torques for the fixing screws,see page 45.❑ Note the maximum spacings for the fasteners.❑ Ensure that the adjacent construction has adequate strength.Industrial Technologies12 MON 73 Schaeffler Group Industrial
Change language