AUTOPSY SINKS, TABLES AND CARTS - Mopec
AUTOPSY SINKS, TABLES AND CARTS - Mopec
AUTOPSY SINKS, TABLES AND CARTS - Mopec
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CE Series L-Shaped Autopsy TablesCE600 w/Integral Right Wing or CE700 w/Integral Left Wing1234567891011The CE600 Autopsy Table Hand Spray has a high pressure hose coiled on a J-hook allowing completerinsing of the entire body or table. The unique L shape design allows organ removal and dissection.The CE Series L-shaped autopsy table is a pedestal designthat includes all of the convenient features necessary toperform an autopsy along with an added integrally constructedright or left wing. Unit includes <strong>Mopec</strong>’s standard downdraftventilation system. A hydro-aspirator is conveniently locatednear the sink basin for ease in collection and/or disposal of fluids.Waterproof electrical receptacles are provided on bothsides of the table. A hot and cold water faucet is provided witha single lever and a vacuum breaker to safeguard the facilitywater supply. The autopsy table has an integrally constructedlarge sink and is creased toward the center for completedrainage.The wing or end of the table is supported by a cabinetpedestal which contains a drawer and storage compartment.Fabricated of stainless steel with a #4 satin finish.WORKSURFACE HAS NO SEAMS OR OVERLAPS.UNIT IS SHIPPED IN ONE PIECE AS SHOWN.CE Series L-Shaped Standard FeaturesTable Top: The table top is fabricated of stainless steel with a #4satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are provided.Hydro-Aspirator: Located on the end of the table near the sinkbasin. The aspirator is provided with a reversing valve to clearthe aspirator of any foreign matter. The aspirator is completelyplumbed with control valve, vacuum breaker and tubing.Faucet: Swing spout faucet has a vacuum breaker controlled bya single lever hot/cold handle.Hand Spray: Hand Spray is fabricated of chrome plated brassand includes a high pressure hose.Grid Plates: Grid plates are recessed 1/2" and are supported bythe table edge without pins. Four independent grid plates are perforatedand removable.Wing: Wing is an integral part of the table completely welded,ground smooth and regrained to match the adjacent surface.Pedestal: Table pedestal is fabricated of 18 gauge stainless steeltype 304 with a #4 satin finish.CE Series L-Shaped Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker. Plumbedand wired, ready for use.CO009 Autopsy Table Perimeter Rinse Assembly: The perimeterrinse is designed with a 1/2" diameter perforated tube encompassingthe full inner perimeter of the pedestal style tables. Whilein use the perimeter rinse helps eliminate an accumulation ofdebris under the grid plates during an autopsy.CO012 Replaceable Ruler, Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.Product DescriptionProduct No: CE600 Right WingProduct No: CE700 Left WingISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.27221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com