AUTOPSY SINKS, TABLES AND CARTS - Mopec

CE500 (Non-Vented) Autopsy Table withLeg Frame1234567891011CE500 shown with scale stand (CO017) and autopsy scale (BB002)The CE500 Autopsy Table has an integrally constructed largenon vented sink with leg frame which is creased toward thedrain basin for complete and easy fluid drainage.This CE500 autopsy table is an economical autopsy table thatincludes all the convenient features necessary to efficientlyperform an autopsy. The CE500 has an open frame design.With this style, the downdraft cone is not utilized and isunavailable. Standard features include a hydro-aspirator, adeck mounted hand spray, a hot/cold water fixture, twowaterproof electrical receptacles, a deep sink and grid plates.The table frame is welded construction and fabricated of 1-5/8"(4 cm) stainless steel tubing with #4 satin finish.CE500 Standard FeaturesTable Top: The table top is fabricated of 14 gauge stainless steelwith a #4 satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are included.Hydro-Aspirator: Located on the end of the table near the sinkbasin. The aspirator has a reversing valve to clear the aspiratorof any foreign matter. The aspirator is designed to drain into thesink for collection or disposal of fluids and is completely plumbedwith control valve, vacuum breaker and tubing.Faucet: Swing spout faucet with vacuum breaker protection.Integral Sink: Construction eliminates sharp edges wherebacteria can accumulate. All welded seamless constructionprovides durability.Grid Plate: Grid plates are recessed 1/2" and are supported onthe table edge without pins. Four independent perforated gridplates are perforated and removable.Hand Spray: Deck mounted for convenient access. Chromeplated brass fixture with a flow control valve and a high pressurehose.Table Leg Frame: Welded construction and fabricated of 16gauge stainless steel tubing with #4 satin finish.CE500 Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.27021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com