AUTOPSY SINKS, TABLES AND CARTS - Mopec

CE310 Rotating and Elevating Autopsy Table1234567891011The CE310 autopsy table is a pedestal style table that incorporatesan elevating and rotating mechanism within thepedestal. A standard feature of the CE310 elevating table isMopec’s Downdraft Ventilation System, which helps ventilatethe body during an autopsy.A hydro-aspirator is conveniently located near the sink basinfor ease in collection and/or disposal of bodily fluids. Electricalreceptacles are provided on both sides of the table. A hot andcold water faucet is provided with a single lever control and avacuum breaker to safeguard the facility water supply. A deckmounted Hand Spray with a high pressure hose allows completerinsing of the body or table with the press of a singlelever. The autopsy table has an integrally constructed largesink and is creased toward the center for complete drainage. Astainless steel roller bearing carousel allows the table to lockat rotations of 0°, 90° and 180°.The elevating pedestal consists of an Electro-MechanicalActuator. The elevating pedestal is capable of lifting and lowering8" (from 32" - 40"). Maximum capacity is 750 pounds.CE310 Standard FeaturesTable Top: The table top is fabricated of 14 gauge stainless steelwith a #4 satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are positioned on each side of the pedestal.Integral Sink: Integral sink to front panel construction eliminatessharp edges where harmful bacteria can accumulate. All welded,seamless construction provides durability.Hand Spray: Deck mounted hand spray for convenience.Chrome plated brass with high pressure hose. Concealed shut offvalve located under table top.Hydro-Aspirator: Hydro-aspirator is located on the end of thetable near the sink. The aspirator has a reversing valve to clearthe aspirator of any foreign matter. The aspirator is designed todrain into the sink end for collection or disposal and is completelyplumbed with control valve, vacuum breaker and tubing.Faucet: Swing spout faucet with vacuum breaker protection.Pedestal Assembly: The pedestal consists of two mainassemblies: 1) Electro-Mechanical Actuator, 2) Exterior PedestalHousing. The elevating pedestal is capable of lifting and lowering8" via an electro mechanical actuator. The electro mechanicalactuator is capable of lifting a maximum capacity of 750 lbs.Table pedestal is fabricated of 11 gauge stainless steel with a #4satin finish.Grid Plates: Grid plates are recessed 1/2" and supported by thetable edge without pins. Four indepen dent grid plates are perforatedand removable.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE310 Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket located on the sink end of the autopsy table. Thestand includes a support tube allowing the scale to swing anddrain into the main sink.Meets ADA Requirement26221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com