AUTOPSY SINKS, TABLES AND CARTS - Mopec
AUTOPSY SINKS, TABLES AND CARTS - Mopec
AUTOPSY SINKS, TABLES AND CARTS - Mopec
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
C Series Wall Mounted Autopsy Sinks1234567891011CA100 Autopsy Sink Right shown with DC100 Autopsy CartQuick and Easy Clean UpSave time and space with our C-Series Wall Mounted AutopsyDissection Sinks. The body is transported on a moveable cartthat adjoins a right sink approach (CA100 model), left sinkapproach (CB100 model) or center sink approach (CC100model) for easy access. No additional lifting of the body isrequired. The cart trays overhang the sink to allow for properfluid drainage. Optional leg frame (CO006) is also available.PLEASE NOTE: Quantity of standard features may vary basedupon model that is ordered. Example - instrument rinse tray onCA100 and CB100 is one while on the CC100 model there isnone due to space constraints. Please check with a <strong>Mopec</strong>Representative for more information when ordering.C Series Standard FeaturesInstrument Rinse Tray: A built in instrument rinse tray is includedon the right (CA100) and left (CB100) approach models only andis ideal for rinsing and draining organs and instruments.(CC100models none due to space constraints.)Large Instrument Drawers: Flush to the table when closed andfitted with flush inset handles at the top to keep fluid from accumulatingin the drawers. (CA and CB models include one drawer,CC model includes two drawers).Hydro-Aspirator: The cold water only hydro-aspirator isdesigned to aspirate fluids from the body. Complete with on/offcontrol valve, reverse flow feature, ample supply flexible tubingand hose hanger.Hand Spray Assembly: Heavy duty chrome plated brass handpiece with easy push trigger. This includes 96" of high pressurehose. CA and CB models have one sprayer. CC includes twosprayers.CB100 Autopsy Sink Left shown with DB100 Autopsy CartVacuum Breakers: Built into the plumbing fixtures instead ofmounted on the top shelf, leaving more usable work space andallowing for quick and easy cleaning.Integral Sink: Integral sink construction eliminating any overlappingedges for a sanitary application.Water Fixtures: Hot and cold water fixtures have wrist bladehandles and goose neck spouts. Vacuum breaker protected.Removable Grid Plates: Constructed to fit easily into the sinkledge without mounting pins. Grid plates are interchangeable,with 3/8" diameter perforations on 2" centers.Body Rinse Fixture: Consists of cold water valve, serrated hosefitting, clear tubing and hose hanger. Vacuum breaker protected.Electrical: GFCI duplex electrical receptacle with water resistantcover. CA and CB models have one receptacle, CC modelincludes two receptacles.All <strong>Mopec</strong> Autopsy Sinks are delivered21821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
C Series Wall Mounted Autopsy SinksCC100 Autopsy Sink Center approach shown with DA100 Autopsy CartISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.The C Series Wall Mounted Autopsy Sinks can be built to yourrequirements with the optional features listed below.If you require a specific feature, please contact <strong>Mopec</strong>Customer Service for assistance.C Series Optional FeaturesCO001 Autopsy Sink Leg Frame: For CA100 and CB100.CO002 Autopsy Sink Leg Frame: For CC100.CO003 Sink Perimeter Rinse Assembly: Provides a full perimeterrinse on all four sides of the sink where the autopsy cartdrains. Includes cold-water on/off water control valve, serratedhose fitting and perforated formed stainless steel rinse tube.Easily removable for cleaning.CO004 Gas Valve Splash Mount: Laboratory gas fitting with 1/4turn on/off valve and serrated hose fitting.CO005 Air Valve Splash Mount: Laboratory air fitting with 1/4turn on/off valve and serrated hose fitting.CO006 Safety Eye Wash Splash Mount: Splash mounted safetyeyewash with gentle eye spray head, self coiling retractable hoseand handpiece hanger.CO007 Exhaust Duct: Ventilation exhaust ducting located overthe dissection area of the CA100, CB100 and CC100 autopsytables. The 8" x 14" ventilation grill is routed through the backsplash of the sink and is designed to remove pungent odors.Optional organ rinse basket shown with C Series Autopsy SinkCO008 Fluorescent Light Assembly: Dual four foot long highoutput fluorescent light fixtures encased in a watertight plasticcase. Provided with watertight on/off switch.CO012 Replaceable Ruler, Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO016 Scale Stand Wall Mounted: Wall-mounted scale supportsocket located on the shelf of the autopsy sink. The standincludes a support tube allowing the scale to swing over anddrain into the main sink. Scale not included.CO020 Organ Rinse Basket: Designed to hang on the hot andcold water fixture, the organ instrument rinse tray is made ofstainless steel with a perforated bottom.CO022 Evidence Screen: Prevent accidentally washingevidence down the drain. Made of stainless steel with a pullhandle, this screen can be used on any of the C Series units.BL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.Product DescriptionProduct No. CA100 — Right Approach SinkProduct No. CB100 — Left Approach SinkProduct No. CC100 — Center Approach SinkProduct No. CC300 — Dual ApproachCA100 Autopsy Sink shown with DA100 Autopsy Cart123456789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com219
CA100 Wall Mounted Autopsy SinkRight Hand Sink12345678910112AST<strong>AND</strong>ARD FEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (2)D GFCI Electrical OutletE Hydro AspiratorF Fixture w/Swing SpoutG Body RinseH Hand SprayK I Large Instrument DrawerJ Instrument Rinse TrayK Main Circuit Breaker SwitchOPTIONAL FEATURESCO001 Autopsy Sink Leg FrameCO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 BL800 1 HP Disposal28.00 in71.1 cm40.00 in101.6 cmThe CA100 wall mounted right hand approach autopsy sinkprovides all of the features normally found in a typical pedestaltype autopsy table without the space requirements. The wallmounted style eliminates the physical strain of moving thebody since the autopsy is performed directly on the autopsycart. Wall mounted design allows for easy floor cleaning.884.00 in213.4 cmFINISHED FLOORBCIHDGUL 61010:2004CAN/CSA-C22.2NFPA 79-200234.00 in86.4 cmAFKAutopsy cart overhangs the station allowing fluids to draindirectly into the sink. Adjacent to the sink is the ample dissectionarea with removable grid plates. Dissection area gridplates are elevated above a sloped surface and drain directlyinto the sink.JEFINISHEDWALLFINISHED FLOOR61.00 in154.9 cm21.00 in53.3 cm22021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CB100 Wall Mounted Autopsy SinkLeft Hand SinkST<strong>AND</strong>ARD FEATURESA A Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (2)D GFCI Electrical OutletE Hydro AspiratorF Fixture w/Swing SpoutG Body RinseH Hand SprayI Large Instrument DrawerJ Instrument Rinse TrayK K Main Circuit Breaker SwitchBEFG12OPTIONAL FEATURESCO001 Autopsy Sink Leg FrameCO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 BL800 1 HP DisposalJKKA3484.008in213.4 cmDCIH528.00 in71.1 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-2002FINISHEDWALL67840.00 in101.6 cm61.00 in154.9 cm9FINISHED FLOORThe CB100 wall mounted left hand approach autopsy sink orwall mounted elevating autopsy sink provides all of the featuresnormally found in a typical pedestal type autopsy tablewithout the space requirements. The wall mounted style eliminatesthe physical strain of moving the body since the autopsyis performed directly on the autopsy cart.34.00 in86.4 cmFINISHED FLOOR21.00 in53.3 cmOpposite the sink is an ample autopsy dissection area, withremovable grid plate. The dissection area grid plate is mountedabove a sloped surface, which drain directly into the sink.Wall mounted design allows for easy floor cleaning.101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com221
CC100 Wall Mounted Autopsy SinkCenter Sink1234567891011<strong>Mopec</strong> Can CustomizeYour Equipment -Let the <strong>Mopec</strong>Solution Work forYou!22221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CC100 Wall Mounted Autopsy SinkCenter SinkAST<strong>AND</strong>ARD A FEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (4)D GFCI Electrical Outlet (2)E Hydro AspiratorF Fixture w/Swing Spout (2)G Body Rinse (2)H Hand Spray (2)I Large Instrument Drawer (2)J Main Circuit Breaker SwitchBEGF12OPTIONAL FEATURESCO002 Autopsy Sink Leg Frame (CC100 Only)CO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 1 HP DisposalCHIDAJ34114.00 in290 cm15UL 61010:20046CAN/CSA-C22.2NFPA 79-20027FINISHEDWALL840.00 in101.6 cm61.00 in155 cm9FINISHED FLOORThe CC100 wall mounted center approach autopsy sink providesall of the features normally found in a typical pedestaltype autopsy table without the space requirements. The autopsycart overhangs the autopsy station allowing fluids to draindirectly into the sink. On each side of the sink are dissectionareas of equal size with removable and interchangeable gridplates.34.00 in86 cmFINISHED FLOOR21.00 in53.3 cmThe dissection area includes grid plates which are elevatedabove a sloped surface that drain directly into the sink. Wallmounted design allows for easy floor cleaning.101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com223
CC300 Dual Approach Wall MountedAutopsy Sink1234567891011The CC300 dual approach wall mounted center approachautopsy sink provides all of the features normally found in atypical pedestal type autopsy table without the space requirements.The autopsy carts overhang the autopsy station allowingfluids to drain directly into the sink. On each side of thesink are dissection areas of equal size with removable andinterchangeable grid plates. The dissection area includes gridplates which are elevated above a sloped surface that draindirectly into the sink. Wall mounted design allows for easy floorcleaning.The CC300 WasDesigned by aMedical Examiner forEveryday Use andTough Forensic CasesCC300 Features• Accommodating the worst case scenario in a functional andeconomical solution• Space to perform two autopsies• Space for forensic cases and laying out of specimens forinvestigations• Simplifying installation - the CC300 arrives completely prewired22421750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CC300 Dual Approach Wall MountedAutopsy SinkST<strong>AND</strong>ARD FEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (3)D GFCI Electrical Outlet (2)E Hydro Aspirator (2)F Fixture w/Swing Spout (2)G Hand Spray (2)H Main Circuit Breaker SwitchI Integral Sink (91.50” X 20” X 6”)BFE12OPTIONAL FEATURESCO002 Autopsy Sink Leg FrameCO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 1 HP DisposalDICHGA345150.00 in381 cm628.00 in71 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-200278FINISHEDWALL940.00 in101.6 cm61.00 in155 cm10FINISHED FLOOR34.00 in86 cmFINISHED FLOOR21.00 in53.3 cm1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com225
C SeriesElevatingElevating Wall Mounted Autopsy SinksPatent Pending1234567891011PROBLEM<strong>Mopec</strong> has extended their current extensive Autopsy Table linewith the newest addition - The “Elevating” Wall MountedStation. Available in your choice of a left hand sink, a righthand sink or a center approach sink. The most technologicallyadvanced Autopsy Workstation available today. <strong>Mopec</strong> hasdesigned within this station the latest advanced safetymeasures of Wall Mounted Autopsy Stations along with theergonomic comfort an Autopsy Laboratory deserves.Various heights of Pathologist Staff including AutopsyTechnicians, Forensic Investigators and Pathologists range inheight from 5’4" to 6’6" (162.5 cm to 198.1 cm). On a restrictivebudget, your facility cannot afford to purchase each technicianbased on their height. Your lab must meet the ergonomicchallenges for a safe and effective workplace. What do you do?THE MOPEC SOLUTIONLet <strong>Mopec</strong> Design your laboratory with an Elevating Wall MountedAutopsy Station. The Wall Mounted Autopsy Station elevates toaccommodate the shortest to the tallest Autopsy Technician,forensic Investigator or Pathologist. Used in conjunction with theDC Series Autopsy Carts, this station will also help address thespecial considerations deemed necessary during those SpecialAutopsy Cases where the body needs to be lowered and/orraised. Why purchase specialized equipment for the variousheights of personnel when one table can solve the problem.Various Sized Personnel?Not a Problem!22621750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
ElevatingC Series Elevating Wall Mounted Autopsy SinksPatent Pending12345Modified CB200 left approach sink shown with optional exhaust and DA100 autopsy cart6A <strong>Mopec</strong> Exclusive!The C-Series Wall Mounted Elevating Autopsy sink wasdesigned to provide an adjustable working area ergonomicallycorrect for users of various heights. A 5' 4'' technician is just ascomfortable using this autopsy sink as a 6' 4" technician. Thesink can be surface mounted or recessed within the thicknessof the wall. Adjustability of the C Series allows all technicianswhether sitting or standing, to make adjustments to bring thework to their exact desired position and comfort, regardless ofheight with the flip of a switch. The users have the ability toraise and lower the unit approximately 8''. Patent pending.NOTE: Quantity of standard features may vary based uponmodel that is ordered. Example, CA200, CB200 units includeone each instruments rinse tray, while CC200 model has noinstrument rinse tray due to space constraints. Please contacta <strong>Mopec</strong> representative for more information when ordering.Product DescriptionProduct No. CA200 — Elevating Right Approach SinkProduct No. CB200 — Elevating Left Approach SinkProduct No. CC200 — Elevating Center Approach SinkC Series Standard FeaturesInstrument Rinse Tray: A built in instrument rinse tray is includedon the right (CA200) and left (CB200) approach models only andis ideal for rinsing and draining organs and instruments. (CC200models none due to space constraints.)Large Instrument Drawers: Flush to the table when closed andfitted with flush inset handles at the top to keep fluid from accumulatingin the drawers. (CA and CB models include with onedrawer standard, CC model includes two drawers standard).Hydro-Aspirator: The cold water only hydro-aspirator isdesigned to aspirate fluids from the body. Complete with on/offcontrol valve, reverse flow feature, ample supply flexible tubingand hose hanger.789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com227
C Series ElevatingElevatingWall Mounted Autopsy SinksPatent Pending1234567891011C Series Standard FeaturesHand Spray Assembly: Heavy duty chrome plated brass handpiece with easy push trigger. Includes 96" of high pressure hose.CA and CB models have one sprayer. CC model has twosprayers.Vacuum Breakers: Built into the plumbing fixtures instead ofmounted on the top shelf, leaving more usable work space andallowing for quick and easy cleaning.Integral Sink: Integral sink construction eliminating any overlappingedges for a sanitary application.Water Fixtures: Hot and cold water fixtures have wrist bladehandles and goose neck spouts. Vacuum breaker protected.Removable Grid Plates: Constructed to fit easily into the sinkledge without mounting pins. Grid plates are interchangeable.Body Rinse Fixture: Consists of cold water valve, serrated hosefitting, clear tubing and hose hanger. Vacuum breaker protected.Electrical: GFCI duplex electrical receptacle, water resistantcover. CA and CB models include one receptacle, CC model hastwo receptacles.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.The C Series Elevating Wall Mounted Autopsy Sinks can bebuilt with optional features listed below. Contact <strong>Mopec</strong> forcustom designs to meet your facility’s requirements.Modified CB200 shown with custom stainless steel work surface and wall cabinetsC Series Optional FeaturesCO003 Sink Perimeter Rinse Assembly: Provides a full perimeterrinse on all four sides of the sink where the autopsy cartdrains. Includes cold-water on/off water control valve, serratedhose fitting and perforated formed stainless steel tubing. Easilyremovable.CO004 Gas Valve Splash Mount: Laboratory gas fitting with 1/4turn on/off valve and serrated hose fitting. Splash mounted.CO005 Air Valve Splash Mount: Laboratory air fitting with 1/4turn on/off valve and serrated hose fitting. Splash mounted.CO006 Safety Eye Wash Splash Mount: Splash mounted safetyeyewash with gentle eye spray head, self coiling retractable hoseand handpiece hanger.CO007 Exhaust Duct: Ventilation exhaust ducting located overthe dissection area of the table. The 8" x 14" (20.3 cm x 35.5 cm)ventilation grill (which is included when ordering CO007) isrouted through the back splash of the sink and is designed toremove pungent odors. Two required for CC200.CO008 Fluorescent Light Assembly: Dual four foot long highoutput fluorescent light fixtures encased in a watertight plasticcase. Provided with watertight on/off switch.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replaced.CO016 Scale Stand Wall Mounted: Wall-mounted scale supportsocket is located on the shelf of the autopsy sink. The standincludes a support tube allowing the scale to swing over anddrain into the main sink. Scale not included.CO020 Organ Rinse Basket: Designed to hang on the hot andcold water fixture, the organ instrument rinse tray is made ofstainless steel with a perforated bottom.CO022 Evidence Screen: Prevents accidentally washing evidencedown the drain. Made of stainless steel with a pull handle.BL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.Optional Wall mounted Scale StandWall mounted elevating sink allows for easy floor cleaning22821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CA200 Wall MountedElevatingElevating Autopsy SinkRight Hand SinkPatent PendingST<strong>AND</strong>ARDAFEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (2)D GFCI Electrical OutletE Hydro AspiratorF Fixture w/Swing SpoutG Body RinseH Hand SprayI Large Instrument DrawerJ InstrumentKRinse TrayK Elevation SwitchL Main Circuit Breaker SwitchGFE12OPTIONAL FEATURESCO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 1 HP DisposalCHIKDALJ34992.25 in234.3 cm531.50 in80.0 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-2002FINISHEDWALL67840.00 in101.6 cm13.00 in33.0 cm(34.00 - 42.00) in(86.4 - 106.7) cm76.50 in194.3 cm15.00 in38.1 cm910FINISHED FLOORFINISHED FLOORThe CA200 elevating wall mounted right hand approach autopsysink provides all of the features normally found in a typicalpedestal type autopsy table without the space requirements.The wall mounted style eliminates the physical strain of movingthe body since the autopsy is performed directly on theautopsy cart. Wall mounted design allows for easy floor cleaning.Autopsy cart overhangs the station allowing fluids to draindirectly into the sink. Adjacent to the sink is the ample dissectionarea with removable grid plates. Dissection area gridplates are elevated above a sloped surface and drain directlyinto the sink.1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com229
CB200 Wall Mounted ElevatingElevatingAutopsy SinkLeft Hand SinkPatent Pending1234567891011ST<strong>AND</strong>ARD FEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (2)D GFCI Electrical OutletE Hydro AspiratorF Fixture w/Swing SpoutG Body RinseH Hand SprayI Large Instrument DrawerJ Instrument Rinse TrayK Elevation SwitchL Main Circuit Breaker SwitchOPTIONAL FEATURESCO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 1 HP Disposal40.00 in101.6 cm31.50 in80.0 cm13.00 in33.0 cm92.259in234.3 cmBKLAFINISHED FLOORThe CB200 elevating wall mounted left hand approach autopsysink or wall mounted elevating autopsy sink provides all ofthe features normally found in a typical pedestal type autopsytable without the space requirements. The wall mounted styleeliminates the physical strain of moving the body since theautopsy is performed directly on the autopsy cart.EDFJCG(34.00 - 42.00) in(86.4 - 106.7) cmHIUL 61010:2004CAN/CSA-C22.2NFPA 79-2002FINISHED FLOORFINISHEDWALL76.50 in194.3 cm15.00 in38.1 cmOpposite the sink is an ample autopsy dissection area, withremovable grid plate. The dissection area grid plate is mountedabove a sloped surface, which drain directly into the sink.Wall mounted design allows for easy floor cleaning.23021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CC200 Wall Mounted ElevatingElevatingAutopsy SinkACenter SinkPatent PendingAST<strong>AND</strong>ARD FEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (4)D GFCI Electrical Outlet (2)E Hydro AspiratorF Fixture w/Swing Spout (2)G Body Rinse (2)H Hand Spray (2)I Large Instrument Drawer (2)J Elevation SwitchK Main Circuit Breaker SwitchBBEGF12OPTIONAL FEATURESCO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 1 HP DisposalCHIDAJK3431.50 in80.0 cm31.50 in80.0 cm122.25 in310.5 cm122.25 in310.5 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-2002567FINISHEDWALL840.00 in101.6 cm13.00 in33.0 cm(34.00 - 42.00) in(86.4 - 106.7) cm76.50 in194.3 cm15.00 in38.1 cm910FINISHED FLOORThe CC200 elevating wall mounted center approach autopsysink provides all of the features normally found in a typicalpedestal type autopsy table without the space requirements.The autopsy cart overhangs the autopsy station allowing fluidsto drain directly into the sink. On each side of the sink areFINISHED FLOORdissection areas of equal size with removable andinterchangeable grid plates.The dissection area includes grid plates which are elevatedabove a sloped surface that drains directly into the sink. Wallmounted design allows for easy floor cleaning.1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com231
DA Series Autopsy Carts1234567891011DA100 (consists of chassis, DA000, and autopsy top, GA100The DA Series autopsy carts are used in conjunction with<strong>Mopec</strong>’s wall mounted autopsy sinks. The frame is rigid with abuilt in slope allowing for fluid drainage into the autopsy sink.The downward sloped edge of the cart frame will latch ontothe C Series sink if needed.The DA Series feature heavy-duty 8" diameter non-corrosivepowder coated wheels. During transport, one caster is swivellocked for easy mobility. When inactive, the casters can belocked in place.DA Series Standard FeaturesCart Top: Fabricated of 14 gauge stainless steel with #4 satinfinish. The top is recessed and dimpled toward the drain hole. Adrain plug on a chain is provided. All exposed welds are groundsmooth and grained to match a #4 satin finish. <strong>Mopec</strong> providesmultiple style cart tops that will fit the DA Series Autopsy Carts.Cart Frame/Welding: Fabricated of 1-1/2" (3.8 cm) heavy gaugestainless steel tubing. All welding is TIG type utilizing only stainlesssteel as a filler media. All welding is continuous with anapproximate 1/8" (.38 cm) radius bead and are clean and free ofburrs and discoloration. Weld fillets are approximately 1/8"(.64 cm) in diameter.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.DA000 Chassis onlyDA Series Autopsy CartsDescriptionProduct No.Autopsy Cart Chassis OnlyDA000Autopsy Cart Chassis and GA100 TopDA100Autopsy Cart Chassis and GA300 TopDA300Autopsy Cart Chassis and GA600 Top - Fiberglass DA600Autopsy Cart Chassis and GA800 Top - X-Ray Plastic DA800Autopsy Cart Chassis and GA850 Top - X-Ray Plastic DA85023221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DA Series Autopsy Carts34.10 in86.6 cm80.50 in204.5 cmST<strong>AND</strong>ARD FEATURES:A Drain with rubber plugB Heavy-duty cart frameC Heavy duty eight inch casters32.00 in81.3 cm35.78 in90.9 cmABC25.75 in65.4 cm123456789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com233
DB Series Autopsy Carts - Elevating12345DB000 and autopsy top, GA10067891011DB000 and autopsy top, GA600The DB Series elevating (hand crank) autopsy carts can beused in conjunction with any of <strong>Mopec</strong>’s C Series WallMounted Autopsy Sinks. The frame design features a handlifting mechanism that elevates one end of the autopsy cartallowing for a sloped surface. The downward sloped edge ofthe cart frame will latch onto the C Series sink if needed.Standard features include an elevating mechanism consistingof two hydraulic cylinders actuated by a hand crank assemblywith 7-1/2" (19 cm) of travel.The DB Series feature heavy-duty 8" diameter non-corrosivepowder coated wheels. During transport, one caster is swivellocked for easy mobility. When inactive, the casters can belocked in place. Weight capacity is 375 pounds.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.DB000 Autopsy CartDB Series Standard FeaturesElevating Mechanism: Hand cranked mechanical/ hydraulic liftsystem with 7-1/2" of lift adjustment.Cart Frame: 1-1/2" (3.8 cm) heavy gauge stainless steel tubing.TIG type welding is continuous with an approximate 1/8 inch(31 cm) radius bead. Weld fillets are brushed clean removing anyburrs or discoloration.DB Series Autopsy CartsDescriptionAutopsy Cart Hand Crank Chassis OnlyAutopsy Cart Hand Crank Chassis and GA100 TopAutopsy Cart Hand Crank Chassis and GA300 TopAutopsy Cart Hand Crank Chassis and GA600 TopAutopsy Cart Hand Crank Chassis and GA800 TopAutopsy Cart Hand Crank Chassis and GA850 TopProduct No.DB000DB100DB300DB600DB800DB85023421750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DB Series Autopsy Carts - ElevatingA132.00 in81.3 cm35.37 in89.8 cmBD80.50 in204.5 cmCST<strong>AND</strong>ARD FEATURES:A Drain with rubber plugB Elevating handleC Heavy-duty cart frameD Heavy duty eight inch casters23.79 in60.4 cm36.92 in93.8 cm25.75 in65.4 cm23456789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com235
DC Series Autopsy Carts12345678The DC Autopsy Cart elevates andtilts at both ends offering a variety9The DC Series tilting/elevating autopsy carts are used in conjunctionwith the wall mounted autopsy sinks or as a simpleviewing stretcher. The autopsy cart incorporates hydraulic liftingcylinders allowing for either end to be elevated and/or tilted.Dual side mounted foot controls allow for simpleelevating/tilting from either side.Fully raisedTilt either end1011The DC Series uses a Stryker base which has an elevatingheight of 14”. Dual-locking levers, locks all wheels simultaneouslyfrom either end. Chassis is constructed of high impactPVC with twin pedestal hydraulics. Dual end wheel brake activatorbuilt in. A variety of interchangeable, removable tops areavailable.No need for cart latch, simply use dual locking feature to keepcart in a fixed position.DC Series Autopsy CartsDescriptionAutopsy Cart Hydraulic Chassis OnlyAutopsy Cart Hydraulic Chassis and GA100 TopAutopsy Cart Hydraulic Chassis and GA300 TopAutopsy Cart Hydraulic Chassis and GA600 TopAutopsy Cart Hydraulic Chassis and GA800 TopProduct No.DC000DC100DC300DC600DC800ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.Autopsy Cart Hydraulic Chassis and GA850 TopDC85023621750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DC Series Autopsy CartsDC100 Shown12A3BCD4532.00 in81.3 cm6780.50 in204.5 cmFully lowered8931.58 in80.2 cm10ST<strong>AND</strong>ARD FEATURES:A Hydraulic ChassisB Brake ControlC Elevation Control PedalsD Casters with Locking Mechanism and 5th Wheel Steering1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com237
DC400 Bariatric Autopsy Cart123456789The DC400 Bariatric Autopsy Cart can be used in conjunctionwith wall mounted autopsy sinks or as a simple viewingstretcher. Designed with heavy gauge wall tubing and a reinforcedframe with an inset oversized top. Maximum capacity1000 pounds.The top is not removable and includes a drain built in the carttop. The cart top measures 80-1/2" x 40" (204.4 cm x 101.6cm) with a 1-1/2" profile and a slope of 2 inches.The DC400 Bariatric Cart features heavy-duty 8" diameternon-corrosive powder coated wheels. During transport, onecaster is swivel locked for easy mobility. When inactive, thecasters can be locked in place.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.10DC400 Standard FeaturesCart Top: Fabricated of 14 gauge stainless steel with a #4 satinfinish. The top is permanently welded to the frame of thechassis.The top is also provided with a frame around theperimeter yielding additional support.11Cart Frame: Fabricated of 1-1/2" extra heavy gauge stainlesssteel tubing. The frame is provided with additional cross tubingsupport.Gussets: Angle support gussets provided on each corner forextra strength.Welding: All welding is TIG type utilizing only stainless steel as afiller media. All weld fillets are approximately 1/4" diameter. Allwelds are brushed clean removing any burns or discolorationDC400 shown with custom wall mounted autopsy sinkDC400 Optional FeaturesDescriptionFalse frame for DC400 includes cover (white)Product No.DC41023821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DC400 Bariatric Autopsy Cart132.00in81.3 cm14.00in35.6 cmABCE80.50 in204.5 cmD40.00in101.6 cm2345678934.25in87.0 cmST<strong>AND</strong>ARD FEATURES:A Drain with Rubber PlugB Extra Large Top (Non Removable)C Heavy-Duty Cart Frame, 1000# CapacityD Caster with Total Lock SystemE Support Gussets!35.85in91.1 cm26.73in67.9 cm101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com239
DC500 Tilting Bariatric Autopsy CartHand Crank12345678910The DC500 is designed to be used in conjunction with wallmounted autopsy sinks or as a simple viewing stretcher, thishigh load-bearing table has a manual hand-crank hydraulic liftingsystem with dual cylinders. One end of the table can beelevated 6" for better drainage into the autopsy sink.Standard features include an elevating mechanism consistingof two hydraulic cylinders actuated by a hand crank assemblywith 6" (15.24 cm) of travel.With a maximum weight capacity of 1,000 lbs, this table isconstructed using heavy gauge wall tubing and features a reinforcedframe and an inset, non-removable oversized top. Thetop measures 80-1/2" x 40" (204.4 cm x 101.6 cm) with acrease to drain and a 1-1/2" profile.DC500 Standard FeaturesElevating Mechanism: Hand cranked mechanical/hydraulic liftsystem with 6" of lift adjustment.Cart top: Fabricated of 14 gauge stainless steel with a #4 satinfinish. The top is permanently fixed to the frame of the chassis.Cart Frame/Welding: Fabricated of 1-1/2" extra heavy gaugestainless steel tubing. All welding is TIG type utilizing only stainlesssteel as a filler media. All fillet welds are approximately 1/4"wide and all exposed welds are ground smooth and grained tomatch the table’s #4 satin finish. Frame includes cross tubingsupport, while the top also has a frame around its perimeter foradditional support.Gussets: Angle support gussets provided on each corner forextra strength.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.11DC500 Optional FeaturesDescriptionFalse frame for DC500 includes cover (white)Product No.DC410Tilting autopsy cart uses a simple hand crank, elevates up to six inches24021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DC500 Tilting Bariatric Autopsy CartHand Crank1EABCGD234532.00 in81.3 cm40.00 in101.6 cm614.00 in35.6 cm780.50 in204.5 cm835.73 in90.8 cm23.91 in60.7 cmST<strong>AND</strong>ARD FEATURES:A Drain with rubber plugB Extra large top (Non Removable)C Heavy-duty cart frame, 1000 lb. capacityD One directional caster and three braking castersE Folding hand-crank operationF Lift on one table end (6" raise)G Support gussetsF25.75 in65.4 cm9101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com241
DD Series Autopsy Carts1234567891011DD000 shown with modified JC100 body trayFitted to saddle the JC Series Body Tray within the frame, theDD Series is designed with a built in slope. <strong>Mopec</strong> offers twodifferent sizes of body trays that are removable and easilytransported with a motorized or manual fork type lift. <strong>Mopec</strong>carts feature 8" heavy-duty wheels.DD Series Standard FeaturesCart Saddle: Fabricated of 14 gauge stainless steel with #4 satinfinish. The saddle is completely welded with no overlappingseams or gaps. All exposed welds are ground smooth andgrained to match a #4 satin finish.Cart Frame Material: 1-1/2" (3.8 cm) 16 gauge stainless steeltubing. All welding is continuous with an approximate 1/8" (.31cm) radius bead.Welding: All welding is TIG type utilizing only stainless steel as afiller media. All weld fillets are approximately 1/4" (.64 cm)diameter and are brushed clean removing any weld burrs anddiscolorationWheels/Casters: Heavy-duty 8" diameter non-corrosive powdercoated wheel. During transport, one caster is swivel locked foreasy mobility. When inactive, the caster can be locked in place.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.DD Series Autopsy CartsDescriptionProduct No.Autopsy Cart, Saddle Style (Chassis Only) for 23" Body Tray DD000Autopsy Cart, Saddle Style and 23" JC100 Body Tray DD100Autopsy Cart, Saddle Style (Chassis Only) for 27" Body Tray DD050Autopsy Cart, Saddle Style and 27" JC101 Body Tray DD200DD050 shown with modified JC101 body tray24221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DD Series Autopsy CartsDD000 Autopsy Cart Tray, Saddle Chassis Only32.34 in82.1 cmBACD77.15 in196.0 cm22.88 in58.1 cm33.49 in85.1 cmST<strong>AND</strong>ARD FEATURES:A Cut-out for Tray Drain HoleB Body Tray SaddleC Heavy-Duty Cart FrameD Caster with Total Lock System25.75 in65.4 cm123456789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com243
DE Series Autopsy Carts12345DE100 roller style autopsy cart67891011Modified DE000 chassis shown with GA100 cart topThe DE Series Roller Style autopsy cart can be used inconjunction with any of <strong>Mopec</strong>’s wall mounted sinks and isdesigned to accept the JC100, JC101 or JC200 Body Trays.Gliding on corrosion proof nylon rollers, the body tray easilyrolls onto the cart frame. The DE000 is also designed with abuilt in slope. <strong>Mopec</strong> carts feature 8" diameter heavy dutynon-corrosive powder coated locking wheels.DE Series Standard FeaturesCart Frame Material: 1-1/2" (3.8 cm) heavy gauge stainlesssteel tubing. All welding is continuous with an approximate 1/8"(.31 cm) radius bead.Tray Roller Wheels: 2" diameter polypropylene roller wheelassembly. Each wheel assembly includes oilite bushings andwashers providing an almost effortless motion of loading andunloading of the tray.Welding: All welding is TIG type utilizing only stainless steel as afiller media. All weld fillets are approximately 1/4" diameter andare brushed clean removing any burrs or discoloration.Modified DE000 chassisISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.DE Series Autopsy CartsDescriptionProduct No.Autopsy Cart Roller Type (Chassis Only) for 23" Tray DE000Autopsy Cart Roller Type w/JC100 Body Tray 23" DE100Autopsy Cart Roller Tray w/JC200 Body Tray 23" DE300Autopsy Cart Roller Type (Chassis Only) for 27" Tray DE050Autopsy Cart Roller Type w/JC101 Body Tray 27" DE20024421750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DE Series Autopsy CartsDE050 Autopsy Cart Roller Type, Saddle Chassis Only12A3BCD4527.25 in69.2 cm679.67 in202.4 cm7834.12 in86.6 cm22.88 in58.1 cm10.95 in27.8 cmST<strong>AND</strong>ARD FEATURES:A Roller Wheel AssemblyB Tray LatchC Heavy-Duty FrameD Caster with Total Lock System!35.12 in89.1 cm25.76 in65.4 cm27.44 in69.7 cm9.45 in24.0 cm9101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com245
DF100 Autopsy Cart with Grid Plates1234567891011DF100 Autopsy Cart TopThe DF100 autopsy cart can be used in conjunction with anyof <strong>Mopec</strong>’s wall mounted autopsy sinks, the top is designedwith a built in slope. The cart top is removable and easilytransported with either a motorized or manual fork type lift.Specially designed grid plates, designed for flush fit with cartedge, lock into place allowing the body to be level with theleading edge of the top. This style grid plate eliminates thestrenuous task of lifting a body over an edge of the tray. Fourindependent grid plates are perforated and removable.All <strong>Mopec</strong> carts feature Total Lock caster system with non corrosive,8" heavy-duty wheels. Caster wheel center is fabricatedusing state-of-the-art powder coated plastic with polyurethanetreads for years of lasting service. Locking and braking areaccomplished through effortless pedal motion. During autopsy,swivel and brakes on all casters are locked simultaneouslyfrom one position. During transport, one caster swivel is lockedfor easy mobility.DF100 Standard FeaturesFrame: Material on the cart frame is 1-1/2" heavy gauge wallstainless steel tubing. All welding is continuous with an approximate1/8" radius bead.DF100 Autopsy CartWelding: All welding is TIG type utilizing only stainless steel as afiller media. All welds are clean and free of burrs and discoloration.Grid Plates: Grid plates designed for flush fit with cart edge. Fourindependent grid plates are perforated and removable.Wheels/Casters: Heavy-duty 8" diameter non-corrosive powdercoated wheel. During transport, one caster is swivel locked foreasy mobility. When inactive, the caster can be locked in place.Cart Top: Top fabricated of 14 gauge stainless steel with #4 satinfinish. The top measures 32" W x 81" L x 1-3/4" profile with a 2"ledge around the full perimeter. The top is recessed 2" deep andprovided with heavy drain creases toward the dimpled drain hole.The drain plug is provided with a stainless steel chain permanentlyaffixed to the top flange. All exposed welds are ground smoothand grained to match the #4 satin finish.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.24621750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
DF100 Autopsy Cart with Grid Plates35.77 in90.9 cm81.00 in206.0 cmST<strong>AND</strong>ARD FEATURES:A Drain with Rubber PlugB Perforated Grid PlatesC Autopsy Cart TopD Heavy-Duty FrameE Caster with Total Lock System!32.00 in81.3 cm34.20 in86.9 cmBACDE25.75 in65.4 cm123456789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com247
CF Series Embalming Workstations1234567891011CF200 Embalming Sink shown with CF400 Embalming CartThe CF Embalming SinkThe Embalming Sink incorporates all the necessary featuresfor full body embalming. The sink includes a hot and coldwater fixture with a hydro-aspirator that is conveniently locatedto aspirate any fluids from the body in preparation forembalming. A body rinse fixture is provided for the cleaningand rinsing process during the final stages of body embalming.Heavy-duty grid plates are utilized to support the embalmingmachine. The drain surface below the grid plates are tiltedtoward the large sink, which includes a perimeter rinse. Theperimeter rinse prevents fluids from accumulating anywhere onthe surface. All utilities including water, electrical, drain and airventilation are attached to the embalming cart with quickdisconnects.Product DescriptionProduct No. CF100 — Right Approach SinkProduct No. CF200 — Left Approach SinkProduct No. CF300 — Center Approach SinkNOTE: Quantity of standard features may vary based upon modelthat is ordered. Example - instrument rinse tray is only on CF100and CF200 due to space constraints. Please contact <strong>Mopec</strong> formore information when ordering.CF Series Standard FeaturesDissection Area and Sink Well and Back Splash: Fabricatedwith a 2" (5 cm) rim and full 1" (2.5 cm) radiused corners, thedrain board areas are recessed 2" (5 cm) and sloped with a 1"(2.5 cm) drop toward the main sink well. The main sink is 6" (15.3cm) deep and holds approxi mately 18 gallons. Double creased forcomplete drainage and integrally constructed with the backsplash, it has no seams or caulk joints.Front Panel: Integral sink to front panel construction with nohidden areas for bacteria growth.Grid Plates: Work surface is elevated using removable gridplates above the drain area. Mounting is accomplished withoutpins, making them completely interchangeable and easilycleaned. The grid plates are perforated and recessed 1/2" (1.3 cm)below the sink ledge. (CF100 and CF200 have three grid plates,CF300 will have four grid plates).Instrument Rinse Tray: A built in instrument rinse tray can beused to rinse or drain organs and/or instruments. (The basket hasa grid panel design. Instrument rinse tray is only available on theCF100 and CF200.)Drawer: Drawers are flush mounted with a continuous handle.Double pan construction with built in slides. (CF100 and CF200have one drawer, CF300 has two, one on each side.)Hydro-Aspirator: Deluxe Hydro-Aspirator has a reverse flowfeature that instantly relieves clogging. Plumbed with a vacuumbreaker which prevents any pollutants from entering the watersystem.Faucet: Hot and cold water fixture with convenient wrist bladehandles, goose neck faucet and vacuum breaker fixture mounteddirectly on faucet.Receptacles: GFCI duplex receptacle with waterproof enclosure,cover. (CF100 and CF200 have one receptacle, CF300 has two.)Exhaust Duct: Ventilation exhaust ducting, located over the dissectionarea of the table, is designed to remove pungent odors.Body Rinse: A body rinse is provided which consists of a coldwater valve, serrated hose fitting, vacuum breaker, 8 ft. (243 cm)of clear tubing and hose hanger bracket. (CF100 and CF200have one body rinse, CF300 has two, one on each side).Hand Spray: Fabricated of a heavy-duty brass chrome platedhand held fixture with 8 ft. (243 cm) high pressure hose. (CF100and CF200 have one hand spray, CF300 has two, one on eachside).24821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CF Series Embalming WorkstationsCF200 Left approach embalming sinkand CF400 cart shown without traySuperior Construction: TIG welding on all seams and matingsections, ground smooth and regrained to match #4 satin finish.All plumbing and electrical lines are factory installed and onlyrequire on site hook up.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CF Series Optional FeaturesCO001 Leg Frame: For CF100 and CF200 onlyCO002 Leg Frame: For CF300 onlyCO003 Sink Perimeter Rinse Assembly: Provides a fullperimeter rinse on all four sides of the sink where the cart drains.Includes cold-water on/off water control valve, serrated hosefitting and perforated formed stainless steel tubing. Easilyremovable.CO004 Gas Valve Splash Mount: Laboratory gas fitting with 1/4turn on/off valve and serrated hose fitting.CO005 Air Valve Splash Mount: Laboratory air fitting with 1/4turn on/off valve and serrated hose fitting.CO006 Safety Eye Wash Splash Mount: Eye wash with built-invacuum breaker and retractable coiled hose and hanger.CO008 Fluorescent Light Fixture: 48" long, watertight,approved for complete wash down application.CO026 Chemical Fixtures: Chemical resistant fixtures with tallgooseneck faucets are provided for dispensing deionized waterand/or embalming solutions. The chemical resistant fixtures haveneedle valve control faucets for safety and accurate dispensingand filling of embalming equipment.CO027 Power Source: Switched power source for embalmingequipment.BL800 Disposal: Heavy-duty 1 HP disposal, complete with on/offswitch, water solenoid, and vacuum breaker.UO002 Splash Mounted Dispensing Fixture: Chemical resistantfixture with tall gooseneck faucet provided for dispensingdeionized water or embalming solutions.CF100 shown with optional leg frame123456789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com249
123456789CF100 Right Approach or CF200 LeftApproach Embalming SinkST<strong>AND</strong>ARD FEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (2)D GFCI Electrical OutletE Hydro AspiratorF Fixture w/Swing SpoutG Body RinseH Hand SprayI Large Instrument DrawerJ Instrument Rinse TrayK Cart-Fume Ventilation LockL Main Circuit Breaker SwitchOPTIONAL FEATURESCO001 Autopsy Sink Leg FrameCO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand Wall MountedCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 BL800 1 HP Disposal28.00 in71.1 cm84.00 in213.4 cmBCHIDKCF100, Right Approach SinkGUL 61010:2004CAN/CSA-C22.2NFPA 79-2002FEAJLFINISHEDWALL10115.00 in12.7 cm56.00 in142.2 cmFINISHED FLOOR34.00 in86.4 cmFINISHED FLOOR21.00 in53.3 cm61.00 in154.9 cm25021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CF300 Center Approach Embalming SinkST<strong>AND</strong>ARD FEATURESA Integral Sink (38” x 20” x 6”)B BacksplashC Removable Grid Plates (4)D GFCI Electrical Outlet (2)E Hydro AspiratorF Fixture w/Swing Spout (2)G Body Rinse (2)H Hand Spray (2)I Large Instrument Drawer (2)J Cart-Frame Ventilation LockK Main Circuit Breaker SwitchBEGF12OPTIONAL FEATURESCO002 Autopsy Sink Leg Frame (CC100 Only)CO003 Sink Perimeter RinseCO004 Gas ValveCO005 Air ValveCO006 Safety Eye Wash - Splash MountCO007 Exhaust Duct and Vent GrillCO008 Fluorescent Light AssemblyCO016 Scale Stand & Support SocketCO020 Organ Rinse BasketCO022 Evidence ScreenBL800 1 HP DisposalCHIDJAK3428.00 in71 cm114.00 in290 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-2002567FINISHEDWALL856.12 in142.6 cm34.00 in86 cm61.00 in155 cm21.00 in53.3 cm9104.86 in12.3 cmFINISHED FLOORFINISHED FLOOR1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com251
CF Series Embalming Cart with Tray1234567891011The CF400 Embalming CartThe Embalming Cart utilizes roller type body storage andprocessing equipment typically used for most anatomy departmentsand high capacity embalming facilities. The EmbalmingCart incorporates two full length plenum exhaust chambers tofully ventilate the cadaver during the embalming process.Exhaust air velocities can easily accommodate hazardousformaldehyde fumes. Electrical receptacles are convenientlylocated on both sides of the cart for saws, clippers or otherassociated equipment. Includes line cord with hospital gradeplug. The CF400 and CF401 Embalming Cart is universal andcan be utilized with either the CF100, CF200 or CF300Embalming Sinks. All of the above equipment also can be utilizedwith all Roller Style equipment.Product DescriptionCF400 Embalming Cart includes a 23" JC100 Body TrayCF401 Embalming Cart includes a 27" JC101 Body TrayCF400 Standard FeaturesReceptacles: GFCI duplex receptacle with waterproof enclosure,cover.Body Rinse: A body rinse is provided which consists of a coldwater valve, serrated hose fitting, vacuum breaker, 8 ft. (243 cm)of clear tubing and hose hanger bracket.Wheels/Casters: Heavy-duty 8" diameter non-corrosive powdercoated wheel. During transport, one caster is swivel locked foreasy mobility. When inactive, the caster can be locked in place.Superior Construction: TIG welding on all seams and matingsections, ground smooth and regrained to match #4 satin finish.All internal plumbing and electrical lines are factory installed andonly require on site hook up.Body Tray: All stainless steel construction. Two hand slots oneach end. Weight capacity of 375 pounds. Specify with or withoutdrain holes.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.25221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CF Series Embalming Cart with TrayDrawing depictsCF401 cart foruse with 27" trayIBA12F3JEHC431.25 in79.4 cm27.00 in68.6 cmJC101 (REF.)39.25 in99.7 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-2002564.00 in10.2 cmG79.00 in201.0 cm734.52 in87.7 cm19.81 in50.3 cm7.88 in20.0 cm6.38 in16.2 cmD35.54 in90.3 cmST<strong>AND</strong>ARD FEATURES:ST<strong>AND</strong>ARDA Roller AssemblyFEATURES:A Roller B Ventilation Assembly ChamberB Ventilation C Heavy-Duty Chamber Casters withC Heavy-Duty Total Lock System Casters withD Total G.F.C.I. Lock Outlet SystemD E G.F.C.I. Ventilation Outlet Table DrainE Ventilation F Exhaust Vent Table Connection Drain RemoverG Line Cord with Hospital Grade PlugF Exhaust Vent Connection RemoverH Heavy-Duty Cart FrameG Line I Full Cord Length with Tray Hospital Rinse Grade PlugH J Heavy-Duty Includes JC101 Cart Body Frame Tray!I Full Length Tray RinseJ Includes JC101 Body Tray!39.48 in100.3 cm25.75 in65.4 cm27.81 in70.6 cm89101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com253
CE100 Autopsy Table with Stationary Pedestal123CE100 shown with Portable Dissection Table (HE100)4567891011The CE100 pedestal autopsy table features <strong>Mopec</strong>’s downdraft ventilation systemThe CE100 Autopsy Table is a pedestal style table that incorporatesall of the convenient features necessary to efficientlyperform an autopsy. A standard feature of the CE100 table is<strong>Mopec</strong>’s downdraft ventilation system which helps ventilate thebody during an autopsy.The hydro-aspirator is conveniently located near the sink basinfor ease in collection and/or disposal of bodily fluids. Electricalreceptacles are provided on both sides of the table. A hot andcold water faucet is provided with a single lever control and avacuum breaker spout to safeguard the facility water supply. Adeck mounted Hand Spray with a high pressure hose allowscomplete rinsing of the body or table with the press of a singlelever. The autopsy table has an integrally constructed largesink and is creased toward the center for complete drainage.CE100 Standard FeaturesTable Top: The table top is fabricated of 14 gauge type stainlesssteel with a #4 satin finish with built in large sink on one end.Electrical: Two GFCI electrical receptacles with waterproofenclosures are positioned on each side of the pedestal.Hydro-Aspirator: Hydro-Aspirator is located on the end of thetable near the sink basin. The aspirator has a reversing valveto clear the aspirator of any foreign matter. The aspirator isdesigned to drain into the sink for collection or disposal andis completely plumbed with control valve, vacuum breakerand tubing.Integral Construction: Integral sink to front panel constructioneliminates sharp edges where bacteria can accumulate. Allwelded seamless construction provides durability.Hand Spray: Deck mounted Hand Spray for convenient access.Chrome plated brass with high pressure hose. Concealed shut offvalve located under table top.Faucet: Swing spout faucet with vacuum breaker protection.Modified CE100 autopsy tablePedestal: Table pedestal is fabricated of 18 gauge type stainlesssteel with a #4 satin finish.Grid Plate: Grid plates are recessed 1/2" and are supported bythe table’s edge. Four independent grid plates are perforated andremovable.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE100 Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Polypropylene ruleradheres to the edge of the table for easy specimen measuring.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.25421750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE100 Autopsy Table with Stationary PedestalST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutE Sink (20” x 12” x 12”)F Hand SprayG PedestalH Removable Grid Plates (4)I Down Draft Ventilation SystemJ Mixing ValveK Access PanelL Main Circuit Breaker SwitchOPTIONAL FEATURESCO009 Autopsy Table Perimeter Rinse AssemblyCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountBL800 1 HP DisposalABLIKGHFECDJ12345100.00 in254.0 cm630.00 in76.2 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-200278937.00 in94.0 cm10FINISHED FLOORFINISHED FLOOR1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com255
CE200 Elevating Pedestal Autopsy Table1234567891011The CE200 autopsy table is a pedestal style table thatincorporates an elevating mechanism within the pedestalwhich consists of three main assemblies: 1) Electro-Mechanical Actuator, 2) Elevating Frame Work, and 3) ExteriorPedestal Housing. The CE200 is capable of lifting and lowering8" using an electro mechanical actuator with a maximumlift capacity of 500 pounds.A standard feature of the CE200 elevating table is <strong>Mopec</strong>’sDowndraft Ventilation System, which helps ventilate the bodyduring an autopsy. A hydro-aspirator is conveniently locatednear the large sink basin for ease in collection and/or disposalof fluids. Electrical receptacles are provided on both sides ofthe table. A hot and cold water faucet is provided with a singlelever control and a vacuum breaker spout to safeguard thefacility water supply. A deck mounted hand spray with a highpressure hose allows complete rinsing of the body or tablewith the press of a single lever.CE200 Standard FeaturesIntegral Sink: Integral sink to front panel construction eliminatessharp edges where bacteria can accumulate. All welded, seamlessconstruction provides durability.Electrical: Two GFCI electrical receptacles with waterproofenclosures. One, located on each side of the pedestal.Hydro-Aspirator: Hydro-aspirator is located on the end of thetable near the sink. The aspirator has a reversing valve to clearthe aspirator of any foreign matter. The aspirator is designed todrain into the sink end for collection or disposal and is completelyplumbed with control valve, vacuum breaker and tubing.Hand Spray: Deck mounted Hand Spray for convenient access.Chrome plated brass with high pressure hose. Concealed shut offvalve located under table top.Faucet: Swing spout faucet with vacuum breaker protection.Pedestal Assembly: Table pedestal is fabricated of 18 gaugestainless steel with a #4 satin finish. The pedestal consists ofthree main assemblies: 1) Electro-Mechanical Actuator,2) Elevating Frame Work Assembly and 3) Exterior PedestalHousing. The elevating pedestal is a non-racking heavy-dutyframe construction, capable of lifting and lowering 8" (20.32 cm)via an electro mechanical actuator, which is much quieter. Theelectro mechanical actuator is capable of lifting a maximumcapacity of 500 lbs.Grid Plates: Grid plates are recessed 1/2" and supported by thetable edge. Four indepen dent, removable grid plates are perforatedand interchangeable.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE200 Optional FeaturesMeets ADA RequirementBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.25621750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE200 Autopsy Elevating Pedestal TableST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorA D Fixture w/Swing SpoutE Sink – 20” x 12” x 12”F Hand SprayG PedestalH Removable Grid Plates (4)I Down Draft Ventilation SystemJ Mixing ValveK Access PanelL Main Circuit Breaker SwitchOPTIONAL FEATURESCO009 Autopsy Table Perimeter Rinse Assembly LCO017 Scale Stand Table MountBL800 1 HP DisposalABLIKHGFCDJE12345100.00 in254.0 cm630.00 in76.2 cmADA Compliant7UL 61010:20048CAN/CSA-C22.2NFPA 79-2002910(32.00 - 40.00) in(81.3 - 101.6) cm11FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com257
CE210 Elevating Bariatric Autopsy Table1234567891011The CE210 bariatric autopsy table is a pedestal style table thatelevates with a conveniently located switch. The CE210 isextra wide, a full 40” wide, and can hold up to 1000 pounds.This table can accommodate your biggest bariatric patients. Astandard feature of the CE210 elevating table is <strong>Mopec</strong>’sDowndraft Ventilation System, which helps ventilate the bodyduring an autopsy. A hydro-aspirator is conveniently locatednear the large, creased sink basin for ease in collection and/ordisposal of fluids. Electrical receptacles are provided on bothsides of the table. A hot and cold water faucet is provided witha single lever control and a vacuum breaker to safeguard thefacility water supply. A deck mounted hand spray with a highpressure hose allows complete rinsing of the body or tablewith the press of a single lever.CE210 Standard FeaturesElectrical: Two GFCI duplex electrical receptacles with waterresistant covers. One, located on each side of the pedestal.integral Sink: Integral sink to front panel construction eliminatessharp eaves and ledges where bacteria can accumulate. All welded,seamless construction provides durability.Hydro-Aspirator: Located on the end of the table near the sink.The hydro-aspirator has a reversing valve to clear the aspirator ofany foreign matter. The aspirator is designed to drain into the sinkend for collection or disposal and is completely plumbed withcontrol valve, vacuum breaker and tubing.Hand Spray: Deck mounted hand spray for convenience.Chrome plated brass with high pressure hose. Concealed shut offvalve under table top.Faucet: Swing spout faucet with vacuum breaker protection.Pedestal Assembly: The pedestal consists of three main assemblies:1) Electro-Mechanical Actuator, 2) Scissor Lift Stabilizerand 3) Exterior Pedestal Housing. The elevating pedestal is nonracking,heavy-duty frame construction, capable of lifting and lowering8" via the electro-mechanical actuator, which is a much quieterand more sanitary elevating mechanism than the standardhydraulic. The piston system electro-mechanical actuator is capableof lifting a maximum capacity of 1,000 lbs.Grid Plates: Four removable grid plates are recessed 1/2" andsupported by the table edge without pins.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE210 Optional FeaturesMeets ADA RequirementBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket located on the sink end of the autopsy table. Thestand includes a support tube allowing the scale to swing anddrain into the main sink.25821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE210 Elevating Bariatric Autopsy TableBCDEFGHIST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutE Sink (25” x 12” x 12”)F Hand SprayG Elevating PedestalH Removable Grid Plates (4)I Down Draft Ventilation SystemJ Mixing ValveK Access PanelLDownElevationDraft VentilationSwitchSystemM Main Circuit Breaker SwitchJKOPTIONAL FEATURESLCO009 Autopsy Table Perimeter Rinse AssemblyMCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountBL800 1 HP DisposalABMIKLLHGFECDJ1234100.00 in254.0 cm5640.00 in101.6 cmADA Compliant78UL 61010:2004CAN/CSA-C22.2NFPA 79-2002910(32.00 - 40.00) in(81.3 - 101.6) cm11FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com259
CE300 Rotating Autopsy Table Pedestal1234567891011CE300 shown with optional disposalThe CE300 autopsy table rotates 180° and is a pedestaldesign that includes all the convenient features to perform anautopsy. The CE300 autopsy table is designed for autopsysuites with limited space or unique construction requirements.Astandard design feature of the CE300 autopsy table is<strong>Mopec</strong>’s Downdraft Ventilation System.A hydro-aspirator is conveniently located near the sink basinfor ease in collection and/or disposal of bodily fluids.Electrical receptacles are provided on both sides of the table.A hot and cold water faucet is provided with a single lever controland a vacuum breaker to safeguard facility water supply. Adeck mounted Hand Spray with a high pressure hose allowscomplete rinsing of the body or table with a press of a singlelever. The autopsy table has an integrally constructed largesink and is creased toward the center for complete drainage.Weight capacity is 750 pounds.CE300 Standard FeaturesTable Top: The table top is fabricated of 14 gauge stainless steelwith a #4 satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are positioned on each side of the pedestal.Hydro-Aspirator: Located on the end of the table near the sink,the aspirator is provided with a reversing valve to clear theaspirator of any foreign matter. The aspirator is designed to draininto the sink for collection or disposal and is completely plumbedwith control valve, vacuum breaker and tubing.Pedestal: Table pedestal is fabricated of 11 gauge type 304stainless steel with a #4 satin finish.Integral Sink: Integral sink to front panel construction eliminatessharp edges where bacteria can accumulate. All weldedseamless construction provides durability.Hand Spray: Deck mounted Hand Spray for convenience.Chrome plated brass with high pressure hose. Concealed shut offvalve located under table top.Faucet: Swing spout faucet with vacuum breaker protection.Grid Plates: Four removable grid plates are recessed 1/2" andsupported by the table edge without pins.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE300 Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.Features Downdraft Ventilation26021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE300 Rotating Autopsy Table PedestalST<strong>AND</strong>ARD FEATURESOPTIONAL FEATURESA Table Top CO009 Autopsy Table Perimeter Rinse AssemblyB GFCI Electrical Outlet (2) CO012 Inch/Centimeter ScaleC Hydro Aspirator CO017 Scale Stand Table MountD Fixture w/Swing Spout BL800 1 HP DisposalE Sink (20” x 12” x 8”)F Hand SprayIG Rotating PedestalH Removable Grid Plates (4)I Down Draft Ventilation SystemJ Mixing ValveK Access PanelL Main Circuit Breaker SwitchHC D J12ABL3135°90°45°4KGFE5180°0°6UL 61010:2004CAN/CSA-C22.2NFPA 79-200278100.00 in254.0 cm30.00 in76.2 cm937.00 in94.0 cm10FINISHED FLOORFINISHED FLOOR1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com261
CE310 Rotating and Elevating Autopsy Table1234567891011The CE310 autopsy table is a pedestal style table that incorporatesan elevating and rotating mechanism within thepedestal. A standard feature of the CE310 elevating table is<strong>Mopec</strong>’s Downdraft Ventilation System, which helps ventilatethe body during an autopsy.A hydro-aspirator is conveniently located near the sink basinfor ease in collection and/or disposal of bodily fluids. Electricalreceptacles are provided on both sides of the table. A hot andcold water faucet is provided with a single lever control and avacuum breaker to safeguard the facility water supply. A deckmounted Hand Spray with a high pressure hose allows completerinsing of the body or table with the press of a singlelever. The autopsy table has an integrally constructed largesink and is creased toward the center for complete drainage. Astainless steel roller bearing carousel allows the table to lockat rotations of 0°, 90° and 180°.The elevating pedestal consists of an Electro-MechanicalActuator. The elevating pedestal is capable of lifting and lowering8" (from 32" - 40"). Maximum capacity is 750 pounds.CE310 Standard FeaturesTable Top: The table top is fabricated of 14 gauge stainless steelwith a #4 satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are positioned on each side of the pedestal.Integral Sink: Integral sink to front panel construction eliminatessharp edges where harmful bacteria can accumulate. All welded,seamless construction provides durability.Hand Spray: Deck mounted hand spray for convenience.Chrome plated brass with high pressure hose. Concealed shut offvalve located under table top.Hydro-Aspirator: Hydro-aspirator is located on the end of thetable near the sink. The aspirator has a reversing valve to clearthe aspirator of any foreign matter. The aspirator is designed todrain into the sink end for collection or disposal and is completelyplumbed with control valve, vacuum breaker and tubing.Faucet: Swing spout faucet with vacuum breaker protection.Pedestal Assembly: The pedestal consists of two mainassemblies: 1) Electro-Mechanical Actuator, 2) Exterior PedestalHousing. The elevating pedestal is capable of lifting and lowering8" via an electro mechanical actuator. The electro mechanicalactuator is capable of lifting a maximum capacity of 750 lbs.Table pedestal is fabricated of 11 gauge stainless steel with a #4satin finish.Grid Plates: Grid plates are recessed 1/2" and supported by thetable edge without pins. Four indepen dent grid plates are perforatedand removable.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE310 Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket located on the sink end of the autopsy table. Thestand includes a support tube allowing the scale to swing anddrain into the main sink.Meets ADA Requirement26221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE310 Rotating and Elevating Autopsy TableST<strong>AND</strong>ARD FEATURESOPTIONAL FEATURESA Table Top CO009 Autopsy Table Perimeter Rinse AssemblyB GFCI Electrical Outlet (2) CO012 Inch/Centimeter ScaleC Hydro Aspirator CO017 Scale Stand Table MountD Fixture w/Swing Spout BL800 1 HP DisposalE Sink (20” x 12” x 8”)F Hand SprayG Rotating and Elevating PedestalIH Removable Grid Plates (4)I Down Draft Ventilation SystemJ Mixing ValveK Access PanelL Elevation SwitchF M Main Circuit Breaker SwitchGHI Down Draft Ventilation SystemAJBKLMM90°HCDJ1234135°45°KGLFE5180°K0°L6ADA Compliant78UL 61010:2004CAN/CSA-C22.2NFPA 79-20029100.00 in254.0 cm30.00 in76.2 cm10(32.00 - 40.00) in(81.3 - 101.6) cm11FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com263
CE340 (Windsor) Autopsy Table123456789The CE340, Windsor Autopsy table offers a flat creased worksurface with no obstructions. The contour raised perimeteredge is designed to divert the fluids to the waste drain. A bodyspray hose aids in the disposal of fluids. The table top edge isrounded for effortless cleaning and allows easy body placementand removal. Weight capacity of 700 pounds (318.18 kg,50 stone).CE340 Standard FeaturesBody Spray Hose: The hot and cold water spray hose is convenientlylocated under the work surface for accessibility. The extralong high pressure hose allows complete rinsing of the table. Thespray hose is fabricated of chrome-plated brass along with asingle lever mixing valve.Table Top: Top is made of 14 gauge stainless steel with a #4satin finish.BL750 Disposal - 3/4 HP 230 volts/50 hz/1ph. Disposal does notinclude vacuum breaker.BL800 Waste Disposal: Heavy-duty 1 HP 115 volts/60 hz/1phdisposal, complete with on/off switch, water solenoid, and vacuumbreaker.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.CE340 Optional Features1011CE340 Optional FeaturesCO030 Elevation - Electrical mechanism lift allows the table toelevate from 34" (86.3 cm) to 42" (106.6 cm).CO031 Elevation/Rotating - Allows table to elevate 34" (86.3cm) to 42" (106.6 cm) and rotate 180°. Rotation not soldindependently of elevation - option includes both featuresCO032 Electrical Outlet - Watertight GFCI receptacle box.CO033 Deep Sink - Deep sink measuring 20" L (50.8 cm ) x 12"(30.48 cm) W x 7" D (17.78 cm). Complete with two (2) eachfaucets with wristblade handles and aspirator. Aspirator onlyavailable if deep sink option is ordered.NOTE: When this option is ordered, the length of the table willincrease an extra 10" (25.4 cm) in length to 100" (254 cm).Disposal BL750GFCI Electrical outlet CO032Deep Sink CO003Elevation/Rotation CO03126421750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE340 (Windsor) Autopsy TableAAST<strong>AND</strong>ARD FEATURESA Sloped Table TopB Waste DrainC PedestalD Access Panel1OPTIONAL FEATURESCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountCO030 ElevationCO031 Elevation/RotatingCO032 Electrical OutletCO033 Deep SinkBL750 3/4 HP DisposalBAB23BL750 3/4 HP Disposal4CDCO032 Electrical Outlet5630.00 in76.2 cm7UL 61010:2004CAN/CSA-C22.2NFPA 79-2002883.00 in210.8 cm30.00 in76.2 cm(REF.)9108(34.00 - 42.00) in(86.4 - 106.7) cm11FINISHED FLOORFINISHED FLOORF FINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com265
CE350 (Salisbury) Downdraft Autopsy Table1234567891011CE350 shown with optional elevation, deep sink, electrical outlet and filtration device.<strong>Mopec</strong> is proud to offer a unique innovative pedestal style Downdraft Autopsy Table. Asa standard feature, the downdraft ventilation system greatly reduces harmful fumes fromthe work area. This highly efficient downdraft table will make for a safer and morepleasant work environment. The optional Filtration Device provides an additional level ofremoving harmful fumes. The filtration option should be considered if your facility haslimited or no ventilation/air handling system available. The filters are quick and easy toreplace as shown. The CE350 has a weight capacity of 700 pounds (318.18 kg,50 stone).CE350 Standard FeaturesUnique Airflow Body Grid Plates: The perforated body grid plates are engineered tomaximize the downdraft airflow. The heavy-duty construction allows for heavier bodies.Body Spray Hose: The hot and cold water spray hose is conveniently located under thework surface for accessibility. The extra long high pressure hose allows complete rinsing ofthe table. The spray hose is fabricated of chrome-plated brass along with a single levermixing valve.Table Top: Top is made of 14 gauge stainless steel with a #4 satin finish.CE350 Optional FeaturesCO030 Elevation - Electrical mechanism lift allows the table to elevate from 34" (86.3 cm) to42" (106.6 cm).CO031 Elevation/Rotating: Allows table to elevate 34" (86.3 cm) to 42" (106.6 cm) androtate 180°. Rotation not sold independently of elevation - option includes bothCO032 Electrical Outlet: Watertight GFCI receptacle box.CO033 Deep Sink: Extra deep sink measuring 20" L (50.8 cm) x 12" (30.48 cm) W x 7"(17.78 cm) D. Complete with two (2) each faucets with wristblade handles and aspirator.Aspirator only available if deep sink option is ordered.NOTE: When this option is ordered, the length of the table will increase an extra 10" (25.4cm) in length to 100" (254 cm).CO034 Filtration System: Filtration system for particle and fume extraction. Easy accessfor filter replacement. System includes (1) Particle Filter, (1) Combination charcoal/potassium permangeate filter and (1) High Efficiency filter. (See replacement numbers)BL750 Disposal - 3/4 HP 230 volts/50 hz/1ph. Disposal does not come with vacuumbreaker.BL800 Waste Disposal: Heavy-duty 1 HP 115 volts/60 hz/1ph disposal, complete with on/offswitch, water solenoid, and vacuum breaker.ISO: Quality Management System in compliance with ISO 9001:2008 and applies: Design,Engineering, Manufacturing and Installation of Equipment Distribution of Supplies forMorgue, Pathology, Histology and Necropsy Applications.Top ViewReplacement FiltersBF017 - Particle filterBF014 - Charcoal/potassium permanganatecombination filterBF018 - High Efficiency Filter26621750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE350 (Salisbury) Downdraft Autopsy TableST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutA E Sink (20” x 12” x 7”)F Hand SprayG PedestalH Removable Grid Plates (3)I High-Flow Down Draft Ventilation SystemJ Mixing ValveK Access PanelL Elevation SwitchM Main Circuit Breaker SwitchKLMAHI C D J12390°K G L B MFE4135°45°L5180°0°OPTIONAL FEATURESCO009 Autopsy Table Perimeter Rinse AssemblyCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountCO030 ElevationCO031 Elevation/RotatingCO032 Electrical OutletCO033 Deep SinkCO034 HEPA FilterBL750 3/4 HP Disposal678UL 61010:2004CAN/CSA-C22.2NFPA 79-20029100.00 in254.0 cm32.00 in81.3 cm1029.75 in75.6 cm(34.00 - 42.00) in(86.4 - 106.7) cm11FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com267
CE400 Short Autopsy Pedestal Table1234567891011The CE400 Autopsy Table is a pedestal style table thatincludes all of the features necessary to efficiently complete anautopsy. Shorter in length the CE400 is ideal for pediatricautopsies. Unit includes <strong>Mopec</strong>’s standard downdraft ventilationsystem.A hydro-aspirator is conveniently located near the sink basinfor ease in collection and/or disposal of fluids. Electrical receptaclesare provided on both sides of the table to access poweron either side. A hand spray with a high pressure hose allowscomplete rinsing of the body or table with the press of a lever.The autopsy table has an integrally constructed sink and iscreased toward the center for complete fluid drainage. A sink islocated under the removable grid plates.CE400 Standard FeaturesTable Top: The table top is fabricated of 14 gauge stainless steelwith a #4 satin finish with built in large sink on one end.Faucet: Swing spout faucet with vacuum breaker protection.Hand Spray: Hand Spray has chrome plated brass with a highpressure hose.Hydro-Aspirator: Located on the end of the table near the sinkbasin. The aspirator has a reversing valve to clear the aspiratorof any foreign matter. The aspirator is designed to drain into thesink for collection or disposal and is completely plumbed withcontrol valve, vacuum breaker and tubing.CE400 Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler, Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.26821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE400 Short Autopsy Pedestal TableST<strong>AND</strong>ARD B FEATURESA Table C TopB GFCI D Electrical Outlet (2)C Hydro E AspiratorD Fixture F w/Swing SpoutE Sink G (20” x 12” x 12”)F Hand H SprayG Pedestal I Down Draft Ventilation SystemH Removable J Grid Plates (3)I Down K Draft Ventilation SystemJ Mixing L ValveK Access PanelL Main Circuit Breaker SwitchOPTIONAL FEATURESCO009 Autopsy Table Perimeter Rinse AssemblyCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountBL800 1 HP DisposalABLLIKHGFECDJ1234578.00 in198.1 cm630.00 in76.2 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-20027891037.00 in94.0 cm11FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com269
CE500 (Non-Vented) Autopsy Table withLeg Frame1234567891011CE500 shown with scale stand (CO017) and autopsy scale (BB002)The CE500 Autopsy Table has an integrally constructed largenon vented sink with leg frame which is creased toward thedrain basin for complete and easy fluid drainage.This CE500 autopsy table is an economical autopsy table thatincludes all the convenient features necessary to efficientlyperform an autopsy. The CE500 has an open frame design.With this style, the downdraft cone is not utilized and isunavailable. Standard features include a hydro-aspirator, adeck mounted hand spray, a hot/cold water fixture, twowaterproof electrical receptacles, a deep sink and grid plates.The table frame is welded construction and fabricated of 1-5/8"(4 cm) stainless steel tubing with #4 satin finish.CE500 Standard FeaturesTable Top: The table top is fabricated of 14 gauge stainless steelwith a #4 satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are included.Hydro-Aspirator: Located on the end of the table near the sinkbasin. The aspirator has a reversing valve to clear the aspiratorof any foreign matter. The aspirator is designed to drain into thesink for collection or disposal of fluids and is completely plumbedwith control valve, vacuum breaker and tubing.Faucet: Swing spout faucet with vacuum breaker protection.Integral Sink: Construction eliminates sharp edges wherebacteria can accumulate. All welded seamless constructionprovides durability.Grid Plate: Grid plates are recessed 1/2" and are supported onthe table edge without pins. Four independent perforated gridplates are perforated and removable.Hand Spray: Deck mounted for convenient access. Chromeplated brass fixture with a flow control valve and a high pressurehose.Table Leg Frame: Welded construction and fabricated of 16gauge stainless steel tubing with #4 satin finish.CE500 Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.While in use the perimeter rinse helps eliminate an accumulationof debris under the grid plates during an autopsy.CO012 Replaceable Ruler Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.27021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE500 (Non-Vented) Autopsy Table withLeg FrameST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutE Sink (20” x 12” x 12”)F Hand SprayG Leg FrameH Removable Grid Plates (4)I Mixing ValveJ Main Circuit Breaker SwitchOPTIONAL FEATURESCO009 Autopsy Table Perimeter Rinse AssemblyCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountBL800 1 HP DisposalAHBJCDI123GFE4100.00 in254.0 cm5630.00 in76.2 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-200278937.00 in94.0 cm10FINISHED FLOORFINISHED FLOOR1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com271
CE Series L-Shaped Autopsy TablesCE600 w/Integral Right Wing or CE700 w/Integral Left Wing1234567891011The CE600 Autopsy Table Hand Spray has a high pressure hose coiled on a J-hook allowing completerinsing of the entire body or table. The unique L shape design allows organ removal and dissection.The CE Series L-shaped autopsy table is a pedestal designthat includes all of the convenient features necessary toperform an autopsy along with an added integrally constructedright or left wing. Unit includes <strong>Mopec</strong>’s standard downdraftventilation system. A hydro-aspirator is conveniently locatednear the sink basin for ease in collection and/or disposal of fluids.Waterproof electrical receptacles are provided on bothsides of the table. A hot and cold water faucet is provided witha single lever and a vacuum breaker to safeguard the facilitywater supply. The autopsy table has an integrally constructedlarge sink and is creased toward the center for completedrainage.The wing or end of the table is supported by a cabinetpedestal which contains a drawer and storage compartment.Fabricated of stainless steel with a #4 satin finish.WORKSURFACE HAS NO SEAMS OR OVERLAPS.UNIT IS SHIPPED IN ONE PIECE AS SHOWN.CE Series L-Shaped Standard FeaturesTable Top: The table top is fabricated of stainless steel with a #4satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are provided.Hydro-Aspirator: Located on the end of the table near the sinkbasin. The aspirator is provided with a reversing valve to clearthe aspirator of any foreign matter. The aspirator is completelyplumbed with control valve, vacuum breaker and tubing.Faucet: Swing spout faucet has a vacuum breaker controlled bya single lever hot/cold handle.Hand Spray: Hand Spray is fabricated of chrome plated brassand includes a high pressure hose.Grid Plates: Grid plates are recessed 1/2" and are supported bythe table edge without pins. Four independent grid plates are perforatedand removable.Wing: Wing is an integral part of the table completely welded,ground smooth and regrained to match the adjacent surface.Pedestal: Table pedestal is fabricated of 18 gauge stainless steeltype 304 with a #4 satin finish.CE Series L-Shaped Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker. Plumbedand wired, ready for use.CO009 Autopsy Table Perimeter Rinse Assembly: The perimeterrinse is designed with a 1/2" diameter perforated tube encompassingthe full inner perimeter of the pedestal style tables. Whilein use the perimeter rinse helps eliminate an accumulation ofdebris under the grid plates during an autopsy.CO012 Replaceable Ruler, Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.Product DescriptionProduct No: CE600 Right WingProduct No: CE700 Left WingISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.27221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE Series L-Shaped Autopsy TablesCE600 w/Integral Right Wing or CE700 w/Integral Left WingCKDEIJACE700 Shown1234HFGLMB530.00 in76.2 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-200224.00 in61.0 cm90.00 in228.6 cmST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutE Sink (20” x 12” x 12”)F Sink SprayG Main PedestalH Storage CabinetI Removable Grid Plates (4)J Down Draft Ventilation SystemK Mixing ValveL Access PanelM Main Circuit Breaker SwitchOPTIONAL FEATURESCO009 Autopsy Table Perimeter RinseCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountBL800 1 HP Disposal6789100.00 in254.0 cm37.00 in94.0 cm1011FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com273
CE Series L-Shaped Elevating Autopsy TablesCE650 w/Integral Right Wing or CE750 w/Integral Left Wing1234567891011The CE Series elevating L-shaped autopsy table includes asink and drain, a left or right wing, and all the features necessaryto perform an autopsy. The entire workstation, includingthe wing, elevates up or down as needed. A standard featureon either autopsy table is <strong>Mopec</strong>’s downdraft ventilation system,which helps ventilate the body during an autopsy. Ahydro-aspirator is conveniently located near the sink basin forease in collection and/or disposal of fluids.Electrical receptacles are provided on both sides of the table.A hot and cold water faucet is provided with a single lever anda vacuum breaker to safeguard your facility’s water supply.The autopsy table includes a large sink and is creased towardthe center for complete drainage.This table offers you two wing designs: CE650 is a right-handwing, CE750 is a left-hand wing. The wings are an integralpart of each table. All welds use stainless steel filler media,Exposed welds are ground smooth and grained to match theworkstation’s #4 satin finish. Both the CE650 and CE750 haveadjustable table height, 32" to 40", which can increase legroom and alleviate back strain for any technician.WORKSURFACE HAS NO SEAMS OR OVERLAPS.UNIT IS SHIPPED IN ONE PIECE AS SHOWN.CE Series L-Shaped Standard FeaturesTable top: The table top is fabricated of stainless steel with a #4satin finish. A large sink is integrated on one end of the table.Wing: Wing is an integral part of the table completely welded,ground smooth and regrained to match the adjacent surface.Faucet: Swing spout faucet has a vacuum breaker controlled bya single lever hot/cold handle.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are provided.Grid plates: The four independent grid plates are perforated andinterchangeable.Elevating Mechanism: The entire workstation can be elevatedusing an electro hydraulic lifting mechanism that features awatertight switch. Each corner is elevated with independentMeets ADA Requirementelectro mechanic lifting cylinders that are synchronized to eliminatemisalignment.Hydro-aspirator: A hydro-aspirator, located on the end of thetable near the sink basin, includes a reversing valve to clear theaspirator of any foreign matter. The aspirator is completelyplumbed with a control valve, vacuum breaker, and tubing.Hand Spray: The hand spray is fabricated of chrome platedbrass and includes a high pressure hose.CE Series L-Shaped Optional FeaturesBL800 Waste Disposal: Heavy-duty 1 HP disposal, completewith on/off switch, water solenoid, and vacuum breaker.CO009 Autopsy Table Perimeter Rinse Assembly: Theperimeter rinse is designed with a 1/2" diameter perforated tubeencompassing the full inner perimeter of the pedestal style tables.When in use and during an autopsy, the perimeter rinse helpseliminate an accumulation of debris under the grid platesCO012 Replaceable Ruler, Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replaced.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.Product DescriptionProduct No: CE650 Right WingProduct No: CE750 Left WingISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.27421750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE Series L-Shaped Elevating Autopsy TablesCE650 w/Integral Right Wing or CE750 w/Integral Left WingCE650 ShownACJDEUL 61010:20041CAN/CSA-C22.2NFPA 79-20022HI3BLGKF490.00 in228.6 cm24.00 in61.0 cm30.00 in76.2 cmST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutE Sink (20” x 12” x 12”)AF Sink SprayG Main PedestalH Removable Grid Plates (4)I Down Draft Ventilation SystemJ Mixing ValveK Access PanelL Main Circuit Breaker SwitchOPTIONAL FEATURESCO009 Autopsy Table Perimeter Rinse AssemblyCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountBL800 1 HP Disposal5678100.00 in254.0 cm9ADA Compliant1015.00 in38.1 cm(32.00 - 40.00) in(81.3 - 101.6) cm11FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com275
CE800 Autopsy Sink Service Island1234567891011The CE800 is a pedestal style autopsy service island. Thisstyle autopsy sink accommodates all <strong>Mopec</strong> autopsy carts andincludes most of the amenities to perform an autopsy. TheCE800 features <strong>Mopec</strong> Backdraft ventilation. Our exclusivebackdraft system safely removes harmful chemical fumes fromthe encapsulated work area.A hydro-aspirator is conveniently located at the table ledge forease in collection and/or disposal of fluids. A hot/cold waterfaucet is provided with a single lever control with vacuumbreaker protection. A water protected electrical receptacle isprovided.CE800 Standard FeaturesTable Top Sink: The table top sink is fabricated of 14 gaugestainless steel with a #4 satin finish.Electrical: One GFCI duplex electrical receptacle with waterresistant cover is positioned on the side of the pedestal.Hydro-Aspirator: Located on the end of the table above the sinkbasin. Provided with a reversing valve to clear the aspirator ofany foreign matter. Completely plumbed with control valve,vacuum breaker and tubing.Faucet: Swing spout faucet has a vacuum breaker controlled bya single lever hot/cold handle.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE800 shown with optional Fluid Collection System (BK610)CE800 Optional FeaturesCO003 Sink Perimeter Rinse Assembly: The perimeter rinse isdesigned with a 1/2" diameter perforated tube encompassing thefull inner perimeter of the pedestal style tables. While in use theperimeter rinse helps eliminate an accumulation of debris underthe grid plates during an autopsy.CO012 Replaceable Ruler, Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replaced.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.CO035 Formalin Fixture: Chemical resistant fixtures with tallgooseneck faucets are provided for dispensing embalming solutionsCO036 Water Fixture: Chemical resistant fixtures with tallgooseneck faucets are provided for dispensing deionized water.CO037 Hand Spray: Hand Spray is fabricated of chrome platedbrass including a high pressure hose.BL800 Disposal: Heavy-duty 1 HP disposal, complete with on/offswitch, water solenoid, and vacuum breaker.CE800 Autopsy Service Island shown with DC100 Autopsy Cart27621750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE800 Autopsy Sink Service IslandST<strong>AND</strong>ARD FEATURESA Sink Well (34” x 28” x 7”)B Hydro AspiratorC Fixture w/Swing SpoutD PedestalE Mixing ValveOPTIONAL FEATURESCO009 Sink Perimeter RinseCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountBL800 1 HP DisposalBK610 Fluid Collection SystemBCE123A440.00 in101.6 cmD5639.00 in99.1 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-200278936.00 in91.4 cm29.00 in73.7 cm 25.50 in64.8 cm1011FINISHED FLOORFINISHED FLOOR21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com277
CE850 Autopsy Sink Service Tablewith Cabinet1234567891011The CE850 is a autopsy sink service table. This style autopsysink, table and cabinet accommodates all <strong>Mopec</strong> autopsy cartsand includes amenities to perform an autopsy.A hydro-aspirator is conveniently located on the sink ledge forease in collection and/or disposal of fluids. A hot/cold waterfaucet is provided with a single lever control with vacuumbreaker protection. Two waterproof electrical receptacles areprovided.CE850 Standard FeaturesTable Top: The service table is fabricated of 14 gauge stainlesssteel with a #4 satin finish with built in large sink on one end.Electrical: Two GFCI duplex electrical receptacles with waterresistant covers are positioned on either side of the sink.Hydro-Aspirator: Located on the end of the table above the sinkbasin. Provided with a reversing valve to clear the aspirator ofany foreign matter. Completely plumbed with control valve,vacuum breaker and tubing.Water Fixture: Swing spout fixture has a vacuum breakercontrolled by a single lever hot/cold handle.Hand Spray: Hand Spray is fabricated of chrome plated brassincluding a high pressure hose.Table Wing: Fabricated of 18 gauge stainless steel, the tablewing includes a medium size instrument drawer and storagecompartment.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.Any of <strong>Mopec</strong>’s standard autopsy cartscan be used with this systemAPPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE850 Optional FeaturesIdeal for teaching facilities/institutionsCO012 Replaceable Ruler, Inch/Centimeter: Long wearing ruleradheres to edge of the table. Can be pealed off and replacedwhen needed.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.CO023 Header Rinse with Control Knob: Ten nozzles for waterdistribution allows for easy rinsing of tableBK610 Fluid Collection System: Two autoclavable four literheavy duty polypropylene bottles with stainless steel carriage.Includes ten feet of tubing for hook-up.BL800 Disposal: Heavy-duty 1 HP disposal, complete with on/offswitch, water solenoid, and vacuum breaker.27821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE850 Autopsy Sink Service Tablewith CabinetST<strong>AND</strong>ARD FEATURESA Sink Well (39” x 34” x 10”)B GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutE Hand SprayF PedestalG Service Table SurfaceH Storage Cabinet with DrawerI Mixing ValveJ Main Circuit Breaker SwitchEACDIG12OPTIONAL FEATURESCO017 Scale Stand Table MountCO023 Header Rinse BarBL800 1 HP DisposalBK610 Fluid Collection System3FJBH4110.00 in279.4 cm552.00 in132.1 cm40.00 in101.6 cm38.00 in96.5 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-2002678931.00 in78.7 cm37.00 in94.0 cm10FINISHED FLOORFINISHED FLOOR1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com279
CE900 Autopsy Pedestal Table1234567891011Modified CE900, with foot pedalsThe CE900 Autopsy Table is a pedestal style table constructedof stainless steel that includes all of the convenient featuresnecessary to efficiently perform an autopsy. The CE900 is theshortest version of pedestal style autopsy tables that <strong>Mopec</strong>offers and is ideal for pediatric institutions. This style alsoincludes an integrally constructed sink into the table top asopposed to a sink wing. Unit comes equipped with <strong>Mopec</strong>’sstandard downdraft ventilation system.A hydro-aspirator is conveniently located near the sink basinfor ease in collection and/or disposal of fluids. Electrical receptaclesare provided on both sides of the table. A deck mountedHand Spray with a high pressure hose allows complete rinsingof the body or table with the press of a single lever.CE900 Standard FeaturesElectrical: Two GFCI duplex electrical receptacles with waterresistant covers are positioned on each side of the pedestal.Integral Sink: Integral sink to front panel construction eliminatessharp eaves and ledges where bacteria can accumulate. Allwelded, seamless construction provides durability.Hydro-Aspirator: Hydro-aspirator is located on the end of thetable near the sink. The aspirator has a reversing valve to clearthe aspirator of any foreign matter. The aspirator is designed todrain into the sink end for collection or disposal and is completelyplumbed with control valve, vacuum breaker and tubing.Pedestal: Table pedestal is fabricated of stainless steel with a #4satin finish.Recessed Table Top: Table top is fabricated of stainless steelwith a #4 satin finish with built in large sink on one end.Hand Spray Rinse: Hand Spray is deck mounted for convenienceand has chrome plated brass fixture with a flow controlvalve and high pressure hose.Grid Plates: Grid plates are recessed 1/2" and supported by theedge. Three independent grid plates are perforated and removable.Hot/Cold Fixture: At one end of the table is a hot/cold fixture.The fixture is provided with a single lever hot/cold handle and alarge swing spout faucet with vacuum breaker protection.Sink: An integrally constructed sink is included.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not justindividual components.CE900 Optional FeaturesBL800 Disposal: Heavy-duty 1 HP disposal, complete with on/offswitch, water solenoid, and vacuum breaker.CO017 Scale Stand Table Mounted: Table edge mounted scalesupport socket. The stand includes a support tube allowing thescale to swing and drain into the main sink.CO023 Header Rinse with Control Knob: Ten nozzles for waterdistribution allows for easy rinsing of table.CO038 Foot Pedal: Hot/cold mixing valve28021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
CE900 Autopsy Pedestal TableST<strong>AND</strong>ARD FEATURESA Table TopB GFCI Electrical Outlet (2)C Hydro AspiratorD Fixture w/Swing SpoutE Sink - 14” x 12” x 11”F Hand SprayG PedestalH Removable Grid Plates (3)I Down Draft Ventilation SystemJ Mixing ValveK Access PanelL Main Circuit Breaker SwitchOPTIONAL FEATURESCO038 Foot PedalCO012 Inch/Centimeter ScaleCO017 Scale Stand Table MountCO036 Header Rinse with Control KnobBL800 1 HP DisposalALBHICDJFE123460.00 in152.4 cmKG5630.00 in76.2 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-200278937.00 in94.0 cm10FINISHED FLOORFINISHED FLOOR1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com281
FD200 Embalming Station123456FD200 Standard FeaturesElectrical: One GFCI duplex electrical receptacle with waterresistant cover is positioned on the side of the embalming station.Faucet: Swing spout faucet has a vacuum breaker and wristblade handles.Extra Tall Faucet: Faucet with hot/cold fixtureRinsing Valves: Includes 10 feet of clear tubingHydro-Aspirator: The aspirator has a reversing valve to clear theaspirator of any foreign matter. The aspirator is designed to draininto the sink for collection or disposal and is completely plumbedwith control valve, vacuum breaker and tubing.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.APPROVAL: TUV Listed & Certified: Tests to UL61010-1 :2004standards in addition to CAN/CSA and NFPA standards. Thislisting covers the entire product as an entity and not just individualcomponents.FD200 Optional FeaturesCO009 Perimeter Rinse System: The perimeter rinse isdesigned with a 1/2" diameter perforated tube encompassing thefull inner perimeter of the embalming sink.CO024 Fitted Sink Cover: Large fitted cover for aerosol containmentwithin sink.BL800 Disposal: Heavy-duty 1 HP disposal, complete with on/offswitch, water solenoid, and vacuum breaker.78<strong>Mopec</strong> also offers Embalming Accessories.Stainless Steel Sanitray9The FD200 Embalming Station is constructed of all stainlesssteel. Complete with an extra long sink and an extra tall faucet.The built in sterilization tray is excellent for trocars.10Trocars11CO024 Optional Fitted Sink Cover shownSee Autopsy Accessories page 107.28221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
FD200 Embalming StationST<strong>AND</strong>ARD FEATURESA Sink Well (25” x 17” x 10”)B GFCI Electrical OutletC Hydro AspiratorD Fixture w/Swing SpoutE Leg FrameF Extra-tall Faucet (21” tall)G Sterilization TrayH Body RinseOPTIONAL FEATURES:CO024 Fitted Sink CoverCO009 Perimeter Rinse System (Not Shown)BL800 Heavy-duty 1 HP Disposal (Not Shown)DHGAEFBC123456789UL 61010:2004CAN/CSA-C22.2NFPA 79-20021011FD200 shown with DC100 Autopsy Cart21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com283
HE100 Tilting Dissection Table1234567891011HE100 shown tiling downThe HE100 Portable Cart can be used with most autopsy tables.Heavy duty casters let you roll the cart to any area of theautopsy table where additional grossing space is needed. Theend of the cart top is tapered allowing all fluids to drain intothe table sink.HE100 Standard FeaturesTop: Dissection top is all stainless stainless construction,fabricated of 14 gauge steel with #4 satin finish. The cart top is48" L x 24" W (121 cm x 61 cm), with a tapered opening to siton the autopsy table edge.Frame: Frame is 1-1/2" (3.8 cm) wall stainless steeltubing. All welding is continuous with an approximate 1/8" radiusbead. All welds are clean and free of burrs and discoloration.Simple Height Adjustment: The elevating cart top adjusts inheight on one end, from 38.5" to 41.5" (40.5" is level) in1" (2.5 cm) increments.HE100 shown tiling upISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.HE100 shown overhanging CE Series Autopsy Table28421750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
HE100 Tilting Dissection Table48.12 in122.1 cm40.39 in102.6 cm24.00 in61.0 cmABC12345678910ST<strong>AND</strong>ARD FEATURES:A Elevation AdjusterB CasterC Heavy-Duty Frame!20.00 in50.8 cm1121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com285
HL100 Elevating C-Arm X-Ray Table1234567891011HL100 shown with JC100 trayThis table is specifically designed for use with portable x-rayfluoroscopy machines featuring a C-arm electronic imagedetector. The table’s open frame construction allows the C-armclear travel of almost the entire length of the table andsubframe. There are no cross tubes, so the C-arm x-raymachine can come in from either side of the table.A remarkably practical table, it can be fitted with our JC100heavy-duty all stainless steel body tray, our JC200 highdensity polyethylene x-ray body tray or our JC400 flatpolyethylene cart top. These trays allow for easy continuitybetween x-ray and autopsy procedures, with the JC200polyethylene tray leaving virtually no shadowing on x-rays.The subframe is designed with a slope of 1", and has afour -piston lift with manual crank. Material finish is #4 satinfinish. The HL100 features long-lasting non-corrosive 8"heavy-duty, powder coated plastic and polyurethanetread casters.HL100 Standard FeaturesFrame: Consists of two cart top supports, four cross braces, fourlegs, two wire cover supports, four endcaps and (4) 8" casters.Fabrication: All welding is TIG type with only stainless steel as afiller media.Piston Lift: Four piston lift with manual crank.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.HL100 Optional FeaturesJC100 Stainless Steel Body Tray: Stainless steel construction,18 gauge with two hand slots on each end. Weight capacity 375pounds, 23" W x 77" L. Specify with or without drain hole.JC200 Polyethylene Body Tray: High density white polyethylene.Specifically designed for x-ray purposes. Weight capacity 350pounds, 77-1/2" L x 23-1/8" W.JC400 Flat Polyethylene White Cart Top: For use with HL100.Includes hand slots on each end, 84" L x 23". With manual crank.28621750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
HL100 Elevating C-Arm X-Ray TableCBA1234579.11 in201.0 cm27.25 in69.2 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-200267835.00 in88.0 cmStandard Features:A 8" casters, one directional and three brakingB Four piston lift with manual cranksC Can be fabricated to accept various tray sizes!23.11 in58.7 cm36.00 in90.3 cmOPTIONAL FEATURES:JC100 – Stainless Steel Body Tray (Not Shown)JC200 – Polyethylene Body Tray (Not Shown)JC400 – Flat Polyethylene White Cart Top9101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com287
HL200 C-Arm X-Ray Table1234567891011The HL200 is specifically designed for use with portable x-rayfluoroscopy machines featuring a C-Arm electronic imagedetector. The table’s open frame construction on one sideallows the C-arm clear travel of almost the entire length of thetable and subframe.HL200 Standard FeaturesCart Frame/Welding: Fabricated of 1-1/2" (3.8 cm) heavy gaugestainless steel tubing. All welding is TIG type utilizing onlystainless steel as a filler media. All welding is continuous with anapproximate 1/8" (.38 cm) radius bead and are clean and free ofburrs and discoloration. Weld fillets are approximately 1/8"(.64 cm) in diameter.Casters: The HL200 features heavy-duty 8" diameternon-corrosive powder coated wheels. During transport, onecaster is swivel locked for easy mobility. When inactive, thecasters can be locked in place.ISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.HL215Product DescriptionProduct No: HL200 Cart Frame OnlyProduct No: HL205 Cart with GA600 Gray Fiberglass TrayProduct No: HL210 Cart with GA800 Blue ABS Plastic TrayProduct No: HL215 Cart with GA850 Tan ABS Plastic Tray28821750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
HL200 C-Arm X-Ray Table1234Removable Top A B C532.00 in81.3 cmUL 61010:2004CAN/CSA-C22.2NFPA 79-20026782.00 in208.3 cm841.74 in106.0 cm40.88 in104.0 cm91011ST<strong>AND</strong>ARD FEATURES:A Removable TopB Heavy-Duty FrameC Casters w/Wheel Brake – Swivel Lock!21750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com289
Cart Tops12345678GA100 Autopsy Cart TopTop fabricated of 14 gauge stainless steel with #4 satin finish. The top measures32" W x 80-1/2" L x 1-3/4" ( 81.2 cm x 204.4 cm x 4.4 cm) profile with a 2" ledgearound the full perimeter. The top is recessed 1" deep and creases toward thedimpled drain hole. The drain plug is provided with a stainless steel chainpermanently affixed to the top flange. All exposed weldsare ground smooth and grained to match the #4 satin finish.Product No. GA100GA300 Autopsy Cart Top (Inner Trough)Top fabricated of 14 gauge stainless steel with #4 satin finish. The topmeasures 32" W x 80-1/2" L x 1-3/4" profile with a 2" ledge around thefull perimeter. The top has a 1" deep trough around full interiorperimeter of tray which is 1.5" wide. The body lays on a 5/8" raisedarea. The drain plug is provided with a stainless steel chainpermanently affixed to the top flange. All exposed welds areground smooth and grained to match the #4 satin finish.Product No. GA300GA600 Autopsy Cart Top - FiberglassThis x-rayable cart top is constructed with a stainless steel subframeand fabricated from a chopped fiberglass material, graycolor. Also included is a smooth top trough with large drainhole.The tray measures 31" W x 82" L x 2" D. Fits DA100, DB100and DC100 autopsy carts.Product No. GA60091011DB000 and autopsy top, GA600Close up of drainISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.29021750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
Cart TopsGA800 X-Ray Tray - BlueGA850 X-Ray Tray - TanThe GA800 is a revolutionary, all plastic, x-rayable body traythat is designed to universally interface with any manufacturer’scomplete line of autopsy carts and body racking systems.The GA800/GA850 can be used with cantilever rack storagesystems (IA100 and IB100), as well as conveyor rack systems(IE100) making these trays the most versatile body trays in theindustry.Constructed of vacuum formed ABS plastic, the GA800/GA850is an incredibly durable and lightweight body tray that is ideal forany medical examiner’s office. Molded in a <strong>Mopec</strong> exclusive“Photo-Blue” color or tan color, the GA800/GA850 body traysallow for impeccable forensic documentation; offering anunmatched background for photography.To further aide examination, the work surface incorporatesrecessed channels for improved drainage of fluids. These channelsspan the length of the body tray and empty into a deepperimeter trough designed to direct all waste fluids toward adrain hole at one end. Tray includes a drain stopper and safetychain.Product No. GA800 - BlueProduct No. GA850 - TanISO: Quality Management System in compliance with ISO9001:2008 and applies: Design, Engineering, Manufacturing andInstallation of Equipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.GA800 shown on cart123456789101121750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com291
CH Series Scrub Sink12The hand washing scrub sink is an essential product for anymorgue providing a specific place to wash hands before andafter an autopsy or any handling of infectious material.Designed with a 12" high backsplash and full 3/4" radius cornerconstruction. All welded integral construction, 14 gaugestainless steel with #4 satin finish, no parting seams which cancollect bacteria in the sink and backsplash.Mounting is achieved by simply mounting the gussets on thewall and placing the sink on gussets. Sink is then bolted to thegusset. Easily cleaned by hand or with a hose.3CH Series Standard FeaturesFixture with Swing Spout: Center gooseneck faucetWall Mount Brackets: Heavy duty 14 gauge stainless steelmounting gussets are provided.456ST<strong>AND</strong>ARD FEATURESA Sink Well (25” x 15” x 11”)B Fixture w/Swing SpoutC Wall Mount bracket (2)D Foot A PedalABFoot Pedal: Foot pedal valves for water controlProduct DescriptionProduct No. CH100 - 30" length sink, single faucetProduct No. CH200 - 48" length sink, double faucet730.00 in76.2 cm80 in5 cm30.00 in76.2 cmCAF920.00 in50.8 cmDFINISHEDWALL1011ISO: Quality Management System in compliancewith ISO 9001:2008 and applies: Design,Engineering, Manufacturing and Installation ofEquipment Distribution of Supplies for Morgue,Pathology, Histology and Necropsy Applications.FINISHED FLOORFINISHED FLOOR29221750 Coolidge Hwy. Oak Park, MI 48237 USA 800-362-8491 248-291-2040 www.mopec.com
Change language