Review on thermal energy storage with phase change: materials ...
Review on thermal energy storage with phase change: materials ... Review on thermal energy storage with phase change: materials ...
254 B. Zalba et al. / Applied Thermal Engineering 23 (2003) 251–283Fig. 2. Classification of energy storage materials [1].which have been used, their classification, characteristics, advantages and disadvantages and thevarious experimental techniques used to determine the behaviour of these materials in melting andsolidification.2.1.1. Non-commercial/commercial materialsMany substances have been studied as potential PCMs, but only a few of them are commercialisedas so.Tables 1–6 present the different substances, eutectics and mixtures (inorganic, organic and fattyacids), that have been studied by different researchers for their potential use as PCMs. Some oftheir thermophysical properties are included (melting point, heat of fusion, thermal conductivityand density), although some authors give further information (congruent/incongruent melting,volume change, specific heat, etc.).Table 7 shows a list of the commercial PCMs available in the market with their thermophysicalproperties as given by the companies (melting point, heat of fusion and density), and the companywhich is producing them.2.1.2. Organic/inorganic materialsA comparison of the advantages and disadvantages of organic and inorganic materials is shownin Table 8.Notable among inorganic materials are hydrated salts and their multiple applications in thefield of solar energy storage [3,4]. In Chapter 1 of Lane [2] there is an extensive review of phasechange materials and especially hydrated salts. Chapter 3 of the same work covers the differenttypes of encapsulation and their compatibility with different materials.A significant number of authors have based their work on organic materials such as alkanes,waxes or paraffins [46–52]. Within organic materials, there is a class called MCPAM (Phasechange materials made up of molecular alloys), formed by alkane-based alloys which have the
Table 1Inorganic substances with potential use as PCMCompoundB. Zalba et al. / Applied Thermal Engineering 23 (2003) 251–283 255Melting temperature(°C)Heat of fusion(kJ/kg)Thermal conductivity(W/m K)Density(kg/m 3 )H 2 O 0 [1,5] 333 [1] 0.612 (liquid, 20 °C) [1] 998 (liquid, 20 °C) [1]334 [5] 0.61 (30 °C) [5] 996 (30 °C) [5]917 (solid, 0 °C) [1]LiClO 3 3H 2 O 8.1 [6,7] 253 [6] n.a. 1720 [6]ZnCl 2 3H 2 O 10 [8] n.a. n.a. n.a.K 2 HPO 4 6H 2 O 13 [8] n.a. n.a. n.a.NaOH 3 1H 2 2O 15 [8] n.a. n.a. n.a.15.4 [7]Na 2 CrO 4 10H 2 O 18 [8] n.a. n.a. n.a.KF 4H 2 O 18.5 [1,6,7,9] 231 [1,6,9] n.a. 1447 (liquid, 20 °C) [1]1455 (solid, 18 °C) [1]1480 [6]Mn(NO 3 ) 2 6H 2 O 25.8 [18] 125.9 [10] n.a. 1738 (liquid, 20 °C) [10]1728 (liquid, 40 °C) [10]1795 (solid, 5 °C) [10]CaCl 2 6H 2 O 29 [4,11] 190.8 [4,11] 0.540 (liquid, 38.7 °C) 1562 (liquid, 32 °C) [4,11][4,11]29.2 [7] 171 [1,9] 0.561 (liquid, 61.2 °C) 1496 (liquid) [1][11]29.6 [6] 174.4 [12] 1.088 (solid, 23 °C) [4,11] 1802 (solid, 24 °C) [4,11]29.7 [1,9] 192 [6] 1710 (solid, 25 °C) [1]30 [8] 1634 [12]29–39 [12] 1620 [6]LiNO 3 3H 2 O 30 [6] 296 [6] n.a. n.a.Na 2 SO 4 10H 2 O 32.4 [1,7,9] 254 [1,9] 0.544 [1] 1485 (solid) [1]32 [13] 251.1 [12] 1458 [12]31–32 [12]Na 2 CO 3 10H 2 O 32–36 [12] 246.5 [12] n.a. 1442 [12]33 [6,7] 247 [6]CaBr 2 6H 2 O 34 [4,7,11] 115.5 [4,11] n.a. 1956 (liquid, 35 °C) [4,11]2194 (solid, 24 °C) [4,11]Na 2 HPO 4 12H 2 O 35.5 [8] 265 [12] n.a. 1522 [12]36 [12] 280 [6]35[6,9] 281 [9]35.2 [7]Zn(NO 3 ) 2 6H 2 O 36 [4,7,11] 146.9 [4,11] 0.464 (liquid, 39.9 °C)[4,11]1828 (liquid, 36 °C) [4,11]36.4 [1,9] 147 [1,9] 0.469 (liquid, 61.2 °C) [7] 1937 (solid, 24 °C) [4,11]2065 (solid, 14 °C) [1]KF 2H 2 O 41.4 [7] n.a. n.a. n.a.KðCH 3 COOÞ1 1H 2 2O 42 [8] n.a. n.a. n.a.K 3 PO 4 7H 2 O 45 [8] n.a. n.a. n.a.Zn(NO 3 ) 2 4H 2 O 45.5 [8] n.a. n.a. n.a.Ca(NO 3 ) 2 4H 2 O 42.7 [7] n.a. n.a. n.a.47 [8]Na 2 HPO 4 7H 2 O 48 [7] n.a. n.a. n.a.(continued on next page)
- Page 1 and 2: Applied Thermal Engineering 23 (200
- Page 3: B. Zalba et al. / Applied Thermal E
- Page 8 and 9: 258 B. Zalba et al. / Applied Therm
- Page 10 and 11: 260 B. Zalba et al. / Applied Therm
- Page 12 and 13: 262 B. Zalba et al. / Applied Therm
- Page 14 and 15: 264 B. Zalba et al. / Applied Therm
- Page 16 and 17: 266 B. Zalba et al. / Applied Therm
- Page 18 and 19: 268 B. Zalba et al. / Applied Therm
- Page 20 and 21: 270 B. Zalba et al. / Applied Therm
- Page 22 and 23: 272 B. Zalba et al. / Applied Therm
- Page 24 and 25: 274 B. Zalba et al. / Applied Therm
- Page 26 and 27: 276 B. Zalba et al. / Applied Therm
- Page 28 and 29: 278 B. Zalba et al. / Applied Therm
- Page 30 and 31: 280 B. Zalba et al. / Applied Therm
- Page 32 and 33: 282 B. Zalba et al. / Applied Therm
Table 1Inorganic substances <strong>with</strong> potential use as PCMCompoundB. Zalba et al. / Applied Thermal Engineering 23 (2003) 251–283 255Melting temperature(°C)Heat of fusi<strong>on</strong>(kJ/kg)Thermal c<strong>on</strong>ductivity(W/m K)Density(kg/m 3 )H 2 O 0 [1,5] 333 [1] 0.612 (liquid, 20 °C) [1] 998 (liquid, 20 °C) [1]334 [5] 0.61 (30 °C) [5] 996 (30 °C) [5]917 (solid, 0 °C) [1]LiClO 3 3H 2 O 8.1 [6,7] 253 [6] n.a. 1720 [6]ZnCl 2 3H 2 O 10 [8] n.a. n.a. n.a.K 2 HPO 4 6H 2 O 13 [8] n.a. n.a. n.a.NaOH 3 1H 2 2O 15 [8] n.a. n.a. n.a.15.4 [7]Na 2 CrO 4 10H 2 O 18 [8] n.a. n.a. n.a.KF 4H 2 O 18.5 [1,6,7,9] 231 [1,6,9] n.a. 1447 (liquid, 20 °C) [1]1455 (solid, 18 °C) [1]1480 [6]Mn(NO 3 ) 2 6H 2 O 25.8 [18] 125.9 [10] n.a. 1738 (liquid, 20 °C) [10]1728 (liquid, 40 °C) [10]1795 (solid, 5 °C) [10]CaCl 2 6H 2 O 29 [4,11] 190.8 [4,11] 0.540 (liquid, 38.7 °C) 1562 (liquid, 32 °C) [4,11][4,11]29.2 [7] 171 [1,9] 0.561 (liquid, 61.2 °C) 1496 (liquid) [1][11]29.6 [6] 174.4 [12] 1.088 (solid, 23 °C) [4,11] 1802 (solid, 24 °C) [4,11]29.7 [1,9] 192 [6] 1710 (solid, 25 °C) [1]30 [8] 1634 [12]29–39 [12] 1620 [6]LiNO 3 3H 2 O 30 [6] 296 [6] n.a. n.a.Na 2 SO 4 10H 2 O 32.4 [1,7,9] 254 [1,9] 0.544 [1] 1485 (solid) [1]32 [13] 251.1 [12] 1458 [12]31–32 [12]Na 2 CO 3 10H 2 O 32–36 [12] 246.5 [12] n.a. 1442 [12]33 [6,7] 247 [6]CaBr 2 6H 2 O 34 [4,7,11] 115.5 [4,11] n.a. 1956 (liquid, 35 °C) [4,11]2194 (solid, 24 °C) [4,11]Na 2 HPO 4 12H 2 O 35.5 [8] 265 [12] n.a. 1522 [12]36 [12] 280 [6]35[6,9] 281 [9]35.2 [7]Zn(NO 3 ) 2 6H 2 O 36 [4,7,11] 146.9 [4,11] 0.464 (liquid, 39.9 °C)[4,11]1828 (liquid, 36 °C) [4,11]36.4 [1,9] 147 [1,9] 0.469 (liquid, 61.2 °C) [7] 1937 (solid, 24 °C) [4,11]2065 (solid, 14 °C) [1]KF 2H 2 O 41.4 [7] n.a. n.a. n.a.KðCH 3 COOÞ1 1H 2 2O 42 [8] n.a. n.a. n.a.K 3 PO 4 7H 2 O 45 [8] n.a. n.a. n.a.Zn(NO 3 ) 2 4H 2 O 45.5 [8] n.a. n.a. n.a.Ca(NO 3 ) 2 4H 2 O 42.7 [7] n.a. n.a. n.a.47 [8]Na 2 HPO 4 7H 2 O 48 [7] n.a. n.a. n.a.(c<strong>on</strong>tinued <strong>on</strong> next page)
Change language