Annual Reports - Indraprastha Gas Limited

FORM-B
EFFORTS MADE IN TECHNOLOGY ABSORPTION ARE GIVEN BELOW:
Research & Development
1. Specific areas in which R&D carried i) In Burckhardt 400 SCMH package engine jacket water
out by the Company temperature use to go beyond trip limits, during high ambient
temperature. The same has been overcome by installing
additional motor driven forced draft external radiator.
ii) In ten Galileo compressors Safex Panel did not work for CO2 flooding system. Wiring was modified and incorporated in
existing PLC panel. This has prevented the false alarms and
tripping of machine.
iii) In DR machines it was observed that reset push button was
being bypassed to avoid tripping of the machines. Software has
been modified to overcome this problem to ensure safe
operation of the machine.
iv) Component level repair of the dispenser electronic cards has
been started successfully.
v) In old dispensers frequent problem of auto cut was observed at
200 bar. To overcome the problem ‘COMPAC’ make PRV are
being installed successfully. This will help in dispensing of gas at
safe pressure.
2. Benefits derived as a result of The Company has derived benefits in the form of Cost savings
the above R&D and improved operational efficiency of equipments.
3. Expenditure incurred on R&D No direct expenditure.
i. Capital
ii. Recurring
iii. Total
iv. % of total R&D expenditure
with total turnover
A check up camp for school buses in progress during the Fire and Safety Week.
11