Leica TPS400 Series Easy, quick, reliable and powerful - Boels Geo ...

Theft-protectionThe PIN-code feature prevent unauthorizedpersons from using theinstrument. This increases your datasecurity. Without correct code, theEquipment can’t be operated, dataerased and makes it unattractive tosteal. This protects you from havingdamages, increases your safety andpossibly lowers your insurance rates.Direct.dxfWith “Direct.dxf” functionality, datacan be read directly from the instrumentin dxf-format and read intoAutoCAD ® on a PC without any intermediatesteps. Coordinates, codesand point numbers can be stored indifferent layers.Laser plummetEasy to center over a set up pointthanks to the laser plummet. Theintensity of the laser point can beadjusted step-by-step to maintainvisibility even in critical lighting conditions.The time consuming task ofcentering with the optical level isnow redundant.Dual axis compensatorA fully automatic dual axis compensatorperforms fine leveling and guaranteesperfect horizontal alignment. For applicationsfrom mobile platforms thecompensator may be deactivated.Individual Data exchangeData exchange has been implementedin such a flexible way that justabout any format can be created.This allows data to be transferred toany software directly from the compatiblefor transfer to other surveyinstruments and GPS. The requiredprograms are delivered with theinstrument. Information can beexchanged between the instrumentand a computer by standard RS232cable, USB connection or wireless®. Data can be configuredto enable communication with mostdata collectors.

Leica TPS400Technical specificationsand System featuresLeica TC403/5/7Leica TCR403/5/7 powerLeica TCR403/5/7 ultra-Infrared Distance Measurement (IR)-Infrared Distance Measurement (IR)-PinPoint R100 Reflectorless Distance Measurement (RL)-Infrared Distance Measurement (IR)-PinPoint R300 Reflectorless Distance Measurement (RL)ApplicationsIn your daily work the TPS400 totalstations supports you with a wholerange of integrated easy to useprograms Surveying Reference line Stake Out Free Station Height transfers Area (plan) Volume Tie distance Remote height Hidden point Target OffsetTechnical data TPS 403 TPS 405 TPS 407Angle measurements (Hz, V)MethodAbsolute continuousDisplay resolution1" / 0.1 mgon / 0.01 milStandard deviation (ISO 17123-3) 3" (1 mgon) 5" (1.5 mgon) 7" (2 mgon)TelescopeMagnification30 xField of view1° 30' (26 m at 1 km)Min. target distance1.7 mReticleilluminatedCompensatorSystemElectronic 2 axis oil compensatorSetting accuracy 1" 1.5" 2"Infrared Distance measurement (IR)Measuring range with circular prism GPR13'500 mMeasuring with reflective foil (60 mm x 60 mm)250 mStandard deviation (ISO 17123-4) (fine/quick/tracking) 2 mm + 2 ppm/5 mm + 2 ppm/5 mm + 2 ppmTime for a measurement (fine/quick/tracking)< 1 sec/< 0.5 sec/< 0.15 secPinPoint-Reflectorless Distance measurement (RL)Range: PinPoint R100 (“power”) 170 m (90 % reflective)(Medium atmospheric conditions) PinPoint R300 (“ultra”) > 500 m (90 % reflective)Laser at GPR circular reflector 7'500 mStandard deviation (ISO 17123-4)3 mm+2 ppm/5 mm+2 ppm(Normal/Tracking)Time per meas. (Normal/Tracking)typ. 3 s/1 sPoint size at 100 m12 mm x 40 mmCommunicationInternal data storage10'000 data blocksInterfaceRS232Data formatsGSI/IDEX/ASCII/dxf/Freely definable formatsOperationDisplayGraphics 160 x 280 pixels,Alphanumeric 8 lines x 31 charactersLaser plummetTypeLaser point, brightness adjustable in stepsAccuracy1.5 mm at 1.5 m instrument heightEnvironmental conditionsTemperature range (operation) -20° C to +50° C (-4° F to +122° F)Dust and splash proof (IEC 60529)IP54Humidity95 %, non condensingWeightWeight including battery and tribrach5.2 kgOperating period with GEB121approx. 6 hoursNumber of distance measurements with GEB121 approx. 9'000

Rough & tough

Whether you want to survey a parcel of land or objects on a constructionsite, determine measured points on facades or in rooms, gather thecoordinates of a bridge or a tunnel – Leica Geosystems’ total stationsprovide the right solution for every application.They unite reliable results with easy operation and user-friendly applications.Our total stations are designed to meet your specific requirements.Modern technology enables you to work fast and productively,thanks to the straightforward and clearly structured range of functions.When it has to be right.Illustrations, descriptions and technical specifications are not binding and may change.Printed in Switzerland – Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2006.732270en – V.06 – RDVTotal Quality Management –Our commitment to totalcustomer satisfactionAsk your local Leica Geosystemsdealer for more informationabout our TQM program.Distance meter(PinPoint R100/R300):Laser class 3R in accordance withIEC 60825-1 resp. EN 60825-1Leica TPS700Product brochureLeica TPS800Product brochureLeica MobileMatrixProduct brochureoLaser plummet:Laser class 2 in accordance withIEC 60825-1 resp. EN 60825-1Distance meter (IR):Laser class 1 in accordance withIEC 60825-1 resp. EN 60825-1Guide light (EGL):LED class 1 in accordance withIEC 60825-1 resp. EN 60825-1The Bluetooth ® word mark andlogos are owned by Bluetooth SIG,Inc. and any use of such marks byLeica Geosystems AG is under license.Other trademarks and trade namesare those of their respective owners.Leica Geosystems AGHeerbrugg, Switzerlandwww.leica-geosystems.com