PICBASIC PLUS LITE Manual - Profe Saul

PICBASIC PLUS CompilerPICBASIC PLUS Commands and Directives (continued)PIXELPLOTPOKEPOTPRINTPULSINPULSOUTPWMRANDOMRCINREADREMREPEAT…UNTILRESTORERETURNRSINRSOUTSERVOSET_OSCCALSHINSHOUTSNOOZESLEEPSOUNDSTOPSWAPSYMBOLUNPLOTWHILE…WENDRead a single pixel from a Graphic LCD.Set a single pixel on a Graphic LCD.Write byte to register.Read potentiometer on specified pin.Display characters on LCD.Measure pulse width on a pin.Generate pulse to a pin.Output pulse width modulated pulse train to pin.Generate a pseudo-random number.Measure pulse width on a pin.Read byte or word from memory.Add a remark to the source code.Execute statements until condition is true.Adjust the position of data to READ.Continue at statement following last GOSUB.Asynchronous serial input from fixed pin and baud.Asynchronous serial output to fixed pin and baud.Control a servo motor.Calibrate the on-chip oscillator.Synchronous serial input.Synchronous serial output.Power down processor for short period of time.Power down processor for a period of time.Generate tone or white-noise on specified pin.Stop program execution.Exchange the values of two variables.Create an alias to a constant, port, pin, or registerClear a single pixel on a Graphic LCD.Execute statements while condition is true.21Copyright Crownhill 2001