Network Camera Server VB101

Hardware and Software RequirementsHardware and Software RequirementsWebview Livescope Viewer SoftwareCompatible Cameras (optional)Java Viewer version 3.10PCIBM PC/AT compatibleOperating SystemWindows 95/98 or Windows NT 4.0 (IE 4.0 or later required)/Windows 2000Web BrowserNetscape Navigator/Communicator 4.5 or later,or Microsoft Internet Explorer 4.01 or later required* This viewer is installed on the VB101 and is automatically downloaded by the client at access.* This software may not run stably on operating systems other than those listed above.Canon Communication CameraVC-C4/VC-C4R(NTSC)Canon Communication CameraVC-C4R(NTSC)Canon Communication CameraVC-C3(NTSC/PAL)1Helper Viewer version 3.10PCOperating SystemWeb BrowserIBM PC/AT compatibleWindows 95/98 or Windows NT 4.0 (IE 4.0 or later required)/Windows 2000Netscape Navigator/Communicator 4.5 or later,or Microsoft Internet Explorer 4.01 or later required* This software must be installed beforehand.* It can be installed free of charge from the CD-ROM for the VB101, or the following Web site.URL: http://www.x-zone.canon.co.jp/WebView-E/download/dload.htmThe wide converter WL-37 (for the VC-C4) and the wide converter WD-37 (for the VC-C3) areavailable as optional accessories.eTipCompatible NetworksWhile other cameras can be used, the camera control functions will not beavailable. Only the video functions can be used.Before Using the VB101cNoteThe helper viewer or plug-in viewer for Webview Livescope version 1.21, 2.01and 3.0 can also be used, but some of the functions differ.On Macintosh computers, some of the functions of the helper viewer forWebview Livescope version 1.20 are not available.• 10 Base-T/100 Base-TX Ethernet (auto negotiation)• Public switched telephone networks (Use a recommended modem card)Compatible PCMCIA CardsUse a recommended PCMCIA card. For further information, contact your Canon dealer.Webview Livescope MV Monitoring Station Software version 1.0 (optional)Compatible Cables (optional)ComputerOSWeb BrowserIBM PC/AT compatible deviceCPU: Pentium II 266 MHz or better, RAM: 64 Mbytes or better, Hard disk capacity: 300 Mbytes or betterWindows 95/98 or Windows NT 4.0/Windows 2000Microsoft Internet Explorer 5 or later requiredRS-232C cables for camera control and video cables are available as optional accessories inlengths other than the ones provided. For further information, contact your Canon dealer.16 17