Safety Angle Transducer Type Series Potentiometric 530 400
Safety Angle Transducer Type Series Potentiometric 530 400
Safety Angle Transducer Type Series Potentiometric 530 400
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Safety</strong> <strong>Angle</strong> <strong>Transducer</strong> <strong>Type</strong> <strong>Series</strong><strong>Potentiometric</strong> <strong>530</strong> <strong>400</strong>Special features• <strong>Potentiometric</strong> measuring principle with conductiveplastic resistance track.• Redundant design for safety relevant applications.• Extremely rugged construction with stainless steel shaftand housing out of sea-water proof aluminum alloy orstainless steel.• Heavy duty series for extreme applications available.• Long lifetime.• High resolution combined with good linearity.• Available in various versions (see orderingspecifications). Customized versions on request.Electrical dataFunction angle single/redundant (see ordering specifications) 70° ±1° 145° ±1° 334° ±1°Defined measuring range (symmetric to electrical center) ±30° ±60° ±165°Nominal resistance of track 3 kΩ ±20 % 2 kΩ ±20 % 5 kΩ ±20 %Linearity related to 360° ≤ ±0.25 %Micro linearity ≤ ±0.1 %Deviation track A to B (for redundant versions) ≤ ±2 %Temp. coefficient of output-to-applied voltage ratio 3 ppm / °CRecommended operating wiper current≤ 10 μAWiper current in case of malfunction≤ 10 mAWiper protection resistor2 kΩAllowed power consumption ≤ 2.0 W at +40 °C / ≤ 0.1 W at +85 °CAllowed track supply voltage≤ 28 VEnvironmental propertiesProtection class (ISO 20653) housing/cable inlet IP6K6K / IP6K8 (1m;12h) / IP6K9Kwith factory-mounted cableProtection class (ISO 20653) shaft inletdependent from housing – look ordering specificationOperating and storage temperature range -40 °C to +85 °COscillation resistance5 ... 2000 Hz, A MAX = 0,75 mm, a MAX = 20 gBump resistance50 g / 11 msD<strong>530</strong><strong>400</strong>de-kurz page 1/4MOBIL ELEKTRONIK GMBH • Bössingerstraße 33 • D-74243 Langenbeutingen • 07946/9194 -0 -130 • www.mobil-elektronik.com
<strong>Safety</strong> <strong>Angle</strong> <strong>Transducer</strong> <strong>Type</strong> <strong>Series</strong><strong>Potentiometric</strong> <strong>530</strong> <strong>400</strong>Mechanical dataShaft diameterSee ordering specificationsMaximum axial load Standard: 70 N Heavy duty: 250 NMaximum radial load Standard: 250 N Heavy duty: 900 NMaximum torque Standard: 5 Nm Heavy duty: 12 NmLifetimeJittering test (2° amplitude at center, 100 Hz)Mechanical function angleCorrosion protection Shaft:Housing:Electrical connection for flexible laying(see ordering specifications, detailed data on request)Electrical connection for fixed laying(see ordering specifications, detailed data on request)50 x 10 6 movements inside electrical function angle50 x 10 6 cycles360° continuous (max. 2000 times)Stainless steelAnodized sea-water proof aluminum alloyalternatively: stainless steel (see ordering specifications)Highly flexible, shielded PUR pezial cable,min. bending radius 100 mm,temperature range -30 °C … +80 °C,weather- and UV-proof,optional with additional conduitFlexible, shielded PVC cable,min. bending radius 100 mm,temperature range -30 °C … +80 °COrdering SpecificationsResistance track (function angle) single 70°single 145°single 334°redundant 70°redundant 145°redundant 334°Mechanical configuration (housing) standard (aluminum) / IP6K7 0ConnectorCable lengthCable typewithout7-pole DIN72585 / IP6K7 / IP6K9K4-pole M12x1 connector on the housing / IP6K8 (1m;12h)7-pole DIN72585 directly on housing/ IP6K7 / IP6K9K<strong>530</strong> 4 - Z -012567ACJKwithout (preference for flanged connectors)length 2.0 m0020without (preference for flanged connectors)6 x 0.50 flexible useCustomized versions standard 0Shaft Ø12 mm for standard versions 0Levers standard: type:without -155 mm / 7 x M8 414 304110 mm / 4 x M8 414 318013ABD<strong>530</strong><strong>400</strong>de-kurz page 2/4MOBIL ELEKTRONIK GMBH • Bössingerstraße 33 • D-74243 Langenbeutingen • 07946/9194 -0 -130 • www.mobil-elektronik.com
Dimensional drawing standard version<strong>Safety</strong> <strong>Angle</strong> <strong>Transducer</strong> <strong>Type</strong> <strong>Series</strong><strong>Potentiometric</strong> <strong>530</strong> <strong>400</strong>Dimensional drawingflanged connector DIN 72585Dimensional drawingflanged connector M12x1Connector DIN 72585pinsignal name1 sensor A: negative supply2 channel A: signal output3 channel A: positive supply4 sensor B: negative supply5 channel B: signal output6 channel B: positive supply7 screenD<strong>530</strong><strong>400</strong>de-kurz page 3/4MOBIL ELEKTRONIK GMBH • Bössingerstraße 33 • D-74243 Langenbeutingen • 07946/9194 -0 -130 • www.mobil-elektronik.com
<strong>Safety</strong> <strong>Angle</strong> <strong>Transducer</strong> <strong>Type</strong> <strong>Series</strong><strong>Potentiometric</strong> <strong>530</strong> <strong>400</strong>Connector M12x1 (flange type)pinsignal name1 positive supply2 -3 negative supply4 signal outputEquivalent circuit diagram (redundant version)Defined direction of rotationIf the supply voltage is connected according to the pin assignment, the following definition applies:With a view to the angle transducer shaft and a fixed angle transducer housing, turning the shaft clockwise(to the right) causes the signal outputs of both sensors to increase.Levers for standard version (shaft diameter 12 mm)Version k) - Technical changes due to further technical development reserved.D<strong>530</strong><strong>400</strong>de-kurz page 4/4MOBIL ELEKTRONIK GMBH • Bössingerstraße 33 • D-74243 Langenbeutingen • 07946/9194 -0 -130 • www.mobil-elektronik.com
Change language