Cold Weather Catalog - Chromalox Precision Heat and Control

Heating CableDLIntegrated ConnectionAccessories (cont’d.)RTES — End Seal KitRTES End Seal Fitting is a NEMA 4X ratedenclosure designed to terminate all ChromaloxRapid Trace Heating Cables. This modelprovides waterproof cable entry for onecable, enclosure support and a waterproofcorrosion resistant enclosure. The fi ttinghas two different curved mounting surfaces.One side has a 1-1/2" radius curved surfacethat provides stable support on pipes with adiameter of 3" or more. The other side hasa 1/2" radius curved surface which permits abetter fi t on smaller pipes. In addition, thisside also has four “feet” for installation on fl atsurfaces.EIF1.25"(3.18 cm)1.75"(4.45 cm)D2"(5.08 cm)GABCIEHConstructionABCDEFGHCable entry.Three inch diameter curved mountingsurface.Captured stainless steel hardware.One inch wide strapping channelfor secure mounting.One-half inch radius curved mountingsurface.End cap.Cable grommet provides water-tightseal between end cap and pressureplate. Use GRSR with all self-regulatingcables. Use GRCW with constant wattagecables. One of each grommet included inkit. See table below for spare grommets.Pressure plate.IMounting feet for installation on fl atsurfaces.DL Accessory ComponentsMP-1 (385780)Mounting PlateKit AttachmentsRTES — End Seal Kit1 end cap1 pressure plate1 GRSR Self-regulating cable sealing grommet1 GRCW Constant wattage cable sealinggrommetFor installing RTPC and RTST kitson fl at surfaces. Kit includes:1 mounting plate1 lock washer1 bolt1 washer1 nutOrdering Information — RTESWt.Model PCN Stock (Lbs.)RTES 389570 S 1Spare GrommetsPCNGRS RTD/Capillary type 385000GR0 Blank 385019GRSR Self-Regulating type 389714GRCW Constant wattage type 389722Note — The complete line of DL & EL MountingAccessories is located at the end of this section.134