Sensors and systems for combustion technology System ... - lamtec

FUNCTION OVERVIEWThe BT300 is available in three designs:• BT320– Two motorised continuous outputs– 1 continuous output 0...10V, 0/4...20mAfor speed control of the combustion air fan viaVMS100 (optional)– Intermittent operation• BT330– One fuel, oil or gas– 1 continuous output 0...10V, 0/4...20mAfor speed control of the combustion air fan viaVMS100 (optional)– Three motorised continuous outputs– approved for continuous operation incombination with a continuously operating flamesensor• BT340– Three motorised continuous outputs– Oil-gas dual-fuel operation via DFM300– One continuous output 0...10V, 0/4...20mAfor speed control of the combustion air fan viaVMS100 (optional)– approved for continuous operation incombination with a continuously operating flamesensor

BT300 OPERATING MODESGas operating modesOil operating modesY1GPSminY2OPSminY1Y111M2OPAPSM22FAN2FANVSM100M1VSM100M1Gas, modulating with optionalspeed control of the VL fanOil, modulating with optionalspeed control of the VL fanY2Y1GPSminY21OPSminY1Y12FANM22FANVSMM1100 M11OPAPSGas, modulating with pilot burner and optionalspeed control of the VL fanOil, 2-stageY3Y2OPSminY1Y11OPAPS2FANM1Oil, 3-stage© LAMTEC GmbH & Co.KGLAMTEC Meß- und Regeltechnikfür Feuerungen GmbH & Co. KGWiesenstraße 6D-69 190 WalldorfTelephone (+49) 06227 / 6052-0Fax (+49) 06227 / 6052-57Website: http://www.lamtec.dee-mail: info@lamtec.deLAMTEC Leipzig GmbH & Co. KGSchlesierstraße 55D-04299 LeipzigTelephone (+49) 0341 / 863294-00Fax (+49) 0341 / 863294-10Distributed by:Publication no.: DLT1202-11-aEN-001Printed in Germany