B.E.G. LUXOMAT® DIM-KNX/EIB-BUS-Detector 180°

B.E.G. LUXOMAT ® DIM-KNX/EIB-BUS-DetectorInstallation and Operating Instruction for B.E.G. - Occupancy detectors PD1N-KNX-FC, PD2-DIM-KNX/EIB-SM/-FC/-FM, PD4-DIM-KNX/EIB(-GH,-C)-SM/-FC/-FM, PD9-DIM-KNX/EIB-FC, Indoor 180-DIM-KNX/EIB-FM1a. Installation LUXOMAT ® PD2-/PD4-DIM-KNX/EIB(-GH, -C)-SMopenCcloseThe detector must be in stalled on a solid and levelsurface. The circular cover ring must be removedprior to assembly. To do this, twist the lens (C) of thePD4-DIM-KNX/EIB or (D) of the PD2-DIM-KNX/EIBanticlockwise through approximately 5° and lift off.Having connected up the wires in accordancewith regulations, secure the detector with 2 screws.After installation replace the lens and lock (turnclockwise). Mains to be connected.2. Detection areasATTENTION: Install the corridordetector (PD4-DIM-KNX/EIB-C)and the PD4-DIM-KNX-GH-SM(for high-bay storages) in such amanner, that the sensors are positionedin the longitudinal axisof the area to be monitored (e.g.high-bay corridors or corridors)!D1b. Installation LUXOMAT ® PD1N-/PD2-/PD4-/PD9-DIM-KNX/EIB(-C)-FC68 mm34 mmThe detector has been designed and developedspecifically for installation in suspendedceilings. A circular opening of diameter68 mm (PD1N/PD2/PD4-DIM-KNX/EIB) resp.30 mm (PD9-DIM-KNX/EIB) must be producedin the ceiling.Having connected up the cables in accordancewith regulations, the detector is insertedinto the opening as shown in the drawingopposite and fixed into positionwith the assistance of thespring clips.ATTENTION: Install the corridordetector (PD4-DIM-KNX/EIB-C) in such a manner, thatthe sensors are positionedin the longitudinal axis of thearea to be monitored!1c. Installation LUXOMAT ® PD2-/PD4-DIM-KNX/EIB(-C)-FMB.I.T.Q.C.PA SED1The detector can beinstalled in conventionalinlet-sockets mounted onthe ceiling. The assemblyplate enclosed mustbe stripped off prior toinstallation and secured tothe ceiling using 4 screwsand ensuring that it is notlaterally transposed.Having connected up thecables in accordance withregulations, the detectorcan be placed in positionas shown in the drawingopposite and, applyinga little pressure, can thenbe locked into positionwith the assistance of thespring clips.ATTENTION: Install thecorridor detector (PD4-DIM-KNX/EIB-C) in sucha manner, that the sensorsare positioned in the longitudinalaxis of the area toquer zum Melder gehenbe monitored!frontal zum Melder gehenUnterkriechschutzGB1d. Installation LUXOMAT ® Indoor180-DIM-KNX/EIB-UPA BFED CThe detector can be installed in conventionalinstallation sockets. Installation should be madeto a wall with a height of 1.1 to 2.2 m.Before installation, the hemispherical coveringcap(F) above the lens and the mask (E)below it need to be removed using a smallscrewdriver. After connecting the cables in accordancewith the regulations, fasten sensor (A)using 4 screws as in the sketch below.For installation outdoors, the IP54 installationset (Part-Nr. 92141) is available as anaccessory.quer zum Melder gehen1 quer Walking zum across Melder gehen 2 frontal Walking zum towards Melder gehen Seatedfrontal zum Melder gehenUnterkriechschutzPD1N-KNX PD2-DIM-KNX/EIBUnterkriechschutzPD4-DIM-KNX/EIB PD4-DIM-KNX/EIB-K (Corridor)2.50 m2,50 m2,50 m2,50 m24.20 m7.50 m4 x 90°PD4-DIM-KNX/EIB-GH-SM17.50 m210 m1PD9-DIM-KNX/EIB360°24 m6 m10 m24 m1360°PD9-DIM-KNX/EIB-GH6,40 m8 m24 m1Indoor 180-KNX/EIB20 m40 m23 m 5 m9,00 m10,00 m6,00 mRJ1,10 -2,20 m360°Ø 44 mca. 22 m2,50 m RJ 110 m360°4 m6 m10 m23,50 m6,00 m1360°3.50 m6,00 m3 m10 m1180°212 m3. Position Programming buttonPD2-DIM-KNX/EIB-SMPD4-DIM-KNX/EIB-SMPD4-DIM-KNX/EIB-GH-SMPD4-DIM-KNX/EIB-C-SMPD2-DIM-KNX/EIB-FCPD1N-KNX-FCPD4-DIM-KNX/EIB-FCPD4-DIM-KNX/EIB-C-FCProgramming buttonPD9-DIM-KNX/EIB-FC - Power supplyProgramming buttonIndoor 180-KNX/EIB-FMProgramming button

–3. Putting into operation / SettingsIn connection with the application programBEG_DIM_HKL_V4.0 there are 4 different modes available.Product data bank to be imported in the ETS data base isincluded in the delivery or can be downloaded from the B.E.G.homepage.Attention: Please do not locate the detector near a heating orair condition source!Hint: Please refer to the application description for details ofapplication programming and the communication objects!5. Article / Part-Nr. / AccessoryTyp SM FC FMPD1N-KNX – 92508 –PD2-DIM-KNX/EIB 92430 92431 92432PD4-DIM-KNX/EIB 92433 92434 92435PD4-DIM-KNX/EIB-GH 92454 – –PD4-DIM-KNX/EIB-C 92461 92456 92459PD9-DIM-KNX/EIB – 92437 –PD9-DIM-KNX/EIB-GH – 92438 –Indoor 180-DIM-KNX/EIB(Sensor insert)– – 92436Accessory:BSK Ball basket guard white 92199FC-Covering IP23 transparent 92206SM-Socket IP54 PD2-KNX/EIB white 92161SM-Blinds PD4 transparent 92260Cover ring PD9 white 92238Cover ring PD9 silver 92237Cover ring PD9 black 92235Covering Indoor 180 RAL9010 92630Covering Indoor 180 RAL9016 92631Covering Indoor 180 RAL1013 92632Covering Indoor 180 RAL9006 92633Covering Indoor 180 RAL7021 92634Covering IP54 Indoor 180 RAL9010 92139SM-Socket Indoor 180 RAL9010 921416. Technical data DIM-KNX/EIBSensor and power supply in one casePower supply: 24VDC from DIM-KNX/EIB-BUS systemCurrent absorption: 10 mAAmbient temperature: - 25°C – +55°CDegree of protection/class:PD1N/PD2/PD4-DIM-KNX/EIB(-C, -GH)SM IP20 with accessoryIP54, FC and FM IP20 / IIPD9-DIM-KNX/EIB(-GH)-FC IP20 / IIIndoor 180-DIM-KNX/EIB IP20, with accessoryIP54/IISettings: by ETS-system(Product data bank to be imported in the ETS data baseis included in the delivery or can be downloaded fomthe B.E.G. homepage.)Area of coverage:PD1N/PD2/PD4/PD9-DIM-KNX/EIBcircular 360°PD4-DIM-KNX-GH oval 360°PD4-DIM-KNX/EIB-K narrow 360°Indoor 180-DIM-KNX/EIB semicircular 180°Range of coverage:PD1N-KNXmax. 7,5 m x 7,5 m(walking across)PD2/PD9-DIM-KNX/EIB max. 10 m (walking across)PD9-DIM-KNX/EIB-GH max. 5.40 m (walking across)PD4-DIM-KNX/EIB max. 24 m (walking across)PD4-DIM-KNX/EIB-GH max. 44 m (walking across)PD4-DIM-KNX/EIB-C max. 40 m (walking across)Indoor 180-DIM-KNX/EIB max. 10 m (walking towards)Recommended height for mounting:PD1N/PD2/PD4/PD9-DIM-KNX/EIB(-C) 2 - 3 mPD4/PD9-DIM-KNX/EIB-GH2 - 10 mIndoor 180-DIM-KNX/EIB1,1 - 2,2 mLight measure: mixed light, daylight + artificial lightDimensions PD2/PD4/PD9 H x Ø [mm]:SM FC FMPD1N-KNX 106 x 90PD2-DIM-KNX/EIB 50 x 97 84,5 x 74 65 x 98PD4-DIM-KNX/EIB (-C) 73 x 100 97 x 103 97 x 103PD4-DIM-KNX/EIB-GH 73 x 100PD9-DIM-KNX/EIB 28 x 45PD9-DIM-KNX/EIB-GH 40 x 45Visible portion when built into ceiling:PD1N-KNX40 x 106 mmPD2-DIM-KNX/EIB 34 x 74 mmPD4-DIM-KNX/EIB(-GH, -C) 34 x 103 mmPD9-DIM-KNX/EIB 12 x 45 mmPD9-DIM-KNX/EIB 24 x 45 mmDimensions Indoor 180-DIM-KNX/EIB-FM:H 87 x W 87 x D 61 mmDeclaration of Conformity: The product complieswith the low voltage recommendation 2006/95/ECand the EMV recommendation 2004/108/EC7. DIM-KNX/EIB - ConnectionsConnectionPD2/PD4-DIM-KNX/EIB(-GH,-C)-SM+–24 VDCBUSConnectionPD1N/PD2/PD4-DIM-KNX/EIB,(-C)-FC and -FM+–24 VDCBUSConnectionIndoor 180-DIM-KNX/EIB-FM+–24 VDCBUS24 VDCBUSConnectionPD9-DIM-KNX/EIB(-GH)-FC - Power+–24 VDCBUSMAN 5887 – 110712 - 4+