to read a free sample chapter from this book. - Paladin Press
to read a free sample chapter from this book. - Paladin Press to read a free sample chapter from this book. - Paladin Press
Workbench SilencersOIL FILTER #4This is essentially the same design as shown on page 33. Note,however, that the oil filter is tightly clamped into the adapter. Forextra strength, it can be glued in prior to clamping. Also, althoughit is not visible, the end of the oil filter has a hole punched in itscenter. Try filling the filter with water and draining it to wet filterelement inside. This might help cool the muzzle blast gases anddampen the noise even more.52
Colt .45CLOG BUSTER #2This is simply a larger version of the device shown on page30. It has eight times the volume of its smaller counterpart and alarger, sturdier hose attachment.53
- Page 2 and 3: WARNINGIt is against the law to man
- Page 4 and 5: Workbench SilencersPVC #2 41Sprinkl
- Page 6 and 7: Workbench SilencersCOUPLING #3Cut 2
Workbench SilencersOIL FILTER #4This is essentially the same design as shown on page 33. Note,however, that the oil filter is tightly clamped in<strong>to</strong> the adapter. Forextra strength, it can be glued in prior <strong>to</strong> clamping. Also, althoughit is not visible, the end of the oil filter has a hole punched in itscenter. Try filling the filter with water and draining it <strong>to</strong> wet filterelement inside. This might help cool the muzzle blast gases anddampen the noise even more.52
Change language