1756-RM001B-EN-P, Using ControlLogix in SIL2 ... - Tuv-fs.com

PrefaceIntroductionThis application manual is intended to describe the ControlLogixControl System components available from Rockwell Automation thatare suitable for use in SIL2 applications.Manual Set-UpThis manual is designed to make clear how the ControlLogix ControlSystem can be SIL2-certified. Table Preface.1 lists the informationavailable in each section.Table Preface.1Section: Title: Description:Chapter 1 SIL Policy Introduction to the SIL policy and how thatpolicy relates to the ControlLogix system.Chapter 2 The ControlLogix System Brief overview of all the components present inthe SIL2-certified ControlLogix system.Chapter 3 ControlLogix SystemHardwareDescription of the ControlLogix power suppliesand chassis used in the SIL2-certifiedControlLogix system.Chapter 4 ControlLogix Controller Description of the ControlLogix controller usedin the SIL2-certified ControlLogix system.Chapter 5ControlLogix CommunicationsModulesDescription of the ControlLogix communicationsmodules used in the SIL2-certified ControlLogixsystem.Chapter 6 ControlLogix I/O Modules Description of the ControlLogix I/O modulesused in the SIL2-certified ControlLogix system.Chapter 7Chapter 8Chapter 9Chapter 10Appendix AAppendix BFaults in the ControlLogixSystemGeneral Requirements forApplication SoftwareTechnical SIL2 Requirementsfor the Application ProgramUse and Application ofHuman to Machine InterfacesResponse Times inControlLogixSystem Self-Testing andUser-Programmed ResponsesDescription of two common conditions thatcause a fault in a ControlLogix system.Guidelines for application development inRSLogix 5000 as they relate to SIL2.Description of technical safety necessary inSIL2-certified ControlLogix applications.Description of the precautions and techniquesthat should be used with HMI devices as theyare used in SIL2-certified ControlLogixapplications.Additional information on the componentspresent in a SIL2-certified ControlLogixapplication.Explanation of the self-testing and systemresponses to test results that are available inthe ControlLogix system.1 Publication 1756-RM001B-EN-P - October 2003