1756-RM001B-EN-P, Using ControlLogix in SIL2 ... - Tuv-fs.com
1756-RM001B-EN-P, Using ControlLogix in SIL2 ... - Tuv-fs.com
1756-RM001B-EN-P, Using ControlLogix in SIL2 ... - Tuv-fs.com
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1-6 SIL Policy<strong>SIL2</strong>-Certified <strong>ControlLogix</strong>System ComponentsTable 1.1 lists the <strong>com</strong>ponents available for use <strong>in</strong> a <strong>SIL2</strong>-certified<strong>ControlLogix</strong> system.Device Type:CatalogNumber:Hardware <strong>1756</strong>-A4, A7, A10,A13 & A17Table 1.1 Components For Use <strong>in</strong> the SIL 2 SystemDescription:Series:FirmwareRevision:(2)Related Documentation (3) withMore Information on CatalogNumber:Installation User Manual:Instructions:<strong>ControlLogix</strong> Chassis B NA <strong>1756</strong>-IN080 None availablefor these catalognumbers<strong>1756</strong>-PA75 AC Power supply A NA <strong>1756</strong>-5.78<strong>1756</strong>-PB75 DC Power supply A NA<strong>1756</strong>-PA75R AC Redundant power supply A NA <strong>1756</strong>-IN573<strong>1756</strong>-PB75R DC Redundant power supply A NA<strong>1756</strong>-PSCA Redundant Power SupplyChassis Adapter ModuleA NA <strong>1756</strong>-IN574Controller <strong>1756</strong>-L55M16 <strong>ControlLogix</strong> 7.5Mb Controller A 10.27 <strong>1756</strong>-IN101 <strong>1756</strong>-UM001I/O Modules <strong>1756</strong>-IA16I AC Isolated Input Module A 2.2 <strong>1756</strong>-IN059 <strong>1756</strong>-UM058<strong>1756</strong>-IA8D AC Diagnostic Input Module A 2.6 <strong>1756</strong>-IN055<strong>1756</strong>-IB16D DC Diagnostic Input Module A 2.6 <strong>1756</strong>-IN069<strong>1756</strong>-IB16I DC Isolated Input Module A 2.2 <strong>1756</strong>-IN010<strong>1756</strong>-OA16I AC Isolated Output Module A 2.1 <strong>1756</strong>-IN009<strong>1756</strong>-OA8D AC Diagnostic Input Module A 2.4 <strong>1756</strong>-IN057<strong>1756</strong>-OB16D DC Diagnostic Output Module A 2.3 <strong>1756</strong>-IN058<strong>1756</strong>-OB16I DC Isolated Output Module A 2.1 <strong>1756</strong>-IN512<strong>1756</strong>-OB8EI DC Isolated Output Module A 2.3 <strong>1756</strong>-IN012<strong>1756</strong>-OX8I Isolated Relay Output Module A 2.1 <strong>1756</strong>-IN513<strong>1756</strong>-IF8 Analog Input Module A 1.5 <strong>1756</strong>-IN040 <strong>1756</strong>-6.5.9<strong>1756</strong>-IR6I RTD Input module A 1.9 <strong>1756</strong>-IN014<strong>1756</strong>-IT6I Thermocouple Input module A 1.9 <strong>1756</strong>-IN037<strong>1756</strong>-OF8 Analog Output Module A 1.5 <strong>1756</strong>-5.41CommunicationModules<strong>1756</strong>-CNB<strong>1756</strong>-CNBR<strong>1756</strong>-<strong>EN</strong>BT (1)ControlNet CommunicationModuleRedundant ControlNetCommunication ModuleEtherNet CommunicationModuleD 5.27 <strong>1756</strong>-IN571 <strong>1756</strong>-6.5.3D 5.27A 1.33 <strong>1756</strong>-IN019 <strong>1756</strong>-UM050(1) The <strong>1756</strong>-<strong>EN</strong>BT module is <strong>in</strong>cluded <strong>in</strong> this table because this module can be used to connect the safety system to the EtherNet/IP network However, the EtherNet/IPnetwork is not <strong>SIL2</strong>-certified and cannot be used as part of the <strong>SIL2</strong>-certified system. It can only be used to connect non-safety devices to the safety system. Because themodule is not part of the safety system, it is not listed <strong>in</strong> PDF and PFH calculations <strong>in</strong> Table 1.3 and Table 1.4 later <strong>in</strong> this chapter.(2)Users must use these series and firmware revisions for their application to be <strong>SIL2</strong> certified. Firmware revisions are available by visit<strong>in</strong>ghttp://support.rockwellautomation.<strong>com</strong>/ControlFlash/(3) These publications are available from Rockwell Automation by visit<strong>in</strong>g http://www.theautomationbookstore.<strong>com</strong> or http://www.ab.<strong>com</strong>/manuals.Publication <strong>1756</strong>-<strong>RM001B</strong>-<strong>EN</strong>-P - October 2003
Change language