Intel® 945G/945GZ/945GC/ 945P/945PL Express Chipset Family ...

More documents

Recommendations

Info

Host-PCI Express* Bridge Registers (D1:F0) (Intel® 82945G/82945GC/82945P/82945PL Only) 5.1.47 PVCCAP2—Port VC Capability Register 2 (D1:F0) PCI Device: 1 Address Offset: 108–10Bh Default Value: 00000001h Access: RO Size: 32 bits This register describes the configuration of PCI Express Virtual Channels associated with this port. Bit Access & Default 31:24 RO 00h 23:8 Reserved 7:0 RO 01h Description VC Arbitration Table Offset: This field indicates the location of the VC arbitration table. This field contains the zero-based offset of the table in DQWords (16 bytes) from the base address of the Virtual Channel capability structure. A value of 0 indicates that the table is not present (due to fixed VC priority). VC Arbitration Capability: This field indicates that the only possible VC arbitration scheme is hardware fixed (in the root complex). VC1 is the highest priority, VC0 is the lowest priority. 5.1.48 PVCCTL—Port VC Control (D1:F0) PCI Device: 1 Address Offset: 10C–10Dh Default Value: 0000h Access: R/W Size: 16 bits Bit Access & Default 15:4 Reserved 3:1 R/W 000b 0 Reserved Description VC Arbitration Select: This field is programmed by software to the only possible value as indicated in the VC Arbitration Capability field. The value 001b, when written to this field, indicates the VC arbitration scheme is hardware fixed (in the root complex). This field can not be modified when more than one VC in the LPVC group is enabled. 148 Intel ® 82945G/82945GZ/82945GC GMCH and 82945P/82945PL MCH Datasheet
Host-PCI Express* Bridge Registers (D1:F0) (Intel® 82945G/82945GC/82945P/82945PL Only) 5.1.49 VC0RCAP—VC0 Resource Capability (D1:F0) PCI Device: 1 Address Offset: 110–113h Default Value: 00000000h Access: RO Size: 32 bits Bit Access & Default 31:16 Reserved 15 RO 0b 14:0 Reserved Reject Snoop Transactions Description 0 = Transactions with or without the No Snoop bit set within the TLP header are allowed on this VC. 1 = Any transaction without the No Snoop bit set within the TLP header will be rejected as an Unsupported Request. 5.1.50 VC0RCTL—VC0 Resource Control (D1:F0) PCI Device: 1 Address Offset: 114–117h Default Value: 800000FFh Access: RO, R/W Size: 32 bits This register controls the resources associated with PCI Express Virtual Channel 0. Bit Access & Default 31 RO 1b 30:27 Reserved 26:24 RO 000b 23:8 Reserved 7:1 R/W 7Fh 0 RO 1b Description VC0 Enable: For VC0, this bit is hardwired to 1 and read only as VC0 can never be disabled. VC0 ID: This field assigns a VC ID to the VC resource. For VC0, this is hardwired to 0 and read only. TC/VC0 Map: This field indicates the TCs (Traffic Classes) that are mapped to the VC resource. Bit locations within this field correspond to TC values. For example, when bit 7 is set in this field, TC7 is mapped to this VC resource. When more than one bit in this field is set, it indicates that multiple TCs are mapped to the VC resource. To remove one or more TCs from the TC/VC map of an enabled VC, software must ensure that no new or outstanding transactions with the TC labels are targeted at the given Link. TC0/VC0 Map: Traffic Class 0 is always routed to VC0. Intel ® 82945G/82945G/82945GC GMCH and 82945P/82945PL MCH Datasheet 149
Page 1 and 2:
Intel ® 945G/945GZ/945GC/ 945P/945
Page 3 and 4:
Contents 1 Introduction ...........
Page 5 and 6:
4.2.11 C0DRC1—Channel A DRAM Cont
Page 7 and 8:
6.1.16 DMICESTS—DMI Correctable E
Page 9 and 10:
9.4.5 SMM Space Decode and Transact
Page 11 and 12:
11.3 DC Characteristics ...........
Page 13 and 14:
Revision History Rev Description Da
Page 15 and 16:
Intel ® 82945G/82945GZ/82945GC/829
Page 17 and 18:
1 Introduction Introduction The Int
Page 19 and 20:
Figure 1-2. Intel ® 945GZ/82945GC
Page 21 and 22:
1.1 Terminology Term Description Ac
Page 23 and 24:
Term Description TOLM Top Of Low Me
Page 25 and 26:
Introduction � Supports four bank
Page 27 and 28:
Introduction 1.4 Graphics (Intel ®
Page 29 and 30:
1.5 Analog and SDVO Displays (Intel
Page 31 and 32:
2 Signal Description Signal Descrip
Page 33 and 34:
2.1 Host Interface Signals Signal D
Page 35 and 36:
Signal Name Type Description HREQ[4
Page 37 and 38:
2.3 DDR2 DRAM Channel B Interface S
Page 39 and 40:
Signal Description 2.6 Analog Displ
Page 41 and 42:
2.8 Direct Media Interface (DMI) Si
Page 43 and 44:
2.10 Power and Ground Name Voltage
Page 45 and 46:
Interface Signal Name I/O System Me
Page 47 and 48:
Interface Signal Name I/O State Dur
Page 49 and 50:
3 Register Description Register Des
Page 51 and 52:
Register Description Note: A physic
Page 53 and 54:
3.3 Configuration Mechanisms Regist
Page 55 and 56:
3.4 Routing Configuration Accesses
Page 57 and 58:
3.4.2.2 DMI Configuration Accesses
Page 59 and 60:
Bit Access & Default 10:8 R/W 000b
Page 61 and 62:
Host Bridge/DRAM Controller Registe
Page 63 and 64:
4.1 Device 0 Configuration Register
Page 65 and 66:
4.1.4 PCISTS—PCI Status (D0:F0) P
Page 67 and 68:
4.1.7 MLT—Master Latency Timer (D
Page 69 and 70:
4.1.12 EPBAR—Egress Port Base Add
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
4.1.19 PAM1—Programmable Attribut
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
4.1.25 LAC—Legacy Access Control
Page 85 and 86:
Page 87 and 88:
4.1.29 ERRSTS—Error Status (D0:F0
Page 89 and 90:
4.1.31 SKPD—Scratchpad Data (D0:F
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
4.2.7 C0DCLKDIS—Channel A DRAM Cl
Page 97 and 98: 4.2.9 C0DRT1—Channel A DRAM Timin
Page 99 and 100: Bit Access & Default 6:4 R/W 000b 3
Page 101 and 102: Host Bridge/DRAM Controller Registe
Page 103 and 104: 4.2.24 PMSTS—Power Management Sta
Page 105 and 106: 4.3.1 EPESD—EP Element Self Descr
Page 107 and 108: 4.3.3 EPLE1A—EP Link Entry 1 Addr
Page 109 and 110: Host-PCI Express* Bridge Registers
Page 111 and 112: Address Offset Host-PCI Express* Br
Page 113 and 114: 5.1.3 PCICMD1—PCI Command (D1:F0)
Page 115 and 116: 5.1.4 PCISTS1—PCI Status (D1:F0)
Page 117 and 118: 5.1.7 CL1—Cache Line Size (D1:F0)
Page 119 and 120: 5.1.12 IOBASE1—I/O Base Address (
Page 121 and 122: 5.1.15 MBASE1—Memory Base Address
Page 125 and 126: 5.1.20 INTRLINE1—Interrupt Line (
Page 127 and 128: Bit Access & Default 2 R/W 0b 1 R/W
Page 133 and 134: 5.1.29 MA—Message Address (D1:F0)
Page 135 and 136: 5.1.33 DCAP—Device Capabilities (
Page 137 and 138: 5.1.35 DSTS—Device Status (D1:F0)
Page 139 and 140: 5.1.37 LCTL—Link Control (D1:F0)
Page 141 and 142: 5.1.39 SLOTCAP—Slot Capabilities
Page 143 and 144: 5.1.41 SLOTSTS—Slot Status (D1:F0
Page 145 and 146: 5.1.43 RSTS—Root Status (D1:F0) P
Page 147: Host-PCI Express* Bridge Registers
Page 153 and 154: 5.1.56 ESD—Element Self Descripti
Page 157 and 158: 5.1.61 CESTS—Correctable Error St
Page 161 and 162: Direct Media Interface (DMI) RCRB 6
Page 163 and 164: 6.1.3 DMIPVCCAP2—DMI Port VC Capa
Page 165 and 166: 6.1.6 DMIVC0RCTL—DMI VC0 Resource
Page 167 and 168: 6.1.9 DMIVC1RCTL—DMI VC1 Resource
Page 169 and 170: 6.1.13 DMILSTS—DMI Link Status MM
Page 171 and 172: 6.1.15 DMIUEMSK—DMI Uncorrectable
Page 173 and 174: Integrated Graphics Device (D2:F0)
Page 177 and 178: 7.1.4 PCISTS2—PCI Status (D2:F0)
Page 179 and 180: 7.1.7 CLS—Cache Line Size (D2:F0)
Page 181 and 182: 7.1.11 IOBAR—I/O Base Address (D2
Page 185 and 186: 7.1.20 MINGNT—Minimum Grant (D2:F
Page 193 and 194: 8.1.3 PCICMD2—PCI Command (D2:F1)
Page 195 and 196: 8.1.5 RID2—Revision Identificatio
Page 199 and 200:
Integrated Graphics Device (D2:F1)
Page 201 and 202:
Integrated Graphics Device (D2:F1)
Page 203 and 204:
8.2 Device 2 - PCI I/O Registers In
Page 205 and 206:
9 System Address Map System Address
Page 207 and 208:
Figure 9-1. System Address Ranges 4
Page 209 and 210:
Compatible SMRAM Address Range (A_0
Page 211 and 212:
9.2 Main Memory Address Range (1 MB
Page 213 and 214:
9.3 PCI Memory Address Range (TOLUD
Page 215 and 216:
9.3.6 PCI Express* Graphics Attach
Page 217 and 218:
9.4.1 SMM Space Definition System A
Page 219 and 220:
9.4.5 SMM Space Decode and Transact
Page 221 and 222:
9.4.12 Legacy VGA and I/O Range Dec
Page 223 and 224:
10 Functional Description This chap
Page 225 and 226:
Interleaved Mode Functional Descrip
Page 227 and 228:
667 MHz (PC 5300) (82945G/82945GC/8
Page 229 and 230:
10.2.2.2 System Memory Supported Co
Page 231 and 232:
Functional Description Table 10-5.
Page 233 and 234:
10.3 PCI Express* (Intel ® 82945G/
Page 235 and 236:
Figure 10-2. SDVO Conceptual Block
Page 237 and 238:
Figure 10-3. Concurrent SDVO / PCI
Page 239 and 240:
10.5 Integrated Graphics Device (In
Page 241 and 242:
10.5.3 4X Faster Setup Engine Funct
Page 243 and 244:
10.5.4 Texture Engine Functional De
Page 245 and 246:
10.5.4.8 Pixel Shader Functional De
Page 247 and 248:
Functional Description to determine
Page 249 and 250:
10.5.6 2D Engine Functional Descrip
Page 251 and 252:
10.5.8.1 Cursor Plane Functional De
Page 253 and 254:
Functional Description device is in
Page 255 and 256:
10.6.2 Digital Display Interface Fu
Page 257 and 258:
10.6.2.1.5 Control Bus Functional D
Page 259 and 260:
Figure 10-7 illustrates the various
Page 261 and 262:
11 Electrical Characteristics Elect
Page 263 and 264:
11.1.1 Power Characteristics Table
Page 265 and 266:
Signal Group Electrical Characteris
Page 267 and 268:
11.3 DC Characteristics Table 11-5.
Page 269 and 270:
Symbol Signal Group Electrical Char
Page 271 and 272:
Ballout and Package Information 12
Page 273 and 274:
Ballout and Package Information Fig
Page 275 and 276:
12.2 Ballout Table Ballout and Pack
Page 277 and 278:
Ballout and Package Information EXP
Page 279 and 280:
Ballout and Package Information HA2
Page 281 and 282:
Ballout and Package Information HD6
Page 283 and 284:
Ballout and Package Information RSV
Page 285 and 286:
Ballout and Package Information SDM
Page 287 and 288:
Ballout and Package Information SDQ
Page 289 and 290:
Ballout and Package Information SDQ
Page 291 and 292:
Ballout and Package Information VCC
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Ballout and Package Information VSS
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
12.3 Package § Ballout and Package
Page 307 and 308:
Ballout and Package Information Int
Page 309 and 310:
13.2 XOR Test Mode Initialization T
Page 311 and 312:
13.4 XOR Chains Testability Table 1
Page 313 and 314:
Table 13-5. XOR Chain 2 Pin Count B
Page 315 and 316:
Table 13-8. XOR Chain 5 Pin Count B
Page 317 and 318:
Table 13-11. XOR Chain 8 Pin Count
show all

Intel® 945G/945GZ/945GC/ 945P/945PL Express Chipset Family ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?