Intel® 945G/945GZ/945GC/ 945P/945PL Express Chipset Family ...

More documents

Recommendations

Info

Host-PCI Express* Bridge Registers (D1:F0) (Intel® 82945G/82945GC/82945P/82945PL Only) 5.1.44 PEG_LC—PCI Express* Legacy Control (D1:F0) PCI Device: 1 Address Offset: EC–EFh Default Value: 00000000h Access: R/W Size: 32 bits This register controls functionality that is needed by legacy (non-PCI Express aware) operating systems during run time. Bit Access & Default 31:3 Reserved 2 R/W 0b 1 R/W 0b 0 R/W 0b PME GPE Enable (PMEGPE): Description 0 = Disable. Do Not generate GPE PME message when PME is received. 1 = Enable. Generate a GPE PME message when PME is received (Assert_PMEGPE and Deassert_PMEGPE messages on DMI). This enables the (G)MCH to support PMEs on the PCI Express* port under legacy operating systems. Hot-Plug GPE Enable (HPGPE): 0 = Disable. Do Not generate GPE hot-plug message when a hot-plug event is received. 1 = Enable. Generate a GPE hot-plug message when a hot-plug event is received (Assert_HPGPE and Deassert_HPGPE messages on DMI). This enables the (G)MCH to support Hot-Plug on the PCI Express port under legacy operating systems. General Message GPE Enable (GENGPE): 0 = Disable. Do Not forward received GPE assert/de-assert messages. 1 = Enable. Forward received GPE assert/de-assert messages. These general GPE message can be received via the PCI Express port from an external Intel device and will be subsequently forwarded to the Intel ® ICH7 (via Assert_GPE and Deassert_GPE messages on DMI). 146 Intel ® 82945G/82945GZ/82945GC GMCH and 82945P/82945PL MCH Datasheet
Host-PCI Express* Bridge Registers (D1:F0) (Intel® 82945G/82945GC/82945P/82945PL Only) 5.1.45 VCECH—Virtual Channel Enhanced Capability Header (D1:F0) PCI Device: 1 Address Offset: 100–103h Default Value: 14010002h Access: RO Size: 32 bits This register indicates PCI Express device Virtual Channel capabilities. Note: Extended capability structures for PCI Express devices are located in PCI Express extended configuration space and have different field definitions than standard PCI capability structures. Bit Access & Default 31:20 RO 140h 19:16 RO 1h 15:0 RO 0002h Description Pointer to Next Capability: The Link Declaration Capability is the next in the PCI Express* extended capabilities list. PCI Express Virtual Channel Capability Version: Hardwired to 1 to indicate compliances with the PCI Express specification, Revsion 1.0a. Extended Capability ID: A value of 0002h identifies this linked list item (capability structure) as being for PCI Express Virtual Channel registers. 5.1.46 PVCCAP1—Port VC Capability Register 1 (D1:F0) PCI Device: 1 Address Offset: 104h Default Value: 00000001h Access: RO, R/WO Size: 32 bits This register describes the configuration of PCI Express Virtual Channels associated with this port. Bit Access & Default 31:7 Reserved 6:4 RO 000b 3 Reserved 2:0 R/WO 001b Description Low Priority Extended VC Count: This field indicates the number of (extended) Virtual Channels in addition to the default VC belonging to the low-priority VC (LPVC) group that has the lowest priority with respect to other VC resources in a strict-priority VC Arbitration. The value of 0 in this field implies strict VC arbitration. Extended VC Count: This field indicates the number of (extended) Virtual Channels in addition to the default VC supported by the device. BIOS Requirement: Set this field to 000b for all configurations. Intel ® 82945G/82945G/82945GC GMCH and 82945P/82945PL MCH Datasheet 147
Page 1 and 2:
Intel ® 945G/945GZ/945GC/ 945P/945
Page 3 and 4:
Contents 1 Introduction ...........
Page 5 and 6:
4.2.11 C0DRC1—Channel A DRAM Cont
Page 7 and 8:
6.1.16 DMICESTS—DMI Correctable E
Page 9 and 10:
9.4.5 SMM Space Decode and Transact
Page 11 and 12:
11.3 DC Characteristics ...........
Page 13 and 14:
Revision History Rev Description Da
Page 15 and 16:
Intel ® 82945G/82945GZ/82945GC/829
Page 17 and 18:
1 Introduction Introduction The Int
Page 19 and 20:
Figure 1-2. Intel ® 945GZ/82945GC
Page 21 and 22:
1.1 Terminology Term Description Ac
Page 23 and 24:
Term Description TOLM Top Of Low Me
Page 25 and 26:
Introduction � Supports four bank
Page 27 and 28:
Introduction 1.4 Graphics (Intel ®
Page 29 and 30:
1.5 Analog and SDVO Displays (Intel
Page 31 and 32:
2 Signal Description Signal Descrip
Page 33 and 34:
2.1 Host Interface Signals Signal D
Page 35 and 36:
Signal Name Type Description HREQ[4
Page 37 and 38:
2.3 DDR2 DRAM Channel B Interface S
Page 39 and 40:
Signal Description 2.6 Analog Displ
Page 41 and 42:
2.8 Direct Media Interface (DMI) Si
Page 43 and 44:
2.10 Power and Ground Name Voltage
Page 45 and 46:
Interface Signal Name I/O System Me
Page 47 and 48:
Interface Signal Name I/O State Dur
Page 49 and 50:
3 Register Description Register Des
Page 51 and 52:
Register Description Note: A physic
Page 53 and 54:
3.3 Configuration Mechanisms Regist
Page 55 and 56:
3.4 Routing Configuration Accesses
Page 57 and 58:
3.4.2.2 DMI Configuration Accesses
Page 59 and 60:
Bit Access & Default 10:8 R/W 000b
Page 61 and 62:
Host Bridge/DRAM Controller Registe
Page 63 and 64:
4.1 Device 0 Configuration Register
Page 65 and 66:
4.1.4 PCISTS—PCI Status (D0:F0) P
Page 67 and 68:
4.1.7 MLT—Master Latency Timer (D
Page 69 and 70:
4.1.12 EPBAR—Egress Port Base Add
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
4.1.19 PAM1—Programmable Attribut
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
4.1.25 LAC—Legacy Access Control
Page 85 and 86:
Page 87 and 88:
4.1.29 ERRSTS—Error Status (D0:F0
Page 89 and 90:
4.1.31 SKPD—Scratchpad Data (D0:F
Page 91 and 92:
Page 93 and 94:
Page 95 and 96: 4.2.7 C0DCLKDIS—Channel A DRAM Cl
Page 97 and 98: 4.2.9 C0DRT1—Channel A DRAM Timin
Page 99 and 100: Bit Access & Default 6:4 R/W 000b 3
Page 101 and 102: Host Bridge/DRAM Controller Registe
Page 103 and 104: 4.2.24 PMSTS—Power Management Sta
Page 105 and 106: 4.3.1 EPESD—EP Element Self Descr
Page 107 and 108: 4.3.3 EPLE1A—EP Link Entry 1 Addr
Page 109 and 110: Host-PCI Express* Bridge Registers
Page 111 and 112: Address Offset Host-PCI Express* Br
Page 113 and 114: 5.1.3 PCICMD1—PCI Command (D1:F0)
Page 115 and 116: 5.1.4 PCISTS1—PCI Status (D1:F0)
Page 117 and 118: 5.1.7 CL1—Cache Line Size (D1:F0)
Page 119 and 120: 5.1.12 IOBASE1—I/O Base Address (
Page 121 and 122: 5.1.15 MBASE1—Memory Base Address
Page 125 and 126: 5.1.20 INTRLINE1—Interrupt Line (
Page 127 and 128: Bit Access & Default 2 R/W 0b 1 R/W
Page 133 and 134: 5.1.29 MA—Message Address (D1:F0)
Page 135 and 136: 5.1.33 DCAP—Device Capabilities (
Page 137 and 138: 5.1.35 DSTS—Device Status (D1:F0)
Page 139 and 140: 5.1.37 LCTL—Link Control (D1:F0)
Page 141 and 142: 5.1.39 SLOTCAP—Slot Capabilities
Page 143 and 144: 5.1.41 SLOTSTS—Slot Status (D1:F0
Page 145: 5.1.43 RSTS—Root Status (D1:F0) P
Page 153 and 154: 5.1.56 ESD—Element Self Descripti
Page 157 and 158: 5.1.61 CESTS—Correctable Error St
Page 161 and 162: Direct Media Interface (DMI) RCRB 6
Page 163 and 164: 6.1.3 DMIPVCCAP2—DMI Port VC Capa
Page 165 and 166: 6.1.6 DMIVC0RCTL—DMI VC0 Resource
Page 167 and 168: 6.1.9 DMIVC1RCTL—DMI VC1 Resource
Page 169 and 170: 6.1.13 DMILSTS—DMI Link Status MM
Page 171 and 172: 6.1.15 DMIUEMSK—DMI Uncorrectable
Page 173 and 174: Integrated Graphics Device (D2:F0)
Page 177 and 178: 7.1.4 PCISTS2—PCI Status (D2:F0)
Page 179 and 180: 7.1.7 CLS—Cache Line Size (D2:F0)
Page 181 and 182: 7.1.11 IOBAR—I/O Base Address (D2
Page 185 and 186: 7.1.20 MINGNT—Minimum Grant (D2:F
Page 193 and 194: 8.1.3 PCICMD2—PCI Command (D2:F1)
Page 195 and 196: 8.1.5 RID2—Revision Identificatio
Page 197 and 198:
Integrated Graphics Device (D2:F1)
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
8.2 Device 2 - PCI I/O Registers In
Page 205 and 206:
9 System Address Map System Address
Page 207 and 208:
Figure 9-1. System Address Ranges 4
Page 209 and 210:
Compatible SMRAM Address Range (A_0
Page 211 and 212:
9.2 Main Memory Address Range (1 MB
Page 213 and 214:
9.3 PCI Memory Address Range (TOLUD
Page 215 and 216:
9.3.6 PCI Express* Graphics Attach
Page 217 and 218:
9.4.1 SMM Space Definition System A
Page 219 and 220:
9.4.5 SMM Space Decode and Transact
Page 221 and 222:
9.4.12 Legacy VGA and I/O Range Dec
Page 223 and 224:
10 Functional Description This chap
Page 225 and 226:
Interleaved Mode Functional Descrip
Page 227 and 228:
667 MHz (PC 5300) (82945G/82945GC/8
Page 229 and 230:
10.2.2.2 System Memory Supported Co
Page 231 and 232:
Functional Description Table 10-5.
Page 233 and 234:
10.3 PCI Express* (Intel ® 82945G/
Page 235 and 236:
Figure 10-2. SDVO Conceptual Block
Page 237 and 238:
Figure 10-3. Concurrent SDVO / PCI
Page 239 and 240:
10.5 Integrated Graphics Device (In
Page 241 and 242:
10.5.3 4X Faster Setup Engine Funct
Page 243 and 244:
10.5.4 Texture Engine Functional De
Page 245 and 246:
10.5.4.8 Pixel Shader Functional De
Page 247 and 248:
Functional Description to determine
Page 249 and 250:
10.5.6 2D Engine Functional Descrip
Page 251 and 252:
10.5.8.1 Cursor Plane Functional De
Page 253 and 254:
Functional Description device is in
Page 255 and 256:
10.6.2 Digital Display Interface Fu
Page 257 and 258:
10.6.2.1.5 Control Bus Functional D
Page 259 and 260:
Figure 10-7 illustrates the various
Page 261 and 262:
11 Electrical Characteristics Elect
Page 263 and 264:
11.1.1 Power Characteristics Table
Page 265 and 266:
Signal Group Electrical Characteris
Page 267 and 268:
11.3 DC Characteristics Table 11-5.
Page 269 and 270:
Symbol Signal Group Electrical Char
Page 271 and 272:
Ballout and Package Information 12
Page 273 and 274:
Ballout and Package Information Fig
Page 275 and 276:
12.2 Ballout Table Ballout and Pack
Page 277 and 278:
Ballout and Package Information EXP
Page 279 and 280:
Ballout and Package Information HA2
Page 281 and 282:
Ballout and Package Information HD6
Page 283 and 284:
Ballout and Package Information RSV
Page 285 and 286:
Ballout and Package Information SDM
Page 287 and 288:
Ballout and Package Information SDQ
Page 289 and 290:
Ballout and Package Information SDQ
Page 291 and 292:
Ballout and Package Information VCC
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Ballout and Package Information VSS
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
12.3 Package § Ballout and Package
Page 307 and 308:
Ballout and Package Information Int
Page 309 and 310:
13.2 XOR Test Mode Initialization T
Page 311 and 312:
13.4 XOR Chains Testability Table 1
Page 313 and 314:
Table 13-5. XOR Chain 2 Pin Count B
Page 315 and 316:
Table 13-8. XOR Chain 5 Pin Count B
Page 317 and 318:
Table 13-11. XOR Chain 8 Pin Count
show all

Intel® 945G/945GZ/945GC/ 945P/945PL Express Chipset Family ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?