DATA SHEET - Glyn High-Tech Distribution

DATA SHEET - Glyn High-Tech Distribution DATA SHEET - Glyn High-Tech Distribution

11.07.2015 Views

HX8346-A(T)240RGBx320 dots, 262K color TFT controller driver7.3 Column Address Start Register (R02~03h)DATA SHEET V01Figure 7. 3 Column Address Start Register Upper Byte (R02h)Figure 7. 4 Column Address Start Register Low Byte (R03h)7.4 Column Address End Register (R04~05h)Figure 7. 5 Column Address End Register Upper Byte (R04h)Figure 7. 6 Column Address End Register Low Byte (R05h)7.5 Row Address Start Register (R06~07h)Figure 7. 7 Row Address Start Register Upper Byte (R06h)Figure 7. 8 Row Address Start Register Low Byte (R07h)Himax ConfidentialThis information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosedin whole or in part without prior written permission of Himax.-P.89-July, 2007

HX8346-A(T)240RGBx320 dots, 262K color TFT controller driver7.6 Row Address End Register (R08~09h)DATA SHEET V01Figure 7. 9 Row Address End Register Upper Byte (R08h)Figure 7. 10 Row Address End Register Low Byte (R09h)These commands (R02h~R09h) are used to define area of frame memory whereMCU can access. These commands make no change on the other driver status. Thevalues of SC[15:0], EC[15:0], SP[15:0] and EP[15:0] are referred when RAMWRcommand comes. Each value represents one Page line in the Frame Memory.7.7 Partial Area Start Row Register (R0A~0Bh)Figure 7. 11 Partial Area Start Row Register Upper Byte (R0Ah)Figure 7. 12 Partial Area Start Row Register Low Byte (R0Bh)Himax ConfidentialThis information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosedin whole or in part without prior written permission of Himax.-P.90-July, 2007

HX8346-A(T)240RGBx320 dots, 262K color TFT controller driver7.6 Row Address End Register (R08~09h)<strong>DATA</strong> <strong>SHEET</strong> V01Figure 7. 9 Row Address End Register Upper Byte (R08h)Figure 7. 10 Row Address End Register Low Byte (R09h)These commands (R02h~R09h) are used to define area of frame memory whereMCU can access. These commands make no change on the other driver status. Thevalues of SC[15:0], EC[15:0], SP[15:0] and EP[15:0] are referred when RAMWRcommand comes. Each value represents one Page line in the Frame Memory.7.7 Partial Area Start Row Register (R0A~0Bh)Figure 7. 11 Partial Area Start Row Register Upper Byte (R0Ah)Figure 7. 12 Partial Area Start Row Register Low Byte (R0Bh)Himax ConfidentialThis information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosedin whole or in part without prior written permission of Himax.-P.90-July, 2007

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!