Facility Explorer FX06 Field Controller Product Bulletin - klimagra

Programming KeyThe FX06 is a fully programmable or configurablecontroller. You can download the application to thecontroller via personal computer with FX Tools or youcan upload or download the application via the FXProgramming Key (Figure 6).Figure 5: Room Command ModuleThe Room Command Module for North America ismarked with dual temperature units (°F and °C).FX ToolsFX Tools is a software suite used to program, download,test, and commission the Facility Explorer devices,including the FX06 field controller. FX Tools software isavailable in two versions: FX Tools Express and FXTools Pro. They comprise one or more of the following,depending on the version:• FX Builder Express: Used to select a standardapplication and configure it using a graphical userinterface.• FX Builder: Used to program an FX06 controller.FX Builder provides complete flexibility inprogramming the FX06 controller.• FX CommPro: Used to download, test, andcommission an FX06 controller on an N2 Open bus.• FX CommPro LON: Used to download, test, andcommission an FX06 controller on a LONWORKSnetwork.Figure 6: FX Programming KeyIMPORTANT: Use this FX06 controller only asan operating control. Where failure or malfunction ofthe FX06 could lead to personal injury or damage tothe controlled equipment or other property, additionalprecautions must be designed into the control system.Incorporate and maintain other devices such assupervisory or alarm systems or safety or limit controlsthat are intended to warn of, or protect against, failureor malfunction of the FX06 controller.4 FX06 Field Controller Product Bulletin