Dispersions Adhesives - Walther Pilot

Adhesive Spraying System 5Spray boothsfor automatic spray guns and barrels or containers Adhesive spray booths Type 2000in various sizesThe 1.10 m and 1.50 m wide basicelements of the 2000 Series can bejoined together to form any widthrequired. The folding support frameallows filters to be changed easilyand quickly. It also ensures that thefilter mat (multi-layer paper filter)is held securely in place.Spraying Systems forDispersion Adhesives(PU Materials)Basic version: spray booth withoutlower frame. Optional: lower framesin the sizes required.Delivery includes:● Automatic spray gunsPILOT WA 723-ND-K for evencoating of all sides of a workpiece.Nozzle diameter: 1.5 mm● Diaphragm pump MBP 8034,polypropylene, with a suction hosefor 1,000-litre containers● Surge suppressor● Compressed air unit Type A● Material distributorExtended version:as above, but with pneumaticcontrol cabinetCompressed air fittingsAll of the adhesive spraying systems shown hererequire clean compressed air.Left: H1 air filter with compressed air reduction valve.Centre: H2 compressed air unit complete withstop valve, filter, air valve, air reduction valve.Right: Type A compressed air unit – as H2 but withadditional air reduction valve.Spray guncleaning seteconomical – efficient – material-friendlyAdhesive spraying systems withautomatic spray guns are notavailable “off the peg”.Please contact us.We will be pleased to planthe optimum system solutiontogether with you.WALTHER Spritz- und Lackiersysteme GmbHKärntner Str. 18-30 · D-42327 WuppertalTel.: D-202/787-0 · Fax: D-202/787-217info@walther-pilot.dewww.walther-pilot.de

Adhesive Spraying System 1 Adhesive Spraying System 3 Adhesive Spraying System 4HVLP-Spray gun for use with adhesivesDelivery includes:HVLP spray gun PILOT Premium ND-Kwith plastic gravity-feed cup 600 ccm, nozzlediameter 1.5 mm. All wetted parts are madeof stainless steel.Spray gun versionfor connection topressure tanks orpumps.The PILOT Premium ND-Kis an HVLP spray gun modeland therefore offers a particularlyhigh transferefficiency. Shear-sensitiveadhesives can be sprayedeconomically and withoutdamaging the material.Adhesive Spraying System 2Pressure tank for use with 10-litre drumsBasic version. Delivery includes:● Spray gun PILOT Premium ND-K orwith front piece for connection to tanks,nozzle diameter 1.5 mm● Material pressure tank MDG 22,galvanised version, incl. fittings,pipe to material outlet in stainlesssteel, designed for a max. pressure of6 bar. For connection of a spray gun,the compressed air inlet fitting is equippedwith an additional compressed airreduction valve.● Hose set for compressed air and materialincluding all connection fittings.Extended version:As above, but with an additional spray gunPILOT Premium-ND-K for a further workplaceas well as an additional compressed airreduction valve.Pressure tank for use with 30-litre drumsBasic version. Delivery includes:● HVLP spray gun PILOT Premium ND-K forconnection to pressure tanks, nozzle diameter1.5 mm● Material pressure tank MDG 45, galvanisedversion, incl. fittings, material ductand outlet in stainless steel, designed fora max. pressure of 4 bar. For connectionof the spray gun, the compressed air inletfitting is equipped with an additional compressedair reduction valve.● Hose set for compressed air and materialincluding all connection fittings.Extended version:As above, but with an additionalspray gun PILOT Premium-ND-K fora further workplace as well asan additional compressed airreduction valve.Important:Do not pour the adhesive directlyinto the pressure tank. Place thedrum containing the adhesiveinto the pressure tank.This avoids time-consuming tankcleaning.Pressure tanks offerdecisive advantages:● Secure storage of the material● Pulsation-free transfer● No hardening● No skin formation of the surfaceDual-diaphragm pump for transferring theadhesive from drums larger than30 litres and for barrelsand containersBasic version.Delivery includes:● HVLP spray gun PILOT Premium ND-Kfor connection to pumps or pressuretanks, nozzle diameter 1.5 mm.● Diaphragm pump Type MDB 8034 inpolypropylene with a connecting pipefor containers● Surge suppressor● Compressed air unit type A● Hose set for compressed air andmaterial including connection fittings.Extended version:As above, but with a second outlet point and an additionalHVLP spray gun PILOT Premium for a further workplace as wellas an additional compressed air reduction valve.The adhesive transfer system witha diaphragm pump and a surge tank isoptimally suited for spraying shear-sensitivematerials. It is ideal for use with alldrum sizes – from 30-litre can to1000-litre containers. All wetted partsare made of stainless steel or plastic.